HTS Chapter 84
1694 tariff lines in this chapter.
- 8401.10.0000 — Nuclear reactors
- 8401.20.0000 — Machinery and apparatus for isotopic separation, and parts thereof
- 8401.30.0000 — Fuel elements (cartridges), non-irradiated, and parts thereof
- 8401.40.0000 — Parts of nuclear reactors
- 8402.11.0000 — Watertube boilers with a steam production exceeding 45 t per hour
- 8402.12.0000 — Watertube boilers with a steam production not exceeding 45 t per hour
- 8402.19.0000 — Other vapor generating boilers, including hybrid boilers
- 8402.20.0000 — Super-heated water boilers
- 8402.90.0010 — Heat exchangers
- 8402.90.0090 — Other
- 8403.10.0000 — Boilers
- 8403.90.0000 — Parts
- 8404.10.0010 — Economizers
- 8404.10.0050 — Other
- 8404.20.0000 — Condensers for steam or other vapor power units
- 8404.90.0000 — Parts
- 8405.10.0000 — Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers
- 8405.90.0000 — Parts
- 8406.10.1000 — Steam turbines
- 8406.10.9000 — Other
- 8406.81.1020 — Stationary steam turbines, condensing type
- 8406.81.1070 — Other
- 8406.81.9000 — Other
- 8406.82.1010 — Not exceeding 7,460 kW
- 8406.82.1020 — Exceeding 7,460 kW
- 8406.82.1050 — Not exceeding 7,460 kW
- 8406.82.1070 — Exceeding 7,460 kW
- 8406.82.9000 — Other
- 8406.90.2000 — Rotors, finished for final assembly
- 8406.90.3000 — Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery
- 8406.90.4000 — Blades, rotating or stationary
- 8406.90.4540 — Rotors or spindles and rotor or spindle assemblies
- 8406.90.4580 — Other
- 8406.90.5000 — Rotors, finished for final assembly
- 8406.90.6000 — Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery
- 8406.90.7000 — Blades, rotating or stationary
- 8406.90.7500 — Other
- 8407.10.0020 — Less than 373 kW
- 8407.10.0040 — 373 kW or over
- 8407.10.0060 — Used or rebuilt
- 8407.10.0090 — Other
- 8407.21.0040 — Less than 22.38 kW
- 8407.21.0080 — Other
- 8407.29.0010 — Inboard engines with outboard drive
- 8407.29.0020 — Less than 746 W
- 8407.29.0030 — 746 W or greater, but not exceeding 18.65 kW
- 8407.29.0040 — Exceeding 18.65 kW
- 8407.31.0040 — Less than 746 W
- 8407.31.0080 — Other
- 8407.32.1000 — To be installed in tractors suitable for agricultural use
- 8407.32.2040 — Used or rebuilt
- 8407.32.2080 — Other
- 8407.32.9040 — Not exceeding 18.65 kW
- 8407.32.9080 — Exceeding 18.65 kW
- 8407.33.1030 — Not exceeding 37.3 kW
- 8407.33.1060 — Air-cooled
- 8407.33.1090 — Other
- 8407.33.3040 — Used or rebuilt
- 8407.33.3080 — Other
- 8407.33.6040 — Used or rebuilt
- 8407.33.6080 — Other
- 8407.33.9040 — Not exceeding 18.65 kW
- 8407.33.9080 — Exceeding 18.65 kW
- 8407.34.0530 — Not exceeding 37.3 kW
- 8407.34.0560 — Air-cooled
- 8407.34.0590 — Other
- 8407.34.1400 — Used or rebuilt
- 8407.34.1800 — Other
- 8407.34.2500 — Other
- 8407.34.3530 — Not exceeding 37.3 kW
- 8407.34.3560 — Air-cooled
- 8407.34.3590 — Other
- 8407.34.4400 — Used or rebuilt
- 8407.34.4800 — Other
- 8407.34.5500 — Other
- 8407.90.1010 — Less than 4,476 W
- 8407.90.1020 — Other
- 8407.90.1060 — Air-cooled
- 8407.90.1080 — Other
- 8407.90.9010 — Gas (natural or liquid propane (LP)) engines
- 8407.90.9020 — Less than 746 W
- 8407.90.9040 — 746 W or greater but less than 4,476 W
- 8407.90.9060 — 4,476 W or greater but not exceeding 18.65 kW
- 8407.90.9080 — Exceeding 18.65 kW
- 8408.10.0005 — Not exceeding 111.9 kW
- 8408.10.0015 — Exceeding 111.9 kW but not exceeding 149.2 kW
- 8408.10.0020 — Exceeding 149.2 kW but not exceeding 223.8 kW
- 8408.10.0030 — Exceeding 223.8 kW but not exceeding 373 kW
- 8408.10.0040 — Exceeding 373 kW but not exceeding 746 kW
- 8408.10.0050 — Exceeding 746 kW
- 8408.20.1040 — Not exceeding 37.3 kW
- 8408.20.1080 — Exceeding 37.3 kW
- 8408.20.2000 — To be installed in vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
- 8408.20.9000 — Other
- 8408.90.1040 — Not exceeding 37.3 kW
- 8408.90.1080 — Exceeding 37.3 kW
- 8408.90.9010 — Not exceeding 149.2 kW
- 8408.90.9020 — Exceeding 149.2 kW but not exceeding 373 kW
- 8408.90.9030 — Exceeding 373 kW but not exceeding 746 kW
- 8408.90.9040 — Exceeding 746 kW but not exceeding 1,119 kW
- 8408.90.9050 — Exceeding 1,119 kW
- 8409.10.0040 — For use in civil aircraft
- 8409.10.0080 — Other
- 8409.91.1040 — For vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
- 8409.91.1060 — For marine propulsion engines
- 8409.91.1080 — Other
- 8409.91.3000 — Aluminum cylinder heads
- 8409.91.5010 — Connecting rods
- 8409.91.5081 — Steel forgings
- 8409.91.5085 — Other
- 8409.91.9210 — Connecting rods
- 8409.91.9290 — Other
- 8409.91.9910 — Connecting rods
- 8409.91.9990 — Other
- 8409.99.1040 — For vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29, or heading 8702, 8703 or 8704
- 8409.99.1060 — For marine propulsion engines
- 8409.99.1080 — Other
- 8409.99.9110 — Connecting rods
- 8409.99.9190 — Other
- 8409.99.9210 — Connecting rods
- 8409.99.9290 — Other
- 8409.99.9910 — Connecting rods
- 8409.99.9990 — Other
- 8410.11.0000 — Of a power not exceeding 1,000 kW
- 8410.12.0000 — Of a power exceeding 1,000 kW but not exceeding 10,000 kW
- 8410.13.0000 — Of a power exceeding 10,000 kW
- 8410.90.0000 — Parts, including regulators
- 8411.11.4000 — Aircraft turbines
- 8411.11.8000 — Other
- 8411.12.4000 — Aircraft turbines
- 8411.12.8000 — Other
- 8411.21.4000 — Aircraft turbines
- 8411.21.8000 — Other
- 8411.22.4000 — Aircraft turbines
- 8411.22.8000 — Other
- 8411.81.4000 — Aircraft turbines
- 8411.81.8010 — Industrial turbines of a kind described in statistical note 1 of this chapter
- 8411.81.8090 — Other
- 8411.82.4000 — Aircraft turbines
- 8411.82.8010 — Industrial turbines of a kind described in statistical note 1 to this chapter
- 8411.82.8090 — Other
- 8411.91.1040 — Parts of nonaircraft turbines
- 8411.91.1060 — For use in civil aircraft
- 8411.91.1090 — Other
- 8411.91.9040 — Parts of nonaircraft turbines
- 8411.91.9081 — Steel forgings
- 8411.91.9085 — Other
- 8411.99.1010 — Parts of nonaircraft gas turbines
- 8411.99.1040 — For use in civil aircraft
- 8411.99.1080 — Other
- 8411.99.9030 — Rotors or spindles and rotor or spindle assemblies
- 8411.99.9081 — Steel forgings
- 8411.99.9085 — Other
- 8411.99.9090 — Parts of aircraft gas turbines
- 8412.10.0010 — Missile and rocket engines
- 8412.10.0090 — Other
- 8412.21.0015 — Tie-rod type
- 8412.21.0030 — Weld fused type
- 8412.21.0045 — Telescoping
- 8412.21.0060 — Rodless
- 8412.21.0075 — Other
- 8412.29.4000 — Hydrojet engines for marine propulsion
- 8412.29.8015 — Gear type
- 8412.29.8030 — Radial piston type
- 8412.29.8045 — Axial piston type
- 8412.29.8060 — Other
- 8412.29.8075 — Other
- 8412.31.0040 — Tie-rod type
- 8412.31.0080 — Other
- 8412.39.0040 — Unlimited rotary acting
- 8412.39.0080 — Other
- 8412.80.1000 — Spring-operated and weight-operated motors
- 8412.80.9000 — Other
- 8412.90.1000 — Of hydrojet engines for marine propulsion
- 8412.90.9005 — Of linear acting engines and motors
- 8412.90.9015 — Other
- 8412.90.9025 — Of linear acting engines and motors
- 8412.90.9035 — Other
- 8412.90.9050 — Of reaction engines other than turbojets
- 8412.90.9070 — Wind turbine blades, imported in accordance with statistical note 2 of this chapter
- 8412.90.9075 — Wind turbine hubs
- 8412.90.9085 — Other
- 8413.11.0000 — Pumps for dispensing fuel or lubricants, of the type used in filling-stations or in garages
- 8413.19.0000 — Other
- 8413.20.0000 — Hand pumps, other than those of subheading 8413.11 or 8413.19
- 8413.30.1000 — Fuel-injection pumps for compression-ignition engines
- 8413.30.9030 — Fuel pumps
- 8413.30.9060 — Lubricating pumps
- 8413.30.9090 — Other
- 8413.40.0000 — Concrete pumps
- 8413.50.0010 — Oil well and oil field pumps
- 8413.50.0050 — Diaphragm pumps
- 8413.50.0070 — Radial piston type
- 8413.50.0080 — Other
- 8413.50.0090 — Other
- 8413.60.0020 — Vane type
- 8413.60.0030 — Gear type
- 8413.60.0040 — Other
- 8413.60.0050 — Oil well and oil field pumps
- 8413.60.0070 — Roller pumps
- 8413.60.0090 — Other
- 8413.70.1000 — Stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard
- 8413.70.2004 — Submersible pumps
- 8413.70.2005 — With discharge outlet under 5.08 cm in diameter
- 8413.70.2015 — With discharge outlet 5.08 cm or over in diameter
- 8413.70.2022 — With discharge outlet under 7.6 cm in diameter
- 8413.70.2025 — With discharge outlet 7.6 cm or over in diameter
- 8413.70.2030 — Single-stage, double-suction
- 8413.70.2040 — Multi-stage, single- or double-suction
- 8413.70.2090 — Other
- 8413.81.0020 — Turbine pumps
- 8413.81.0030 — Household water systems, self-contained; and windmill pumps
- 8413.81.0040 — Other
- 8413.82.0000 — Liquid elevators
- 8413.91.1000 — Of fuel-injection pumps for compression-ignition engines
- 8413.91.2000 — Of stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard
- 8413.91.9010 — Of subheading 8413.30.90
- 8413.91.9055 — Fluid end blocks
- 8413.91.9060 — Other
- 8413.91.9065 — Sucker rods of a kind described in statistical note 3 to this chapter
