Chapter 73 — Iron and steel articles
TaiwanBrowse every tariff line under HTS Chapter 73 — Iron and steel articles for goods from Taiwan. Select a line to see its full duty stack.
Tariff lines 573 lines
7301 Sheet piling of iron or steel, whether or not drilled,…
7302 Railway or tramway track construction material of iron…
- 7302.10.1010 Rails, Of iron or nonalloy steel, New, Not heat treated
- 7302.10.1015 Rails, Of iron or nonalloy steel, New, Not heat treated, Other
- 7302.10.1025 Rails, Of iron or nonalloy steel, New, Not heat treated, Other
- 7302.10.1035 Rails, Of iron or nonalloy steel, New, Heat treated
- 7302.10.1045 Rails, Of iron or nonalloy steel, New, Heat treated, Other
- 7302.10.1055 Rails, Of iron or nonalloy steel, New, Heat treated, Other
- 7302.10.1065 Rails, Of iron or nonalloy steel, Used, Railway rails for rerolling
- 7302.10.1075 Rails, Of iron or nonalloy steel, Used
- 7302.10.5020 Rails, Of alloy steel, New
- 7302.10.5040 Rails, Of alloy steel, Used, Railway rails for rerolling
- 7302.10.5060 Rails, Of alloy steel, Used
- 7302.30.0000 Switch blades, crossing frogs, point rods and other crossing pieces
- 7302.40.0000 Fish-plates and sole plates
- 7302.90.1000 Sleepers (cross-ties)
- 7302.90.9000 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails
7303 Tubes, pipes and hollow profiles, of cast iron
7304 Tubes, pipes and hollow profiles, seamless, of iron…
- 7304.11.0020 Line pipe of a kind used for oil or gas pipelines, Of stainless steel
- 7304.11.0050 Line pipe of a kind used for oil or gas pipelines, Of stainless steel
- 7304.11.0080 Line pipe of a kind used for oil or gas pipelines, Of stainless steel
- 7304.19.1020 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel
- 7304.19.1030 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel
- 7304.19.1045 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel, Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm
- 7304.19.1060 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel, Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm
- 7304.19.1080 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel
- 7304.19.5020 Line pipe of a kind used for oil or gas pipelines, Of other alloy steel
- 7304.19.5050 Line pipe of a kind used for oil or gas pipelines, Of other alloy steel
- 7304.19.5080 Line pipe of a kind used for oil or gas pipelines, Of other alloy steel
- 7304.22.0030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Drill pipe of stainless steel, Having an outside diameter not exceeding 168.3 mm
- 7304.22.0045 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Drill pipe of stainless steel, Having an outside diameter not exceeding 168.3 mm
- 7304.22.0060 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Drill pipe of stainless steel
- 7304.23.3000 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other drill pipe, Of iron or nonalloy steel
- 7304.23.6030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other drill pipe, Of alloy steel, Having an outside diameter not exceeding 168.3 mm
- 7304.23.6045 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other drill pipe, Of alloy steel, Having an outside diameter not exceeding 168.3 mm
- 7304.23.6060 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other drill pipe, Of alloy steel
- 7304.24.3010 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Threaded or coupled, Having an outside diameter less than 215.9 mm
- 7304.24.3020 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Threaded or coupled, Having an outside diameter less than 215.9 mm
- 7304.24.3030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Threaded or coupled, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.24.3040 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Threaded or coupled, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.24.3045 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Threaded or coupled
- 7304.24.3080 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Threaded or coupled
- 7304.24.4010 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Having an outside diameter less than 215.9 mm
- 7304.24.4020 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Having an outside diameter less than 215.9 mm
- 7304.24.4030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.24.4040 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.24.4050 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.24.4060 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.24.4080 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Casing
- 7304.24.6015 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Tubing, Having an outside diameter not exceeding 114.3 mm
- 7304.24.6030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Tubing, Having an outside diameter not exceeding 114.3 mm
- 7304.24.6045 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Tubing
- 7304.24.6060 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Tubing
- 7304.24.6075 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Other, of stainless steel, Tubing
- 7304.29.1010 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled, Having an outside diameter less than 215.9 mm
- 7304.29.1020 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled, Having an outside diameter less than 215.9 mm
- 7304.29.1030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.1040 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.1050 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.1060 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.1080 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled
- 7304.29.2010 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Having an outside diameter less than 215.9 mm