- 8413.91.9085 — Other
- 8413.91.9096 — Other
- 8413.92.0000 — Of liquid elevators
- 8414.10.0000 — Vacuum pumps
- 8414.20.0000 — Hand- or foot-operated air pumps
- 8414.30.4000 — Not exceeding 1/4 horsepower
- 8414.30.8010 — Not exceeding 200 horsepower
- 8414.30.8020 — Exceeding 200 horsepower
- 8414.30.8030 — For motor vehicles
- 8414.30.8050 — Exceeding 1/4 horsepower but not exceeding 1 horsepower
- 8414.30.8060 — Exceeding 1 horsepower but not exceeding 3 horsepower
- 8414.30.8070 — Exceeding 3 horsepower but not exceeding 10 horsepower
- 8414.30.8080 — Exceeding 10 horsepower
- 8414.30.8090 — For ammonia
- 8414.40.0000 — Air compressors mounted on a wheeled chassis for towing
- 8414.51.3000 — Ceiling fans for permanent installation
- 8414.51.9060 — For permanent installation
- 8414.51.9090 — Other
- 8414.59.1000 — Blowers for pipe organs
- 8414.59.1500 — Fans of a kind used solely or principally for cooling microprocessors, telecommunications apparatus, automatic data processing machines or units of automatic data processing machines
- 8414.59.3000 — Turbochargers and superchargers
- 8414.59.6540 — Suitable for use with motor vehicles
- 8414.59.6560 — Centrifugal
- 8414.59.6590 — Axial
- 8414.59.6595 — Other
- 8414.60.0000 — Hoods having a maximum horizontal side not exceeding 120 cm
- 8414.70.0000 — Gas-tight biological safety cabinets
- 8414.80.0500 — Turbochargers and superchargers
- 8414.80.1605 — Not exceeding 746 W
- 8414.80.1615 — Exceeding 746 W but not exceeding 4.48 kW
- 8414.80.1625 — Exceeding 4.48 kW but not exceeding 8.21 kW
- 8414.80.1635 — Exceeding 8.21 kW but not exceeding 11.19 kW
- 8414.80.1640 — Exceeding 11.19 kW but not exceeding 19.4 kW
- 8414.80.1645 — Exceeding 19.4 kW but not exceeding 74.6 kW
- 8414.80.1655 — Exceeding 74.6 kW
- 8414.80.1660 — Not exceeding 11.19 kW
- 8414.80.1665 — Exceeding 11.19 kW but under 22.38 kW
- 8414.80.1670 — 22.38 kW and over but not exceeding 74.6 kW
- 8414.80.1675 — Exceeding 74.6 kW
- 8414.80.1680 — Other
- 8414.80.1685 — Under 0.57 cubic meters per minute
- 8414.80.1690 — Other
- 8414.80.2005 — Refrigerant recovery units
- 8414.80.2015 — Centrifugal and axial
- 8414.80.2055 — Not exceeding 186.5 kW
- 8414.80.2065 — Exceeding 186.5 kW but not exceeding 746 kW
- 8414.80.2075 — Exceeding 746 kW
- 8414.80.9000 — Other
- 8414.90.1040 — Of fans of subheading 8414.51
- 8414.90.1080 — Other
- 8414.90.3000 — Stators and rotors of goods of subheading 8414.30
- 8414.90.4120 — Compressor housings
- 8414.90.4140 — Other
- 8414.90.4145 — Compressor housings
- 8414.90.4155 — Other
- 8414.90.4165 — Compressor housings
- 8414.90.4180 — Impeller covers and hubs
- 8414.90.4190 — Other
- 8414.90.9140 — Of vacuum pumps
- 8414.90.9180 — Other
- 8415.10.3040 — Less than 2.93 kW per hour
- 8415.10.3060 — 2.93 kW per hour or greater but less than 4.98 kW per hour
- 8415.10.3080 — 4.98 kW per hour or greater
- 8415.10.6000 — Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps)
- 8415.10.9000 — Other
- 8415.20.0000 — Of a kind used for persons, in motor vehicles
- 8415.81.0110 — Not exceeding 17.58 kW per hour
- 8415.81.0120 — Exceeding 17.58 kW per hour
- 8415.81.0130 — Other
- 8415.82.0105 — Not exceeding 17.58 kW per hour
- 8415.82.0110 — Exceeding 17.58 kW per hour
- 8415.82.0115 — Not exceeding 17.58 kW per hour
- 8415.82.0120 — Exceeding 17.58 kW per hour
- 8415.82.0130 — Room fan coil units
- 8415.82.0135 — Central station air handlers
- 8415.82.0140 — Other
- 8415.82.0155 — With a rated water removal capacity of less than 35 liters over a 24 hour period
- 8415.82.0160 — Other
- 8415.82.0170 — Other air conditioning machines incorporating a refrigerating unit
- 8415.83.0050 — Not exceeding 17.58 kW per hour
- 8415.83.0060 — Exceeding 17.58 kW per hour
- 8415.83.0070 — Other
- 8415.83.0090 — Other air conditioning machines not incorporating a refrigerating unit
- 8415.90.4000 — Chassis, chassis bases and outer cabinets
- 8415.90.8010 — Of copper or copper alloys
- 8415.90.8020 — Other
- 8415.90.8045 — Of automotive air conditioners
- 8415.90.8050 — Of copper or copper alloys
- 8415.90.8070 — Other
- 8415.90.8085 — Other
- 8416.10.0000 — Furnace burners for liquid fuel
- 8416.20.0040 — Gas burners
- 8416.20.0080 — Other
- 8416.30.0000 — Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances
- 8416.90.0000 — Parts
- 8417.10.0000 — Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals
- 8417.20.0000 — Bakery ovens, including biscuit ovens
- 8417.80.0000 — Other, except parts
- 8417.90.0000 — Parts
- 8418.10.0010 — Having a refrigerated volume of under 184 liters
- 8418.10.0020 — Having a refrigerated volume of 184 liters and over but under 269 liters
- 8418.10.0030 — Having a refrigerated volume of 269 liters and over but under 382 liters
- 8418.10.0045 — Having an external depth (excluding door handles) not exceeding 73 centimeters
- 8418.10.0055 — Other
- 8418.10.0065 — Other
- 8418.10.0080 — Refrigerators with a top freezer compartment
- 8418.10.0085 — Other
- 8418.10.0090 — Other
- 8418.21.0010 — Having a refrigerated volume of under 184 liters
- 8418.21.0020 — Having a refrigerated volume of 184 liters and over but under 269 liters
- 8418.21.0030 — Having a refrigerated volume of 269 liters and over but under 382 liters
- 8418.21.0090 — Having a refrigerated volume of 382 liters and over
- 8418.29.1000 — Absorption type, electrical
- 8418.29.2000 — Other
- 8418.30.0000 — Freezers of the chest type, not exceeding 800 liters capacity
- 8418.40.0000 — Freezers of the upright type, not exceeding 900 liters capacity
- 8418.50.0040 — Freezing
- 8418.50.0080 — Other
- 8418.61.0100 — Heat pumps other than air conditioning machines of heading 8415
- 8418.69.0110 — Icemaking machines
- 8418.69.0120 — Drinking water coolers, self-contained
- 8418.69.0130 — Soda fountain and beer dispensing equipment
- 8418.69.0140 — Centrifugal liquid chilling refrigerating units
- 8418.69.0150 — Reciprocating liquid chilling refrigerating units
- 8418.69.0160 — Absorption liquid chilling units
- 8418.69.0180 — Other refrigerating or freezing equipment
- 8418.91.0000 — Furniture designed to receive refrigerating or freezing equipment
- 8418.99.4000 — Door assemblies incorporating more than one of the following: inner panel; outer panel; insulation; hinges; handles
- 8418.99.8005 — Not exceeding 746 W
- 8418.99.8010 — Exceeding 746 W but not exceeding 2.2 kW
- 8418.99.8015 — Exceeding 2.2 kW but not exceeding 7.5 kW
- 8418.99.8020 — Exceeding 7.5 kW but not exceeding 22.3 kW
- 8418.99.8025 — Exceeding 22.3 kW
- 8418.99.8050 — Parts of combined refrigerator-freezers fitted with separate external doors and parts of household type refrigerators
- 8418.99.8060 — Other
- 8419.11.0000 — Instantaneous gas water heaters
- 8419.12.0000 — Solar water heaters
- 8419.19.0120 — Instantaneous water heaters
- 8419.19.0160 — Other
- 8419.20.0010 — Medical or surgical sterilizers
- 8419.20.0020 — Laboratory sterilizers
- 8419.33.1000 — For agricultural products
- 8419.33.5000 — Other
- 8419.34.0000 — Other, for agricultural products
- 8419.35.1000 — For wood
- 8419.35.5000 — Other
- 8419.39.0270 — For foods and beverages
- 8419.39.0280 — Other
- 8419.40.0040 — For food and beverages
- 8419.40.0080 — Other
- 8419.50.1000 — Brazed aluminum plate-fin heat exchangers
- 8419.50.5000 — Other
- 8419.60.1000 — Machinery containing brazed aluminum plate-fin heat exchangers
- 8419.60.5000 — Other
- 8419.81.5040 — For use in civil aircraft
- 8419.81.5080 — Other
- 8419.81.9040 — Of a type used in restaurants, hotels or similar locations
- 8419.81.9080 — Other
- 8419.89.1000 — For making paper pulp, paper or paperboard
- 8419.89.6000 — Molten-salt-cooled acrylic acid reactors
- 8419.89.9520 — For food and beverages
- 8419.89.9540 — Other
- 8419.89.9560 — For food and beverages
- 8419.89.9580 — For rubber and plastics
- 8419.89.9585 — For other materials
- 8419.90.1000 — Of instantaneous or storage water heaters
- 8419.90.2000 — Of machinery and plant for making paper pulp, paper or paperboard
- 8419.90.3000 — Of heat exchange units
- 8419.90.5040 — Of medical, surgical or laboratory sterilizers
- 8419.90.5080 — Other
- 8419.90.8500 — Of electromechanical tools for working in the hand with self-contained electric motor
- 8419.90.9520 — Of an apparatus of a type used in restaurants, hotels or similar locations
- 8419.90.9580 — Other
- 8420.10.1000 — Textile calendering or rolling machines
- 8420.10.2000 — Calendering or similar rolling machines for making paper pulp, paper or paperboard
- 8420.10.9040 — Calendering or other rolling machines for rubber and plastics
- 8420.10.9080 — Other
- 8420.91.1000 — For textile calendering or rolling machines
- 8420.91.2000 — For calendering or other rolling machines for machines for making paper pulp, paper or paperboard
- 8420.91.9000 — Other
- 8420.99.1000 — Of machines for processing textiles
- 8420.99.2000 — Of machines for making paper pulp, paper or paperboard
- 8420.99.9000 — Other
- 8421.11.0000 — Cream separators
- 8421.12.0000 — Clothes-dryers
- 8421.19.0000 — Other
- 8421.21.0000 — For filtering or purifying water
- 8421.22.0000 — For filtering or purifying beverages other than water
- 8421.23.0000 — Oil or fuel filters for internal combustion engines
- 8421.29.0005 — Refrigerant recovery and recycling units
- 8421.29.0015 — Oil-separation equipment
- 8421.29.0040 — Hydraulic fluid power filters, rated at 1,000 kPa or greater
- 8421.29.0065 — Other
- 8421.31.0000 — Intake air filters for internal combustion engines
- 8421.32.0000 — Catalytic converters or particulate filters, whether or not combined, for purifying or filtering exhaust gases from internal combustion engines
- 8421.39.0105 — For machine tools of headings 8456 through 8465, inclusive
- 8421.39.0115 — Other
- 8421.39.0120 — Electrostatic precipitators
- 8421.39.0130 — Other
- 8421.39.0140 — Gas separation equipment
- 8421.39.0160 — Pneumatic fluid power filters, rated at 550 kPa or greater
- 8421.39.0190 — Other
- 8421.91.2000 — Drying chambers for the clothes-dryers of subheading 8421.12 and other parts of clothes-dryers incorporating drying chambers
- 8421.91.4000 — Furniture designed to receive the clothes-dryers of subheading 8421.12
- 8421.91.6000 — Other
- 8421.99.0140 — Parts of machinery and apparatus for filtering or purifying water
- 8421.99.0180 — Other
- 8422.11.0000 — Of the household type
- 8422.19.0000 — Other
- 8422.20.0000 — Machinery for cleaning or drying bottles or other containers
- 8422.30.1100 — Can-sealing machines
- 8422.30.9110 — Machines for aerating beverages
- 8422.30.9120 — Labeling machines
- 8422.30.9130 — Vacuum or gas packaging
- 8422.30.9140 — Other
- 8422.30.9150 — Vacuum or gas packaging
- 8422.30.9160 — Other
- 8422.30.9170 — Other
- 8422.30.9180 — Machines for opening, filling and closing bags
- 8422.30.9185 — Machines for forming, filling and sealing bags/pouches
- 8422.30.9186 — Machines for opening, filling and closing boxes
- 8422.30.9187 — Machines for skin and blister packaging
- 8422.30.9191 — Other
- 8422.40.1110 — Machines for wrapping candy
- 8422.40.1190 — Other
- 8422.40.9140 — Strapping machines
- 8422.40.9150 — Machines for case and tray forming, packing, unpacking, closing and sealing
- 8422.40.9160 — Machines for shrink film and heat sealing
- 8422.40.9170 — Machines for wrapping
- 8422.40.9181 — Other
- 8422.90.0200 — Water containment chambers for the dishwashing machines of subheading 8422.11 and other parts of dishwashing machines of the household type incorporating water containment chambers
- 8422.90.0400 — Door assemblies for the dishwashing machines of subheading 8422.11
- 8422.90.0640 — Of the household type
- 8422.90.0680 — Other
- 8422.90.1100 — Of can-sealing machines
- 8422.90.2100 — Of machines for packaging pipe tobacco, wrapping candy or wrapping cigarette packages, and of combination candy cutting and wrapping machines
- 8422.90.9120 — Of machinery for cleaning or drying bottles or other containers
- 8422.90.9130 — Of strapping machines
- 8422.90.9160 — Of other wrapping and packaging machines
- 8422.90.9195 — Other
- 8423.10.0010 — Digital electronic type
- 8423.10.0030 — Of a kind suitable for carrying on the person
- 8423.10.0060 — Other
- 8423.20.1000 — Using electronic means for gauging weights
- 8423.20.9000 — Other
- 8423.30.0000 — Constant-weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales
- 8423.81.0010 — Counting scales
- 8423.81.0020 — Retail scales, non-computing
- 8423.81.0030 — Retail scales, computing
- 8423.81.0040 — Other
- 8423.81.0050 — Other
- 8423.82.0010 — Digital electronic type
- 8423.82.0050 — Other
- 8423.89.1000 — Using electronic means for gauging
- 8423.89.9000 — Other
- 8423.90.1000 — Parts of weighing machinery using electronic means for gauging weight, excluding parts of machines for weighing motor vehicles
- 8423.90.9000 — Other
- 8424.10.0000 — Fire extinguishers, whether or not charged
- 8424.20.1000 — Simple piston pump sprays and powder bellows
- 8424.20.9000 — Other
- 8424.30.1000 — Sand blasting machines
- 8424.30.9000 — Other
- 8424.41.1000 — Sprayers (except sprayers, self-contained, having a capacity not over 20 liters)
- 8424.41.9000 — Other
- 8424.49.0000 — Other
- 8424.82.0010 — Self-propelled, center pivot
- 8424.82.0020 — Other
- 8424.82.0090 — Other
- 8424.89.1000 — Mechanical appliances for projecting, dispersing or spraying, of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
- 8424.89.9000 — Other
- 8424.90.0500 — Of fire extinguishers
- 8424.90.1000 — Of simple piston pump sprays and powder bellows
- 8424.90.2000 — Of sand blasting machines
- 8424.90.9040 — Of steam and similar jet projecting machines
- 8424.90.9080 — Other
- 8425.11.0000 — Powered by electric motor
- 8425.19.0000 — Other
- 8425.31.0100 — Powered by electric motor
- 8425.39.0100 — Other
- 8425.41.0000 — Built-in jacking systems of a type used in garages
- 8425.42.0000 — Other jacks and hoists, hydraulic
- 8425.49.0000 — Other
- 8426.11.0000 — Overhead traveling cranes on fixed support
- 8426.12.0000 — Mobile lifting frames on tires and straddle carriers
- 8426.19.0000 — Other
- 8426.20.0000 — Tower cranes
- 8426.30.0000 — Portal or pedestal jib cranes
- 8426.41.0005 — Works trucks fitted with a crane
- 8426.41.0010 — Cable operated
- 8426.41.0090 — Other
- 8426.49.0010 — Cable operated
- 8426.49.0090 — Other
- 8426.91.0000 — Designed for mounting on road vehicles
- 8426.99.0000 — Other
- 8427.10.4000 — Rider-type, counterbalanced fork-lift trucks
- 8427.10.8020 — Aerial work platforms of a kind described in statistical note 4 to this chapter
- 8427.10.8030 — Other
- 8427.10.8040 — Aerial work platforms of a kind described in statistical note 4 to this chapter
- 8427.10.8050 — Other
- 8427.10.8070 — Aerial work platforms of a kind described in statistical note 4 to this chapter
- 8427.10.8095 — Other
- 8427.20.4000 — Rider-type, counterbalanced fork-lift trucks
- 8427.20.8020 — Aerial work platforms of a kind described in statistical note 4 to this chapter
- 8427.20.8090 — Other
- 8427.90.0020 — Aerial work platforms of a kind described in statistical note 4 to this chapter
- 8427.90.0090 — Other
- 8428.10.0000 — Passenger or freight elevators other than continuous action; skip hoists
- 8428.20.0010 — Conveyors
- 8428.20.0050 — Elevators
- 8428.31.0000 — Specially designed for underground use
- 8428.32.0000 — Other, bucket type
- 8428.33.0000 — Other, belt type
- 8428.39.0000 — Other
- 8428.40.0000 — Escalators and moving walkways
- 8428.60.0000 — Teleferics, chair lifts, ski draglines; traction mechanisms for funiculars
- 8428.70.0000 — Industrial robots
- 8428.90.0310 — Woodland log handling equipment (other than skidders)
- 8428.90.0390 — Other
- 8429.11.0010 — New
- 8429.11.0090 — Used or rebuilt
- 8429.19.0010 — New
- 8429.19.0090 — Used or rebuilt
- 8429.20.0000 — Graders and levelers
- 8429.30.0020 — Not exceeding 13.7 m3
- 8429.30.0040 — Exceeding 13.7 m3
- 8429.30.0060 — Used or rebuilt
- 8429.40.0020 — Vibratory
- 8429.40.0040 — Other
- 8429.40.0060 — Used or rebuilt
- 8429.51.1005 — 2 wheel drive
- 8429.51.1015 — Under 1.5 m3
- 8429.51.1025 — At least 1.5 m3 but under 2.2 m3
- 8429.51.1030 — At least 2.2 m3 but under 2.9 m3
- 8429.51.1035 — At least 2.9 m3 but under 3.8 m3
- 8429.51.1040 — At least 3.8 m3 but under 5.2 m3
- 8429.51.1045 — At least 5.2 m3 but under 7.6 m3
- 8429.51.1050 — At least 7.6 m3 but under 11.4 m3
- 8429.51.1055 — 11.4 m3 and over
- 8429.51.1060 — Other
- 8429.51.1065 — Used or rebuilt
- 8429.51.5010 — Less than 44.7 kW
- 8429.51.5020 — At least 44.7 kW but under 67.1 kW
- 8429.51.5030 — At least 67.1 kW but under 93.2 kW
- 8429.51.5040 — At least 93.2 kW but under 119.3 kW
- 8429.51.5050 — 119.3 kW and over
- 8429.51.5060 — Used or rebuilt
- 8429.52.1010 — Hydraulic
- 8429.52.1020 — Other
- 8429.52.1030 — Hydraulic
- 8429.52.1040 — Other
- 8429.52.1050 — Used or rebuilt
- 8429.52.5010 — New
- 8429.52.5090 — Used or rebuilt
- 8429.59.1030 — Backhoes
- 8429.59.1060 — Other
- 8429.59.1090 — Used or rebuilt
- 8429.59.5020 — Ladder type
- 8429.59.5040 — Other
- 8429.59.5060 — Other
- 8429.59.5080 — Used or rebuilt
- 8430.10.0000 — Pile-drivers and pile-extractors
- 8430.20.0030 — Attachment type
- 8430.20.0060 — Other
- 8430.20.0090 — Other
- 8430.31.0040 — Rock breaking machines
- 8430.31.0080 — Other
- 8430.39.0040 — Rock breaking machines
- 8430.39.0080 — Other
- 8430.41.0000 — Self-propelled
- 8430.49.4000 — Offshore oil and natural gas drilling and production platforms
- 8430.49.8010 — Rotary
- 8430.49.8020 — Other
- 8430.49.8030 — Rotary
- 8430.49.8040 — Other
- 8430.49.8050 — Other
- 8430.50.1000 — Peat excavators
- 8430.50.5000 — Other
- 8430.61.0000 — Tamping or compacting machinery
- 8430.69.0100 — Other
- 8431.10.0010 — Of machinery of subheading 8425.11 or 8425.19
- 8431.10.0090 — Other
- 8431.20.0000 — Of machinery of heading 8427
- 8431.31.0020 — Of skip hoists
- 8431.31.0040 — Of escalators