- 7304.29.2020 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Having an outside diameter less than 215.9 mm
- 7304.29.2030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.2040 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.2050 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.2060 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.2080 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel
- 7304.29.3110 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Threaded or coupled, Having an outside diameter less than 215.9 mm
- 7304.29.3120 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Threaded or coupled, Having an outside diameter less than 215.9 mm
- 7304.29.3130 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Threaded or coupled, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.3140 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Threaded or coupled, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.3150 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Threaded or coupled, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.3160 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Threaded or coupled, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.3180 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Threaded or coupled
- 7304.29.4110 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Having an outside diameter less than 215.9 mm
- 7304.29.4120 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Having an outside diameter less than 215.9 mm
- 7304.29.4130 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.4140 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
- 7304.29.4150 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.4160 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.29.4180 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Casing, Of other alloy steel
- 7304.29.5015 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of iron or nonalloy steel, Having an outside diameter not exceeding 114.3 mm
- 7304.29.5030 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of iron or nonalloy steel, Having an outside diameter not exceeding 114.3 mm
- 7304.29.5045 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of iron or nonalloy steel
- 7304.29.5060 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of iron or nonalloy steel
- 7304.29.5075 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of iron or nonalloy steel
- 7304.29.6115 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of other alloy steel, Having an outside diameter not exceeding 114.3 mm
- 7304.29.6130 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of other alloy steel, Having an outside diameter not exceeding 114.3 mm
- 7304.29.6145 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of other alloy steel
- 7304.29.6160 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of other alloy steel
- 7304.29.6175 Casing, tubing and drill pipe, of a kind used in drilling for oil or gas, Tubing, Of other alloy steel
- 7304.31.3000 Other, of circular cross section, of iron or nonalloy steel, Cold-drawn or cold-rolled (cold-reduced), Hollow bars
- 7304.31.6010 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.31.6050 Other, of circular cross section, of iron or nonalloy steel, Cold-drawn or cold-rolled (cold-reduced)
- 7304.39.0002 Other, of circular cross section, of iron or nonalloy steel, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.39.0004 Other, of circular cross section, of iron or nonalloy steel, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.39.0006 Other, of circular cross section, of iron or nonalloy steel, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.39.0008 Other, of circular cross section, of iron or nonalloy steel, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.39.0016 Other, of circular cross section, of iron or nonalloy steel, Other
- 7304.39.0020 Other, of circular cross section, of iron or nonalloy steel, Other
- 7304.39.0024 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.39.0028 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.39.0032 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.39.0036 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.39.0040 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.39.0044 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.39.0048 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.39.0052 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.39.0056 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.39.0062 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.39.0068 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.39.0072 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.39.0076 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 406.4 mm
- 7304.39.0080 Other, of circular cross section, of iron or nonalloy steel, Other, Having an outside diameter exceeding 406.4 mm
- 7304.41.3005 Other, of circular cross section, of stainless steel, Cold-drawn or cold-rolled (cold-reduced), Of high-nickel alloy steel
- 7304.41.3015 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.41.3045 Other, of circular cross section, of stainless steel, Cold-drawn or cold-rolled (cold-reduced), Other
- 7304.41.6005 Other, of circular cross section, of stainless steel, Cold-drawn or cold-rolled (cold-reduced), Of high-nickel alloy steel
- 7304.41.6015 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.41.6045 Other, of circular cross section, of stainless steel, Cold-drawn or cold-rolled (cold-reduced), Other
- 7304.49.0005 Other, of circular cross section, of stainless steel, Of high-nickel alloy steel