- 8431.31.0060 — Other
- 8431.39.0010 — Of elevators and conveyors
- 8431.39.0050 — Of oil and gas field machinery
- 8431.39.0070 — Of the woodland log handling equipment of statistical reporting number 8428.90.0310
- 8431.39.0080 — Other
- 8431.41.0020 — Shovel attachments
- 8431.41.0040 — Clamshell (grappler) attachments
- 8431.41.0060 — Dragline buckets
- 8431.41.0080 — Other
- 8431.42.0000 — Bulldozer or angledozer blades
- 8431.43.4000 — Of offshore oil and natural gas drilling and production platforms
- 8431.43.8020 — Tool joints, whether or not forged
- 8431.43.8040 — Drill pipe fitted with tool joints
- 8431.43.8060 — Other
- 8431.43.8090 — Of other boring or sinking machinery
- 8431.49.1010 — Of machinery of subheadings 8426.11, 8426.19 and 8426.30
- 8431.49.1060 — Of mobile lifting frames, straddle carriers and works trucks fitted with a crane
- 8431.49.1070 — Of copper or copper alloys
- 8431.49.1080 — Other
- 8431.49.9005 — Backhoe attachments
- 8431.49.9010 — Front-end loader attachments
- 8431.49.9015 — Rippers and rooters
- 8431.49.9020 — Other
- 8431.49.9025 — Cast axle housings
- 8431.49.9032 — Of copper or copper alloys
- 8431.49.9034 — Other
- 8431.49.9035 — Cast axle housings
- 8431.49.9036 — Road wheels
- 8431.49.9038 — Wheel and tire assemblies
- 8431.49.9039 — Of copper or copper alloys
- 8431.49.9041 — Other
- 8431.49.9045 — Scraper bowls for scrapers of subheadings 8429.30 and 8430.69.01
- 8431.49.9050 — Track links
- 8431.49.9055 — Cast axle housings
- 8431.49.9081 — Steel forgings
- 8431.49.9084 — Road wheels
- 8431.49.9090 — Wheel and tire assemblies
- 8431.49.9092 — Of copper or copper alloys
- 8431.49.9094 — Other
- 8432.10.0020 — Moldboard plows except listers
- 8432.10.0040 — Disc plows
- 8432.10.0060 — Other
- 8432.21.0000 — Disc harrows
- 8432.29.0040 — Cultivators, tractor drawn or for tractor mounting
- 8432.29.0060 — Walk behind rotary tillers
- 8432.29.0080 — Other
- 8432.29.0090 — Other
- 8432.31.0010 — Planters and transplanters
- 8432.31.0090 — Seeders
- 8432.39.0010 — Planters and transplanters
- 8432.39.0090 — Seeders
- 8432.41.0000 — Manure spreaders
- 8432.42.0000 — Fertilizer distributors
- 8432.80.0010 — Tow behind spreaders, aerators, and de- thatchers
- 8432.80.0080 — Other
- 8432.90.0010 — Road wheels without tires
- 8432.90.0020 — Wheel and tire assemblies
- 8432.90.0040 — Of plows
- 8432.90.0050 — Of harrows, scarifiers, cultivators, weeders and hoes
- 8432.90.0060 — Of seeders, planters, transplanters, manure spreaders and fertilizer distributors
- 8432.90.0081 — Of other machinery
- 8433.11.0010 — Electric mowers, including battery operated
- 8433.11.0020 — Under 5.2 kW
- 8433.11.0030 — 5.2 kW and over but under 7.46 kW
- 8433.11.0040 — 7.46 kW and over
- 8433.11.0050 — Under 3.7 kW
- 8433.11.0060 — 3.7 kW and over
- 8433.19.0010 — Greens mowers
- 8433.19.0020 — Gang cutting units
- 8433.19.0030 — Other riding mowers
- 8433.19.0040 — Gasoline powered
- 8433.19.0050 — Other
- 8433.20.0020 — Rotary cutter type
- 8433.20.0040 — Other
- 8433.20.0060 — Other
- 8433.30.0000 — Other haymaking machinery
- 8433.40.0000 — Straw or fodder balers, including pick-up balers
- 8433.51.0010 — Self-propelled
- 8433.51.0090 — Other
- 8433.52.0000 — Other threshing machinery
- 8433.53.0000 — Root or tuber harvesting machines
- 8433.59.0010 — Field forage harvesters
- 8433.59.0090 — Other
- 8433.60.0010 — Machines for cleaning, sorting or grading eggs
- 8433.60.0090 — Other
- 8433.90.1010 — Wheel and tire assemblies
- 8433.90.1090 — Other
- 8433.90.5010 — Road wheels
- 8433.90.5025 — Of haying machines and balers
- 8433.90.5045 — Other
- 8433.90.5060 — Of machines for cleaning, sorting or grading eggs
- 8433.90.5080 — Of machines for cleaning, sorting or grading fruit or other agricultural produce
- 8434.10.0000 — Milking machines
- 8434.20.0000 — Dairy machinery
- 8434.90.0000 — Parts
- 8435.10.0000 — Machinery
- 8435.90.0000 — Parts
- 8436.10.0000 — Machinery for preparing animal feeds
- 8436.21.0000 — Poultry incubators and brooders
- 8436.29.0000 — Other
- 8436.80.0020 — Forestry machinery
- 8436.80.0040 — Barn and barnyard machines
- 8436.80.0060 — Machines for preparing crops for market or for use
- 8436.80.0070 — Bee-keeping machinery
- 8436.80.0090 — Other
- 8436.91.0040 — Of poultry incubators and brooders
- 8436.91.0080 — Other
- 8436.99.0020 — Of forestry machinery
- 8436.99.0030 — Of bee-keeping machinery
- 8436.99.0035 — Of machinery for preparing animal feeds
- 8436.99.0040 — Of barn or barnyard machines
- 8436.99.0070 — Of machines for preparing crops for market or for use
- 8436.99.0090 — Other
- 8437.10.0000 — Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables
- 8437.80.0010 — Flour mill and grain mill machines
- 8437.80.0090 — Other
- 8437.90.0010 — Of flour mill or grain mill machines
- 8437.90.0090 — Other
- 8438.10.0010 — Bakery machinery
- 8438.10.0090 — Other
- 8438.20.0000 — Machinery for the manufacture of confectionery, cocoa or chocolate
- 8438.30.0000 — Machinery for sugar manufacture
- 8438.40.0000 — Brewery machinery
- 8438.50.0010 — Meat- and poultry-packing plant machinery
- 8438.50.0090 — Other
- 8438.60.0000 — Machinery for the preparation of fruits, nuts or vegetables
- 8438.80.0000 — Other machinery
- 8438.90.1000 — Of machinery for sugar manufacture
- 8438.90.9015 — Of bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products
- 8438.90.9030 — Of machinery for the manufacture of confectionery, cocoa or chocolate
- 8438.90.9060 — Of machinery for the preparation of meat or poultry
- 8438.90.9090 — Other
- 8439.10.0010 — New
- 8439.10.0090 — Used or rebuilt
- 8439.20.0010 — New
- 8439.20.0090 — Used or rebuilt
- 8439.30.0000 — Machinery for finishing paper or paperboard
- 8439.91.1000 — Bed plates, roll bars and other stock-treating parts
- 8439.91.9000 — Other
- 8439.99.1000 — Of machinery for making paper or paperboard
- 8439.99.5000 — Of machinery for finishing paper or paperboard
- 8440.10.0000 — Machinery
- 8440.90.0000 — Parts
- 8441.10.0000 — Cutting machines
- 8441.20.0000 — Machines for making bags, sacks or envelopes
- 8441.30.0000 — Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by molding
- 8441.40.0000 — Machines for molding articles in paper pulp, paper or paperboard
- 8441.80.0000 — Other machinery
- 8441.90.0000 — Parts
- 8442.30.0110 — Phototypesetting and composing machines
- 8442.30.0150 — Other machinery, apparatus and equipment
- 8442.40.0000 — Parts of the foregoing machinery, apparatus or equipment
- 8442.50.1000 — Plates
- 8442.50.9000 — Other
- 8443.11.1000 — Double-width newspaper printing presses
- 8443.11.5000 — Other
- 8443.12.0000 — Offset printing machinery, sheet-fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state)
- 8443.13.0000 — Other offset printing machinery
- 8443.14.0000 — Letterpress printing machinery, reel fed, excluding flexographic printing
- 8443.15.0000 — Letterpress printing machinery, other than reel fed, excluding flexographic printing
- 8443.16.0000 — Flexographic printing machinery
- 8443.17.0000 — Gravure printing machinery
- 8443.19.2000 — Textile printing machinery
- 8443.19.3000 — Other
- 8443.31.0000 — Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network
- 8443.32.1010 — Capable of producing more than 20 pages per minute
- 8443.32.1020 — Other
- 8443.32.1030 — Light bar electronic type
- 8443.32.1040 — Ink jet
- 8443.32.1050 — Thermal transfer
- 8443.32.1060 — Ionographic
- 8443.32.1070 — Daisy wheel
- 8443.32.1080 — Dot matrix
- 8443.32.1090 — Other
- 8443.32.5000 — Other
- 8443.39.1000 — Operating by reproducing the original image directly onto the copy (direct process)
- 8443.39.2000 — Operating by reproducing the original image via an intermediate onto the copy (indirect process)
- 8443.39.3000 — Incorporating an optical system
- 8443.39.4000 — Of the contact type
- 8443.39.5000 — Thermocopying apparatus
- 8443.39.6000 — Other
- 8443.39.9000 — Other
- 8443.91.1000 — Machines for uses ancillary to printing
- 8443.91.2000 — Parts for textile printing machinery
- 8443.91.3000 — Other
- 8443.99.1000 — Accessory and auxiliary machines which are intended for attachment to an electrostatic photocopier and which do not operate independently of such photocopier
- 8443.99.2010 — Ink cartridges
- 8443.99.2050 — Other
- 8443.99.2510 — Ink cartridges
- 8443.99.2550 — Other
- 8443.99.3000 — Parts of facsimile machines specified in additional U.S. note 3 to this chapter
- 8443.99.3500 — Other
- 8443.99.4000 — Parts of photocopying apparatus of subheading 8443.39.20 specified in additional U.S. note 4 to this chapter
- 8443.99.4500 — Other
- 8443.99.5011 — Ink cartridges
- 8443.99.5015 — Other
- 8443.99.5050 — Other
- 8444.00.0010 — Texturing machines
- 8444.00.0090 — Other
- 8445.11.0000 — Carding machines
- 8445.12.0000 — Combing machines
- 8445.13.0000 — Drawing or roving machines
- 8445.19.0040 — Cotton gins
- 8445.19.0080 — Other
- 8445.20.0000 — Textile spinning machines
- 8445.30.0010 — Textile twisting machines
- 8445.30.0090 — Other
- 8445.40.0000 — Textile winding (including weft winding) or reeling machines
- 8445.90.0000 — Other
- 8446.10.0010 — Power looms
- 8446.10.0090 — Other
- 8446.21.1000 — For weaving fabrics of a width exceeding 4.9 m
- 8446.21.5000 — Other
- 8446.29.0000 — Other
- 8446.30.1010 — Rapier type
- 8446.30.1020 — Jet type
- 8446.30.1030 — Other
- 8446.30.5010 — Rapier type
- 8446.30.5020 — Jet type
- 8446.30.5030 — Other
- 8447.11.1000 — For knitting hosiery
- 8447.11.9010 — Open-top cylinder machines
- 8447.11.9020 — Cylinder and dial machines
- 8447.11.9090 — Other
- 8447.12.1000 — For knitting hosiery
- 8447.12.9010 — Open-top cylinder machines
- 8447.12.9020 — Cylinder and dial machines
- 8447.12.9090 — Other
- 8447.20.2000 — Power driven flat knitting machines over 50.8 cm in width
- 8447.20.3000 — Other
- 8447.20.4000 — Warp knitting machines
- 8447.20.6000 — Other
- 8447.90.1000 — Braiding and lace-braiding machines
- 8447.90.5000 — Embroidery machines
- 8447.90.9000 — Other
- 8448.11.0000 — Dobbies and Jacquards; card reducing, copying, punching or assembling machines for use therewith
- 8448.19.0000 — Other
- 8448.20.1000 — Of machines for extruding or drawing man-made textile filaments
- 8448.20.5010 — Of texturing machines
- 8448.20.5090 — Other
- 8448.31.0000 — Card clothing
- 8448.32.0010 — Of cotton gins
- 8448.32.0090 — Other
- 8448.33.0000 — Spindles, spindle flyers, spinning rings and ring travellers
- 8448.39.1000 — Parts of spinning, doubling or twisting machines
- 8448.39.5000 — Parts of winding or reeling machines
- 8448.39.9000 — Other
- 8448.42.0000 — Reeds for looms, healds and heald-frames
- 8448.49.1000 — Shuttles
- 8448.49.2000 — Other
- 8448.51.1000 — Latch needles
- 8448.51.2000 — Spring-beard needles
- 8448.51.3000 — Other
- 8448.51.5000 — Other
- 8448.59.1000 — Parts of knitting machines
- 8448.59.5000 — Other
- 8449.00.1000 — Finishing machinery and parts thereof
- 8449.00.5000 — Other
- 8450.11.0010 — Coin operated
- 8450.11.0040 — Top Loading
- 8450.11.0080 — Other
- 8450.12.0000 — Other machines with built-in centrifugal dryer
- 8450.19.0000 — Other
- 8450.20.0010 — Coin operated
- 8450.20.0040 — Top Loading
- 8450.20.0080 — Other
- 8450.90.2000 — Tubs and tub assemblies
- 8450.90.4000 — Furniture designed to receive the machines of subheadings 8450.11 through 8450.20, inclusive
- 8450.90.6000 — Other
- 8451.10.0000 — Dry-cleaning machines
- 8451.21.0010 — Coin operated
- 8451.21.0090 — Other
- 8451.29.0010 — For drying made up articles
- 8451.29.0090 — Other
- 8451.30.0000 — Ironing machines and presses (including fusing presses)
- 8451.40.0000 — Washing, bleaching or dyeing machines
- 8451.50.0000 — Machines for reeling, unreeling, folding, cutting or pinking textile fabrics
- 8451.80.0000 — Other machinery
- 8451.90.3000 — Drying chambers for the drying machines of subheading 8451.21 or 8451.29, and other parts of drying machines incorporating drying chambers
- 8451.90.6000 — Furniture designed to receive the drying machines of subheading 8451.21 or 8451.29
- 8451.90.9010 — Of machines for washing, dry-cleaning, ironing, pressing or drying made up textile articles or of other household or laundry type machines
- 8451.90.9020 — Of machines for bleaching, dyeing, washing or cleaning
- 8451.90.9090 — Other
- 8452.10.0010 — Valued not over $20 each
- 8452.10.0090 — Other
- 8452.21.1000 — Specially designed to join footwear soles to uppers
- 8452.21.9000 — Other
- 8452.29.1000 — Specially designed to join footwear soles to uppers
- 8452.29.9000 — Other
- 8452.30.0000 — Sewing machine needles
- 8452.90.1000 — Furniture, bases and covers for sewing machines, and parts thereof
- 8452.90.2010 — Of household machines
- 8452.90.2090 — Other
- 8453.10.0000 — Machinery for preparing, tanning or working hides, skins or leather
- 8453.20.0000 — Machinery for making or repairing footwear
- 8453.80.0000 — Other machinery
- 8453.90.1000 — Of machinery for making or repairing footwear
- 8453.90.5000 — Other
- 8454.10.0000 — Converters
- 8454.20.0010 — For steel ingots
- 8454.20.0060 — Other
- 8454.20.0080 — Ladles
- 8454.30.0010 — Die casting machines
- 8454.30.0090 — Other
- 8454.90.0030 — Of die casting machines
- 8454.90.0060 — Other
- 8454.90.0070 — Of ingot molds
- 8454.90.0080 — Other
- 8455.10.0000 — Tube mills
- 8455.21.0000 — Hot or combination hot and cold
- 8455.22.0000 — Cold
- 8455.30.0005 — Not exceeding 2,268 kg
- 8455.30.0015 — Exceeding 2,268 kg but not exceeding 6,803.9 kg
- 8455.30.0025 — Exceeding 6,803.9 kg
- 8455.30.0035 — Not exceeding 2,268 kg
- 8455.30.0045 — Exceeding 2,268 kg but not exceeding 6,803.9 kg
- 8455.30.0055 — Exceeding 6,803.9 kg
- 8455.30.0065 — Not exceeding 2,268 kg
- 8455.30.0075 — Exceeding 2,268 kg but not exceeding 6,803.9 kg
- 8455.30.0085 — Exceeding 6,803.9 kg
- 8455.90.4000 — Castings or weldments, individually weighing less than 90 tons, for the machines of heading 8455
- 8455.90.8000 — Other
- 8456.11.1010 — Numerically controlled
- 8456.11.1050 — Other
- 8456.11.7000 — Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing units
- 8456.11.9000 — Other
- 8456.12.1010 — Numerically controlled
- 8456.12.1050 — Other
- 8456.12.7000 — Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing
- 8456.12.9000 — Other
- 8456.20.1010 — Numerically controlled
- 8456.20.1050 — Other
- 8456.20.5000 — Other
- 8456.30.1020 — Traveling wire (wire-cut) type
- 8456.30.1050 — Numerically controlled
- 8456.30.1070 — Other
- 8456.30.5000 — Other
- 8456.40.1010 — Numerically controlled
- 8456.40.1090 — Other
- 8456.40.9000 — Other
- 8456.50.0000 — Water-jet cutting machines
- 8456.90.3100 — For working metal
- 8456.90.7100 — Other
- 8457.10.0005 — Used or rebuilt
- 8457.10.0015 — Not over 660 mm
- 8457.10.0025 — Over 660 mm
- 8457.10.0055 — Not over 685 mm
- 8457.10.0060 — Over 685 mm but not over 1,016 mm
- 8457.10.0065 — Over 1,016 mm
- 8457.10.0070 — Other
- 8457.10.0075 — Other
- 8457.20.0010 — Numerically controlled
- 8457.20.0090 — Other
- 8457.30.0010 — Numerically controlled
- 8457.30.0090 — Other
- 8458.11.0005 — Used or rebuilt
- 8458.11.0010 — Multiple spindle
- 8458.11.0030 — With a power rating of less than 18.65 kW
- 8458.11.0050 — With a power rating of 18.65 kW or greater but not exceeding 37.3 kW
- 8458.11.0090 — With a power rating exceeding 37.3 kW
- 8458.19.0010 — Used or rebuilt
- 8458.19.0020 — Other, valued under $3,025 each
- 8458.19.0030 — Engine or toolroom lathes
- 8458.19.0050 — Single spindle
- 8458.19.0070 — Multiple spindle
- 8458.19.0090 — Other
- 8458.91.1040 — Used or rebuilt
- 8458.91.1060 — Multiple spindle
- 8458.91.1080 — Other
- 8458.91.5040 — Used or rebuilt
- 8458.91.5050 — Multiple spindle
- 8458.91.5070 — Other
- 8458.99.1010 — Used or rebuilt
- 8458.99.1050 — Other
- 8458.99.5030 — Used or rebuilt
- 8458.99.5060 — Other, valued under $3,025 each
- 8458.99.5090 — Other
- 8459.10.0000 — Way-type unit head machines
- 8459.21.0040 — Used or rebuilt
- 8459.21.0080 — Other
- 8459.29.0010 — Used or rebuilt
- 8459.29.0020 — Other, valued under $3,025 each
- 8459.29.0040 — Multiple spindle
- 8459.29.0050 — Radial
- 8459.29.0070 — Upright, excluding sensitive (hand- directed), turret and deep-hole machines
- 8459.29.0090 — Other
- 8459.31.0005 — Used or rebuilt
- 8459.31.0010 — Table type, excluding planer type
- 8459.31.0040 — Other
- 8459.31.0070 — Other
- 8459.39.0010 — Used or rebuilt
- 8459.39.0020 — Other, valued under $3,025 each
- 8459.39.0040 — Horizontal spindle
- 8459.39.0050 — Other
- 8459.41.0010 — Used or rebuilt
- 8459.41.0020 — Other, valued under $3,025 each
- 8459.41.0030 — Vertical
- 8459.41.0090 — Other
- 8459.49.0010 — Used or rebuilt
- 8459.49.0020 — Other, valued under $3,025 each
- 8459.49.0030 — Vertical
- 8459.49.0090 — Other
- 8459.51.0040 — Used or rebuilt
- 8459.51.0080 — Other
- 8459.59.0010 — Used or rebuilt
- 8459.59.0020 — Other, valued under $3,025 each
- 8459.59.0030 — Other
- 8459.61.0040 — Used or rebuilt
- 8459.61.0080 — Other
- 8459.69.0010 — Used or rebuilt
- 8459.69.0020 — Other, valued under $3,025 each
- 8459.69.0050 — Profile, duplicating or die sinking
- 8459.69.0070 — Bed type
- 8459.69.0090 — Other
- 8459.70.4000 — Numerically controlled
- 8459.70.8040 — Used or rebuilt
- 8459.70.8060 — Other, valued under $3,025 each
- 8459.70.8080 — Other
- 8460.12.0040 — Used or rebuilt
- 8460.12.0080 — Other
- 8460.19.0105 — Used or rebuilt
- 8460.19.0110 — Reciprocating-table type
- 8460.19.0150 — Other
- 8460.22.0040 — Used or rebuilt
- 8460.22.0080 — Other
- 8460.23.0040 — Used or rebuilt
- 8460.23.0055 — External cylindrical, including universal
- 8460.23.0065 — Internal cylindrical
- 8460.23.0075 — Other
- 8460.24.0005 — Used or rebuilt
- 8460.24.0080 — Other
- 8460.29.0105 — Used or rebuilt
- 8460.29.0110 — External cylindrical, including universal
- 8460.29.0130 — Internal cylindrical
- 8460.29.0150 — Other
- 8460.31.0040 — Used or rebuilt
- 8460.31.0080 — Other