- 7304.49.0015 Other, of circular cross section, of stainless steel, Other, Hollow bars
- 7304.49.0045 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.49.0060 Other, of circular cross section, of stainless steel, Other
- 7304.51.1000 Suitable for use in the manufacture of ball or roller bearings
- 7304.51.5005 Other, of circular cross section, of other alloy steel, Cold-drawn or cold-rolled (cold-reduced), Of high-nickel alloy steel
- 7304.51.5015 Other, of circular cross section, of other alloy steel, Cold-drawn or cold-rolled (cold-reduced), Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Of heat-resisting steel
- 7304.51.5045 Other, of circular cross section, of other alloy steel, Cold-drawn or cold-rolled (cold-reduced), Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.51.5060 Other, of circular cross section, of other alloy steel, Cold-drawn or cold-rolled (cold-reduced), Other
- 7304.59.1000 Suitable for use in the manufacture of ball or roller bearings
- 7304.59.2030 Other, of circular cross section, of other alloy steel, Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Of heat-resisting steel
- 7304.59.2040 Other, of circular cross section, of other alloy steel, Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Other
- 7304.59.2045 Other, of circular cross section, of other alloy steel, Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Other
- 7304.59.2055 Other, of circular cross section, of other alloy steel, Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Other
- 7304.59.2060 Other, of circular cross section, of other alloy steel, Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Other
- 7304.59.2070 Other, of circular cross section, of other alloy steel, Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Other
- 7304.59.2080 Other, of circular cross section, of other alloy steel, Other, Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, Other
- 7304.59.6000 Other, of circular cross section, of other alloy steel, Other, Of heat-resisting steel
- 7304.59.8010 Other, of circular cross section, of other alloy steel, Other
- 7304.59.8015 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.59.8020 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.59.8025 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.59.8030 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.59.8035 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.59.8040 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.59.8045 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.59.8050 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.59.8055 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.59.8060 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.59.8065 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.59.8070 Other, of circular cross section, of other alloy steel, Other, Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.59.8080 Other, of circular cross section, of other alloy steel, Other
- 7304.90.1000 Having a wall thickness of 4 mm or more, Of iron or nonalloy steel
- 7304.90.3000 Having a wall thickness of 4 mm or more, Of alloy steel
- 7304.90.5000 Having a wall thickness of less than 4 mm, Of iron or nonalloy steel
- 7304.90.7000 Having a wall thickness of less than 4 mm, Of alloy steel
7305 Other tubes and pipes (for example, welded, riveted or…
- 7305.11.1030 Line pipe of a kind used for oil or gas pipelines, Longitudinally submerged arc welded, Of iron or nonalloy steel
- 7305.11.1060 Line pipe of a kind used for oil or gas pipelines, Longitudinally submerged arc welded, Of iron or nonalloy steel
- 7305.11.5000 Line pipe of a kind used for oil or gas pipelines, Longitudinally submerged arc welded, Of alloy steel
- 7305.12.1030 Line pipe of a kind used for oil or gas pipelines, Other, longitudinally welded, Of iron or nonalloy steel
- 7305.12.1060 Line pipe of a kind used for oil or gas pipelines, Other, longitudinally welded, Of iron or nonalloy steel
- 7305.12.5000 Line pipe of a kind used for oil or gas pipelines, Other, longitudinally welded, Of alloy steel
- 7305.19.1030 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel
- 7305.19.1060 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel
- 7305.19.5000 Line pipe of a kind used for oil or gas pipelines, Of alloy steel
- 7305.20.2000 Casing of a kind used in drilling for oil or gas, Of iron or nonalloy steel, Threaded or coupled
- 7305.20.4000 Casing of a kind used in drilling for oil or gas, Of iron or nonalloy steel
- 7305.20.6000 Casing of a kind used in drilling for oil or gas, Of alloy steel, Threaded or coupled
- 7305.20.8000 Casing of a kind used in drilling for oil or gas, Of alloy steel
- 7305.31.2000 Tapered pipes and tubes of steel principally used as parts of illuminating articles
- 7305.31.4000 Other, welded, Longitudinally welded, Other, Of iron or nonalloy steel
- 7305.31.6010 Other, welded, Longitudinally welded, Other, Of alloy steel, Of stainless steel
- 7305.31.6090 Other, welded, Longitudinally welded, Other, Of alloy steel
- 7305.39.1000 Other, welded, Of iron or nonalloy steel
- 7305.39.5000 Other, welded, Of alloy steel
- 7305.90.1000 Of iron or nonalloy steel
- 7305.90.5000 Of alloy steel
7306 Other tubes, pipes and hollow profiles (for example,…
- 7306.11.0010 Line pipe of a kind used for oil or gas pipelines, Welded, of stainless steel
- 7306.11.0050 Line pipe of a kind used for oil or gas pipelines, Welded, of stainless steel
- 7306.19.1010 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel
- 7306.19.1050 Line pipe of a kind used for oil or gas pipelines, Of iron or nonalloy steel
- 7306.19.5110 Line pipe of a kind used for oil or gas pipelines, Of alloy steel