- 8460.39.0010 — Used or rebuilt
- 8460.39.0020 — Other, valued under $3,025 each
- 8460.39.0050 — Other
- 8460.40.4010 — Used or rebuilt
- 8460.40.4060 — Other
- 8460.40.8010 — Used or rebuilt
- 8460.40.8020 — Other, valued under $3,025 each
- 8460.40.8080 — Other
- 8460.90.4010 — Used or rebuilt
- 8460.90.4060 — Other
- 8460.90.8010 — Used or rebuilt
- 8460.90.8020 — Other, valued under $3,025 each
- 8460.90.8080 — Other
- 8461.20.4000 — Numerically controlled
- 8461.20.8030 — Used or rebuilt
- 8461.20.8070 — Other, valued under $3,025 each
- 8461.20.8090 — Other
- 8461.30.4020 — Used or rebuilt
- 8461.30.4060 — Other
- 8461.30.8020 — Used or rebuilt
- 8461.30.8040 — Other, valued under $3,025 each
- 8461.30.8080 — Other
- 8461.40.1010 — Used or rebuilt
- 8461.40.1020 — For bevel gears
- 8461.40.1030 — Gear hobbers
- 8461.40.1040 — Gear shapers
- 8461.40.1060 — Other
- 8461.40.5020 — Used or rebuilt
- 8461.40.5040 — Other, valued under $3,025 each
- 8461.40.5050 — For bevel gears
- 8461.40.5070 — Other
- 8461.50.4010 — Used or rebuilt
- 8461.50.4050 — Other
- 8461.50.8010 — Used or rebuilt
- 8461.50.8020 — Other, valued under $3,025 each
- 8461.50.8090 — Other
- 8461.90.3020 — Used or rebuilt
- 8461.90.3040 — Other
- 8461.90.3060 — Used or rebuilt
- 8461.90.3080 — Other
- 8461.90.6010 — Used or rebuilt
- 8461.90.6020 — Other, valued under $3,025 each
- 8461.90.6030 — Other
- 8461.90.6040 — Used or rebuilt
- 8461.90.6050 — Other, valued under $3,025 each
- 8461.90.6090 — Other
- 8462.11.0010 — Used or rebuilt
- 8462.11.0030 — Headers and upsetters, including cold headers
- 8462.11.0035 — Mechanical transfer presses
- 8462.11.0055 — Other
- 8462.19.0010 — Used or rebuilt
- 8462.19.0030 — Headers and upsetters, including cold headers
- 8462.19.0035 — Mechanical transfer presses
- 8462.19.0055 — Other
- 8462.22.0010 — Used or rebuilt
- 8462.22.0020 — Other, valued under $3,025 each
- 8462.22.0050 — Other
- 8462.23.0010 — Used or rebuilt
- 8462.23.0020 — Other, valued under $3,025 each
- 8462.23.0050 — Other
- 8462.24.0010 — Used or rebuilt
- 8462.24.0020 — Other, valued under $3,025 each
- 8462.24.0050 — Other
- 8462.25.0010 — Used or rebuilt
- 8462.25.0020 — Other, valued under $3,025 each
- 8462.25.0050 — Other
- 8462.26.0010 — Used or rebuilt
- 8462.26.0020 — Other, valued under $3,025 each
- 8462.26.0050 — Other
- 8462.29.0010 — Used or rebuilt
- 8462.29.0020 — Other, valued under $3,025 each
- 8462.29.0030 — Press brakes
- 8462.29.0040 — Bending rolls
- 8462.29.0050 — Other
- 8462.32.1040 — Used or rebuilt
- 8462.32.1080 — Other
- 8462.32.5010 — Used or rebuilt
- 8462.32.5020 — Other, valued under $3,025 each
- 8462.32.5050 — Other
- 8462.33.0040 — Used or rebuilt
- 8462.33.0080 — Other
- 8462.39.0010 — Used or rebuilt
- 8462.39.0020 — Other, valued under $3,025 each
- 8462.39.0050 — Other
- 8462.42.0040 — Used or rebuilt
- 8462.42.0080 — Other
- 8462.49.0010 — Used or rebuilt
- 8462.49.0020 — Other, valued under $3,025 each
- 8462.49.0050 — Other
- 8462.51.0040 — Used or rebuilt
- 8462.51.0080 — Other
- 8462.59.0010 — Used or rebuilt
- 8462.59.0020 — Other, valued under $3,025 each
- 8462.59.0050 — Other
- 8462.61.4030 — Used or rebuilt
- 8462.61.4060 — Other
- 8462.61.8030 — Used or rebuilt
- 8462.61.8090 — Other
- 8462.62.4010 — Used or rebuilt
- 8462.62.4030 — Other
- 8462.62.5030 — Used or rebuilt
- 8462.62.5090 — Other
- 8462.63.4010 — Used or rebuilt
- 8462.63.4030 — Other
- 8462.63.8010 — Used or rebuilt
- 8462.63.8020 — Other, valued under $3,025 each
- 8462.63.8060 — Other
- 8462.69.4010 — Used or rebuilt
- 8462.69.4030 — Other
- 8462.69.8010 — Used or rebuilt
- 8462.69.8020 — Other, valued under $3,025 each
- 8462.69.8060 — Other
- 8462.90.4010 — Used or rebuilt
- 8462.90.4030 — Other
- 8462.90.8010 — Used or rebuilt
- 8462.90.8020 — Other, valued under $3,025 each
- 8462.90.8060 — Other
- 8463.10.0040 — Used or rebuilt
- 8463.10.0060 — Other, valued under $3,025 each
- 8463.10.0080 — Other
- 8463.20.0040 — Used or rebuilt
- 8463.20.0060 — Other, valued under $3,025 each
- 8463.20.0080 — Other
- 8463.30.0040 — Used or rebuilt
- 8463.30.0060 — Other, valued under $3,025 each
- 8463.30.0080 — Other
- 8463.90.0040 — Used or rebuilt
- 8463.90.0060 — Other, valued under $3,025 each
- 8463.90.0080 — Other
- 8464.10.0100 — Sawing machines
- 8464.20.0110 — Glass-working machines
- 8464.20.0120 — Other
- 8464.90.0110 — Glass-working machines
- 8464.90.0120 — Other
- 8465.10.0005 — Tenoners
- 8465.10.0015 — Other
- 8465.10.0025 — Numerically controlled
- 8465.10.0035 — Other
- 8465.10.0045 — Other
- 8465.10.0050 — Other
- 8465.20.1000 — For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising
- 8465.20.5000 — For bending or assembling
- 8465.20.8000 — Other
- 8465.91.0002 — Rip saws
- 8465.91.0006 — Panel saws
- 8465.91.0012 — Band saws
- 8465.91.0016 — Cross-cut and optimizing saws
- 8465.91.0022 — Other
- 8465.91.0027 — Sawmill machines
- 8465.91.0032 — Radial arm saws
- 8465.91.0036 — Tilting arbor table saws
- 8465.91.0041 — Rip saws
- 8465.91.0047 — Miter saws
- 8465.91.0049 — Scroll saws
- 8465.91.0053 — Valued under $3,000 each
- 8465.91.0058 — Other
- 8465.91.0064 — Valued under $1,000 each
- 8465.91.0068 — Other
- 8465.91.0074 — Cross-cut and optimizing saws
- 8465.91.0078 — Other
- 8465.91.0091 — Other
- 8465.92.0003 — Moulders
- 8465.92.0006 — Routers
- 8465.92.0016 — Other
- 8465.92.0026 — Valued under $3,000 each
- 8465.92.0029 — Other
- 8465.92.0031 — Moulders
- 8465.92.0034 — Valued under $1,000 each
- 8465.92.0037 — Other
- 8465.92.0042 — Valued under $1,000 each
- 8465.92.0046 — Other
- 8465.92.0051 — Valued under $3,000 each
- 8465.92.0055 — Numerically controlled
- 8465.92.0058 — Other
- 8465.92.0062 — Valued under $1,000 each
- 8465.92.0066 — Other
- 8465.92.0072 — Other
- 8465.92.0091 — Other
- 8465.93.0004 — Belt sanders, for a belt width 60 cm or wider
- 8465.93.0012 — Other
- 8465.93.0030 — Valued under $1,000 each
- 8465.93.0045 — Valued $1,000 or over but under $3,000 each
- 8465.93.0055 — Other
- 8465.93.0065 — Belt sanders, for a belt width 60 cm or wider
- 8465.93.0075 — Other
- 8465.93.0091 — Other
- 8465.94.0005 — Used or rebuilt
- 8465.94.0015 — Doweling machines
- 8465.94.0025 — Edgebanding machines
- 8465.94.0035 — Laminating machines
- 8465.94.0045 — Cold
- 8465.94.0055 — Other
- 8465.94.0065 — Other
- 8465.94.0091 — Other
- 8465.95.0005 — Numerically controlled boring machines
- 8465.95.0010 — Other
- 8465.95.0020 — Numerically controlled
- 8465.95.0035 — Valued under $3,000 each
- 8465.95.0045 — Other
- 8465.95.0055 — Valued under $1,000 each
- 8465.95.0060 — Other
- 8465.95.0065 — Other
- 8465.95.0091 — Other
- 8465.96.0015 — Log splitters
- 8465.96.0025 — Chippers
- 8465.96.0030 — Hogs
- 8465.96.0040 — Other
- 8465.96.0051 — Other
- 8465.99.0210 — Debarkers
- 8465.99.0220 — Lathes
- 8465.99.0230 — Other
- 8465.99.0250 — Other
- 8466.10.0110 — Tool holders for forming-type or cutting-type dies
- 8466.10.0130 — Holders for replaceable cutting or drill inserts
- 8466.10.0175 — Other
- 8466.20.1010 — Jigs and fixtures
- 8466.20.1090 — Other
- 8466.20.8020 — Jigs and fixtures
- 8466.20.8035 — Other
- 8466.20.8040 — Jigs and fixtures
- 8466.20.8065 — Other
- 8466.30.1000 — Dividing heads
- 8466.30.6040 — For woodworking machines
- 8466.30.6085 — Other
- 8466.30.8000 — Other
- 8466.91.1000 — Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- 8466.91.5000 — Other
- 8466.92.1000 — Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery
- 8466.92.5010 — Of woodworking machines
- 8466.92.5090 — Other
- 8466.93.1100 — For water-jet cutting machines
- 8466.93.1530 — For metalworking machine tools for cutting, grinding or finishing gears
- 8466.93.1560 — Other
- 8466.93.3000 — Of metalworking machine tools for cutting gears
- 8466.93.5340 — Of metalworking machine tools for grinding or finishing gears
- 8466.93.5385 — Other
- 8466.93.6030 — For metalworking machine tools for cutting, grinding or finishing gears
- 8466.93.6060 — Other
- 8466.93.7500 — Of metalworking machine tools for cutting gears
- 8466.93.9600 — Parts and accessories of machine tools of subheadings 8456.11, 8456.12, 8456.30, 8457.10, 8458.91, 8459.21, 8459.61 and 8461.50, of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing machines
- 8466.93.9840 — Of metalworking machine tools for grinding or finishing gears
- 8466.93.9885 — Other
- 8466.94.2000 — Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications
- 8466.94.4000 — Other
- 8466.94.6540 — Parts of mechanical transfer presses
- 8466.94.6585 — Other
- 8466.94.8540 — Parts of mechanical transfer presses
- 8466.94.8585 — Other
- 8467.11.1040 — Grinders, polishers and sanders
- 8467.11.1080 — Other
- 8467.11.5010 — Rock drills
- 8467.11.5020 — Drills, other than rock drills; screwdrivers and nut runners
- 8467.11.5040 — Wrenches, other than nut runners
- 8467.11.5090 — Other
- 8467.19.1000 — Suitable for metal working
- 8467.19.5030 — Pneumatic, hand-held force feed lubricating equipment
- 8467.19.5060 — Designed for use in construction or mining
- 8467.19.5090 — Other
- 8467.21.0010 — Battery powered
- 8467.21.0030 — With a chuck capacity of less than 12.7 mm
- 8467.21.0050 — Other
- 8467.21.0070 — Other, including hammer drills
- 8467.22.0020 — Circular
- 8467.22.0040 — Chain
- 8467.22.0070 — Reciprocating and jig
- 8467.22.0090 — Other
- 8467.29.0010 — Angle grinders, sanders and polishers
- 8467.29.0015 — Orbital and straight-line sanders
- 8467.29.0025 — Belt sanders
- 8467.29.0035 — Other
- 8467.29.0040 — Screwdrivers, nut-runners and impact wrenches
- 8467.29.0055 — Routers
- 8467.29.0065 — Planers
- 8467.29.0070 — Grass and weed trimmers/edgers
- 8467.29.0080 — Electropneumatic rotary and percussion hammers
- 8467.29.0085 — Electric scissors
- 8467.29.0090 — Other
- 8467.81.0000 — Chain saws
- 8467.89.1000 — Suitable for metal working
- 8467.89.5030 — Gasoline powered grass and weed trimmers and brushcutters
- 8467.89.5060 — Other, designed for use in agriculture or horticulture
- 8467.89.5090 — Other
- 8467.91.0100 — Of chain saws
- 8467.92.0050 — Of pneumatic, hand-held force feed lubricating equipment
- 8467.92.0090 — Other
- 8467.99.0130 — Of gasoline powered grass and weed trimmers and brushcutters
- 8467.99.0190 — Other
- 8468.10.0000 — Hand-held blow torches
- 8468.20.1000 — Hand-directed or -controlled
- 8468.20.5000 — Other
- 8468.80.1000 — Hand-directed or -controlled
- 8468.80.5000 — Other
- 8468.90.1000 — Of hand-directed or -controlled machinery and apparatus
- 8468.90.5000 — Other
- 8470.10.0040 — Display only
- 8470.10.0060 — Other
- 8470.21.0000 — Incorporating a printing device
- 8470.29.0000 — Other
- 8470.30.0000 — Other calculating machines
- 8470.50.0020 — Point-of-sale terminals
- 8470.50.0060 — Other
- 8470.90.0110 — Postage-franking machines
- 8470.90.0190 — Other
- 8471.30.0100 — Portable automatic data processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display
- 8471.41.0110 — With cathode-ray tube (CRT)
- 8471.41.0150 — Other
- 8471.49.0000 — Other, entered in the form of systems
- 8471.50.0110 — With cathode-ray tube (CRT)
- 8471.50.0150 — Other
- 8471.60.1010 — With cathode-ray tube (CRT)
- 8471.60.1050 — Other
- 8471.60.2000 — Keyboards
- 8471.60.7000 — Units suitable for physical incorporation into automatic data processing machines or units thereof
- 8471.60.8000 — Optical scanners and magnetic ink recognition devices
- 8471.60.9030 — Card key and magnetic media entry devices
- 8471.60.9050 — Other
- 8471.70.1000 — Without read-write unit assembled therein; read-write units entered separately
- 8471.70.2000 — Units for physical incorporation into automatic data processing machines or units thereof
- 8471.70.3000 — Other
- 8471.70.4035 — Flexible (floppy) magnetic disk drive units
- 8471.70.4065 — Hard magnetic disk drive units
- 8471.70.4095 — Other
- 8471.70.5035 — Flexible (floppy) magnetic disk drive units
- 8471.70.5065 — Hard magnetic disk drive units
- 8471.70.5095 — Other
- 8471.70.6000 — Not assembled in cabinets for placing on a table, desk, wall, floor or similar place
- 8471.70.9000 — Other
- 8471.80.1000 — Control or adapter units
- 8471.80.4000 — Units suitable for physical incorporation into automatic data processing machines
- 8471.80.9000 — Other
- 8471.90.0000 — Other
- 8472.10.0000 — Duplicating machines
- 8472.30.0000 — Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or canceling postage stamps
- 8472.90.0500 — Addressing machines and address plate embossing machines
- 8472.90.1000 — Automatic teller machines
- 8472.90.4000 — Pencil sharpeners
- 8472.90.5000 — Typewriters other than printers of heading 8443; word processing machines
- 8472.90.6000 — Numbering, dating and check-writing machines
- 8472.90.9040 — Desktop note counters and note scanners
- 8472.90.9060 — Other currency and coin handling machines
- 8472.90.9080 — Other
- 8473.21.0000 — Of the electronic calculating machines of subheading 8470.10, 8470.21 or 8470.29
- 8473.29.0000 — Other
- 8473.30.1140 — Memory modules suitable for use solely or principally with machines of heading 8471
- 8473.30.1180 — Other
- 8473.30.2000 — Parts and accessories, including face plates and lock latches, of printed circuit assemblies
- 8473.30.5100 — Other
- 8473.30.9100 — Other
- 8473.40.1000 — Printed circuit assemblies for automatic teller machines of subheading 8472.90.10
- 8473.40.2100 — Printed circuit assemblies of word processing machines of 8472.90.50
- 8473.40.4100 — Other parts and accessories of the machines of 8472.90.50
- 8473.40.8600 — Other
- 8473.50.3000 — Printed circuit assemblies
- 8473.50.6000 — Parts and accessories, including face plates and lock latches, of printed circuit assemblies
- 8473.50.9000 — Other
- 8474.10.0010 — Portable
- 8474.10.0090 — Stationary
- 8474.20.0010 — Portable
- 8474.20.0050 — Crushing
- 8474.20.0070 — Other
- 8474.31.0000 — Concrete or mortar mixers
- 8474.32.0000 — Machines for mixing mineral substances with bitumen
- 8474.39.0000 — Other
- 8474.80.0010 — Designed for use with ceramic paste, unhardened cements and plastering materials
- 8474.80.0015 — Other
- 8474.80.0020 — Machines for forming foundry molds of sand
- 8474.80.0080 — Other
- 8474.90.0010 — Of sorting, screening, separating or washing machines
- 8474.90.0020 — Of crushing or grinding machines
- 8474.90.0050 — Of mixing or kneading machines
- 8474.90.0090 — Other
- 8475.10.0000 — Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
- 8475.21.0000 — Machines for making optical fibers and preforms thereof
- 8475.29.0000 — Other
- 8475.90.1000 — Of machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
- 8475.90.9000 — Other
- 8476.21.0000 — Incorporating heating or refrigerating devices
- 8476.29.0000 — Other
- 8476.81.0000 — Incorporating heating or refrigerating devices
- 8476.89.0000 — Other
- 8476.90.0000 — Parts
- 8477.10.3000 — For manufacturing shoes
- 8477.10.4000 — For use in the manufacture of optical media
- 8477.10.9015 — Of a type used for processing rubber or other thermosetting materials
- 8477.10.9030 — With a clamp force less than 50 tons
- 8477.10.9040 — With a clamp force equal to or greater than 50 tons and less than 300 tons
- 8477.10.9050 — With a clamp force equal to or greater than 300 tons and less than 750 tons
- 8477.10.9060 — With a clamp force equal to or greater than 750 tons
- 8477.20.0005 — Single screw
- 8477.20.0015 — Other, including multiple screw
- 8477.20.0035 — Less than 6.4 cm
- 8477.20.0045 — 6.4 cm or greater
- 8477.20.0055 — With a screw size less than 6.4 cm
- 8477.20.0065 — With a screw size 6.4 cm or greater
- 8477.30.0000 — Blow-molding machines
- 8477.40.0100 — Vacuum-molding machines and other thermoforming machines
- 8477.51.0010 — For molding or retreading pneumatic tires
- 8477.51.0090 — Other
- 8477.59.0100 — Other
- 8477.80.0100 — Other machinery
- 8477.90.2540 — Of machines of subheading 8477.10.30, 8477.10.40 or 8477.10.90
- 8477.90.2580 — Other
- 8477.90.4501 — Barrel screws
- 8477.90.6500 — Hydraulic assemblies incorporating more than one of the following: manifold; valves; pump; oil cooler
- 8477.90.8601 — Of injection-molding machines
- 8477.90.8620 — Of extruders
- 8477.90.8630 — Of blow-molding machines
- 8477.90.8640 — Of machines for forming pneumatic tires
- 8477.90.8695 — Other parts
- 8478.10.0010 — Industrial cigarette-making machines
- 8478.10.0090 — Other
- 8478.90.0010 — Parts of industrial cigarette-making machines
- 8478.90.0090 — Other
- 8479.10.0040 — For concrete
- 8479.10.0060 — For bituminous material
- 8479.10.0080 — Other
- 8479.20.0000 — Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils
- 8479.30.0000 — Presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork
- 8479.40.0000 — Rope or cable-making machines
- 8479.50.0000 — Industrial robots, not elsewhere specified or included
- 8479.60.0000 — Evaporative air coolers
- 8479.71.0000 — Of a kind used in airports
- 8479.79.0000 — Other
- 8479.81.0000 — For treating metal, including electric wire coil-winders
- 8479.82.0040 — Mixing, kneading or stirring machines
- 8479.82.0080 — Other
- 8479.83.0000 — Cold isostatic presses
- 8479.89.1000 — Air humidifiers or dehumidifiers
- 8479.89.2000 — Floor polishers
- 8479.89.5500 — Trash compactors
- 8479.89.6500 — Other
- 8479.89.7000 — Carpet sweepers
- 8479.89.8300 — Machines for the manufacturing of optical media
- 8479.89.9200 — Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies
- 8479.89.9550 — Oil and gas field wireline and downhole equipment
- 8479.89.9560 — Automotive maintenance machines
- 8479.89.9565 — Hydraulic accumulators
- 8479.89.9585 — Ultrasonic cleaning devices
- 8479.89.9595 — Industrial vibrators
- 8479.89.9596 — Tow behind sweepers
- 8479.89.9599 — Other
- 8479.90.4100 — Of articles of subheading 8479.89.10 or 8479.89.70
- 8479.90.4500 — Frame assemblies incorporating more than one of the following: baseplate; side frames; power screws; front plates
- 8479.90.5500 — Ram assemblies incorporating a ram wrapper and/or ram cover
- 8479.90.6500 — Container assemblies incorporating more than one of the following: container bottom; container wrapper; slide track; container front
- 8479.90.7500 — Cabinets or cases
- 8479.90.8500 — Other
- 8479.90.9530 — Of industrial robots
- 8479.90.9550 — Of machinery for public works, building or the like
- 8479.90.9560 — Of presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork
- 8479.90.9565 — Of machines or mechanical appliances for treating metal
- 8479.90.9596 — Other
- 8480.10.0000 — Molding boxes for metal foundry
- 8480.20.0000 — Mold bases
- 8480.30.0000 — Molding patterns
- 8480.41.0000 — Injection or compression types
- 8480.49.0010 — Molds for centrifugal casting of ductile iron pipe
- 8480.49.0090 — Other
- 8480.50.0010 — Injection or compression types
- 8480.50.0090 — Other types
- 8480.60.0010 — Injection or compression types
- 8480.60.0090 — Other types
- 8480.71.1000 — For shoe machinery
- 8480.71.4000 — For the manufacture of semiconductor devices
- 8480.71.8020 — Temporarily imported for testing, calibration, examination, repair or alteration; returned after being exported for testing, calibration, examination, repair or alteration
- 8480.71.8045 — Injection type
- 8480.71.8060 — Compression type
- 8480.79.1000 — Molds for shoe machinery
- 8480.79.9010 — Blow molds
- 8480.79.9020 — Bladder operated molds
- 8480.79.9090 — Other molds
- 8481.10.0020 — Hydraulic fluid power type
- 8481.10.0040 — Filter-regulators and filter-regulator-lubricators
- 8481.10.0060 — Other
- 8481.10.0090 — Other
- 8481.20.0010 — Manual type
- 8481.20.0020 — Solenoid type
- 8481.20.0030 — Other
- 8481.20.0040 — Flow control type
- 8481.20.0050 — Other
- 8481.20.0060 — Solenoid type
- 8481.20.0070 — Other
- 8481.20.0080 — Other
- 8481.30.1010 — Having a pressure rating under 850 kPa
- 8481.30.1090 — Having a pressure rating of 850 kPa or over
- 8481.30.2010 — Of iron
- 8481.30.2090 — Of steel
- 8481.30.9000 — Other
- 8481.40.0000 — Safety or relief valves
- 8481.80.1020 — Bath and shower faucets
- 8481.80.1030 — Sink and lavatory faucets
- 8481.80.1040 — Supply stops
- 8481.80.1050 — Other
- 8481.80.1060 — Gate type
- 8481.80.1070 — Globe type
- 8481.80.1075 — Plug type
- 8481.80.1085 — Ball type
- 8481.80.1090 — Butterfly type
- 8481.80.1095 — Other
- 8481.80.3010 — Gate type
- 8481.80.3015 — Globe type
- 8481.80.3020 — Plug type
- 8481.80.3025 — Ball type
- 8481.80.3030 — Butterfly type
- 8481.80.3040 — Other
- 8481.80.3055 — Gate type
- 8481.80.3060 — Globe type
- 8481.80.3065 — Plug type
- 8481.80.3070 — Ball type
- 8481.80.3075 — Butterfly type
- 8481.80.3090 — Other
- 8481.80.5040 — Pressure spray can valves
- 8481.80.5060 — Bath, shower, sink and lavatory faucets
- 8481.80.5090 — Other
- 8481.80.9005 — Solenoid valves
- 8481.80.9010 — Ballcock mechanisms
- 8481.80.9015 — Regulator valves, self-operating, for controlling variables such as temperature, pressure, flow and liquid level
- 8481.80.9020 — Control valves designed for proportional operation by a signal from a control device
- 8481.80.9025 — Other
- 8481.80.9030 — With hydraulic actuators
- 8481.80.9035 — Control valves designed for proportional operation by a signal from a control device
- 8481.80.9040 — Other
- 8481.80.9045 — With thermostatic actuators
- 8481.80.9050 — Other
- 8481.90.1000 — Of copper
- 8481.90.3000 — Of iron or steel
- 8481.90.5000 — Of other materials
- 8481.90.9020 — Valve bodies
- 8481.90.9040 — Other
- 8481.90.9060 — Valve bodies
- 8481.90.9081 — Steel forgings
- 8481.90.9085 — Other
- 8482.10.1040 — Bearings having an outside diameter not over 30 mm
- 8482.10.1080 — Other
- 8482.10.5004 — Unground bearings
- 8482.10.5008 — Thrust bearings
- 8482.10.5012 — Linear bearings
- 8482.10.5016 — Flanged
- 8482.10.5024 — Other
- 8482.10.5028 — Other
- 8482.10.5032 — Maximum or full capacity type
- 8482.10.5036 — Under 9 mm
- 8482.10.5044 — 9 mm and over but not over 30 mm
- 8482.10.5048 — Over 30 mm but not over 52 mm
- 8482.10.5052 — Over 52 mm but not over 100 mm.
- 8482.10.5056 — Over 100 mm
- 8482.10.5060 — Double row ball bearings
- 8482.10.5064 — Other
- 8482.10.5068 — Other
- 8482.20.0020 — Flanged
- 8482.20.0030 — Other
- 8482.20.0040 — With cups having an outside diameter not exceeding 102 mm
- 8482.20.0061 — With cups having an outside diameter exceeding 102 mm but not exceeding 203 mm
- 8482.20.0064 — With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm
- 8482.20.0067 — Other
- 8482.20.0070 — For cups having an outside diameter not exceeding 102 mm
- 8482.20.0081 — For cups having an outside diameter exceeding 102 mm but not exceeding 203 mm
- 8482.20.0090 — Other
- 8482.30.0040 — Single row
- 8482.30.0080 — Other
- 8482.40.0000 — Needle roller bearings, including cage and needle roller assemblies
- 8482.50.0000 — Other cylindrical roller bearings, including cage and roller assemblies
- 8482.80.0020 — Combined ball and spherical roller bearings
- 8482.80.0040 — Combined ball and needle roller bearings
- 8482.80.0060 — Combined ball and other cylindrical roller bearings
- 8482.80.0080 — Other
- 8482.91.0010 — Of alloy steel
- 8482.91.0015 — Of copper or copper alloys as described in statistical note 6 to this chapter
- 8482.91.0030 — Other
- 8482.91.0040 — Needles
- 8482.91.0050 — Tapered rollers
- 8482.91.0070 — Spherical rollers
- 8482.91.0080 — Other cylindrical rollers
- 8482.91.0090 — Other
- 8482.99.0500 — For ball bearings
- 8482.99.1550 — Having an outside diameter not exceeding 203 mm
- 8482.99.1570 — Other
- 8482.99.1580 — Other
- 8482.99.2520 — For spherical roller bearings
- 8482.99.2540 — For needle bearings
- 8482.99.2560 — For other cylindrical roller bearings
- 8482.99.2580 — Other
- 8482.99.3500 — Parts of ball bearings (including parts of ball bearings with integral shafts)
- 8482.99.4500 — Parts of tapered roller bearings
- 8482.99.6510 — For spherical roller bearings
- 8482.99.6530 — For needle bearings
- 8482.99.6560 — For other cylindrical roller bearings
- 8482.99.6595 — Other
- 8483.10.1010 — For motorcycles
- 8483.10.1030 — Other
- 8483.10.1050 — Other
- 8483.10.3010 — For vehicles of chapter 87
- 8483.10.3050 — Other
- 8483.10.5000 — Other transmission shafts and cranks
- 8483.20.4040 — Incorporating ball bearings
- 8483.20.4080 — Incorporating roller bearings
- 8483.20.8040 — Incorporating ball bearings
- 8483.20.8080 — Incorporating roller bearings
- 8483.30.4040 — Ball or roller bearing type
- 8483.30.4080 — Other
- 8483.30.8020 — Ball or roller bearing type
- 8483.30.8040 — Other
- 8483.30.8055 — Rod end bearings
- 8483.30.8065 — Other
- 8483.30.8070 — Spherical
- 8483.30.8090 — Other
- 8483.40.1000 — Torque converters
- 8483.40.3040 — Fixed ratio speed changers
- 8483.40.3080 — Other
- 8483.40.5010 — Fixed ratio speed changers
- 8483.40.5020 — Gear boxes and speed changers for wind turbines, as described in statistical note 6 to this chapter
- 8483.40.5080 — Other
- 8483.40.7000 — Other speed changers
- 8483.40.8000 — Ball or roller screws
- 8483.40.9000 — Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately
- 8483.50.4000 — Gray-iron awning or tackle pulleys, not over 6.4 cm in wheel diameter
- 8483.50.6000 — Flywheels
- 8483.50.9040 — Grooved pulleys
- 8483.50.9080 — Other
- 8483.60.4040 — Clutches
- 8483.60.4080 — Universal joints
- 8483.60.8000 — Other
- 8483.90.1010 — Forged
- 8483.90.1050 — Other
- 8483.90.2000 — Parts of flange, take-up, cartridge and hanger units
- 8483.90.3000 — Other
- 8483.90.5010 — Forged gear blanks
- 8483.90.5020 — Parts of gear boxes and speed changers for wind turbines
- 8483.90.5080 — Other
- 8483.90.7000 — Parts of articles of subheading 8483.20
- 8483.90.8010 — Parts of articles of subheading 8483.60.80
- 8483.90.8040 — Parts of universal joints
- 8483.90.8080 — Other
- 8484.10.0000 — Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal
- 8484.20.0000 — Mechanical seals
- 8484.90.0000 — Other
- 8485.10.0100 — By metal deposit
- 8485.20.0000 — By plastics or rubber deposit
- 8485.30.0000 — By plaster, cement, ceramics or glass deposit
- 8485.80.0000 — Other
- 8485.90.1000 — By plastics or rubber deposit
- 8485.90.9000 — Other
- 8486.10.0000 — Machines and apparatus for the manufacture of boules or wafers
- 8486.20.0000 — Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits
- 8486.30.0000 — Machines and apparatus for the manufacture of flat panel displays
- 8486.40.0010 — For the manufacture or repair of masks and reticles
- 8486.40.0020 — For assembling semiconductor devices or electronic integrated circuits
- 8486.40.0030 — For lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays
- 8486.90.0000 — Parts and accessories
- 8487.10.0040 — Of copper
- 8487.10.0080 — Other
- 8487.90.0040 — Oil seals, other than those of chapter 40
- 8487.90.0080 — Other
Recent changes
No rate changes have been recorded for this chapter recently — this tariff has been stable.