- 7306.19.5150 Line pipe of a kind used for oil or gas pipelines, Of alloy steel
- 7306.21.3000 Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Casing, Threaded or coupled
- 7306.21.4000 Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Casing
- 7306.21.8010 Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Tubing, Imported with coupling
- 7306.21.8050 Casing and tubing of a kind used in drilling for oil or gas, Welded of stainless steel, Tubing
- 7306.29.1030 Casing and tubing of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled, Imported with coupling
- 7306.29.1090 Casing and tubing of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel, Threaded or coupled
- 7306.29.2000 Casing and tubing of a kind used in drilling for oil or gas, Casing, Of iron or nonalloy steel
- 7306.29.3100 Casing and tubing of a kind used in drilling for oil or gas, Casing, Other, Threaded or coupled
- 7306.29.4100 Casing and tubing of a kind used in drilling for oil or gas, Casing, Other
- 7306.29.6010 Casing and tubing of a kind used in drilling for oil or gas, Tubing, Of iron or nonalloy steel, Imported with coupling
- 7306.29.6050 Casing and tubing of a kind used in drilling for oil or gas, Tubing, Of iron or nonalloy steel
- 7306.29.8110 Casing and tubing of a kind used in drilling for oil or gas, Tubing, Imported with coupling
- 7306.29.8150 Casing and tubing of a kind used in drilling for oil or gas, Tubing
- 7306.30.1010 Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
- 7306.30.1090 Other, welded, of circular cross section, of iron or nonalloy steel
- 7306.30.3000 Tapered steel pipes and tubes principally used as parts of illuminating articles
- 7306.30.5010 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn
- 7306.30.5015 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, cold-drawn
- 7306.30.5020 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more
- 7306.30.5026 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Galvanized, Imported with coupling
- 7306.30.5027 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Galvanized, Imported with coupling
- 7306.30.5028 Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
- 7306.30.5031 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Galvanized, Other
- 7306.30.5033 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Galvanized, Other
- 7306.30.5035 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Other, Tube and pipe hollows for redrawing
- 7306.30.5041 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Other, Imported with coupling
- 7306.30.5043 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Other, Imported with coupling
- 7306.30.5056 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Other
- 7306.30.5057 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter not exceeding 114.3 mm, Other
- 7306.30.5085 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm, Galvanized
- 7306.30.5090 Other, welded, of circular cross section, of iron or nonalloy steel, Having a wall thickness of 1.65 mm or more, Other, With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
- 7306.40.1010 Other, welded, of circular cross section, of stainless steel, Containing more than 0.5 percent by weight of nickel
- 7306.40.1015 Other, welded, of circular cross section, of stainless steel, Containing more than 0.5 percent by weight of nickel
- 7306.40.1090 Other, welded, of circular cross section, of stainless steel
- 7306.40.5005 Other, welded, of circular cross section, of stainless steel, Of high-nickel alloy steel
- 7306.40.5015 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
- 7306.40.5040 Other, welded, of circular cross section, of stainless steel, Other, Other, cold-drawn or cold-rolled (cold- reduced)
- 7306.40.5042 Other, welded, of circular cross section, of stainless steel, Other, Other, cold-drawn or cold-rolled (cold- reduced), Other
- 7306.40.5044 Other, welded, of circular cross section, of stainless steel, Other, Other, cold-drawn or cold-rolled (cold- reduced), Other
- 7306.40.5062 Other, welded, of circular cross section, of stainless steel, Other, With an outside diameter not exceeding 114.3 mm, Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7306.40.5064 Other, welded, of circular cross section, of stainless steel, Other, With an outside diameter not exceeding 114.3 mm, Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7306.40.5080 Other, welded, of circular cross section, of stainless steel, Other, With an outside diameter not exceeding 114.3 mm
- 7306.40.5085 Other, welded, of circular cross section, of stainless steel, Other, With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
- 7306.40.5090 Other, welded, of circular cross section, of stainless steel, Other, With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
- 7306.50.1000 Other, welded, of circular cross section, of other alloy steel
- 7306.50.3000 Tapered pipes and tubes of steel principally used as parts of illuminating articles
- 7306.50.5010 Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
- 7306.50.5030 Other, welded, of circular cross section, of other alloy steel, Having a wall thickness of 1.65 mm or more, Other, cold-drawn or cold-rolled (cold- reduced)
- 7306.50.5050 Other, welded, of circular cross section, of other alloy steel, Having a wall thickness of 1.65 mm or more, Other
- 7306.50.5070 Other, welded, of circular cross section, of other alloy steel, Having a wall thickness of 1.65 mm or more, Other
- 7306.61.1000 Other, welded, of noncircular cross section, Of square or rectangular cross section, Having a wall thickness of 4 mm or more, Of iron or nonalloy steel
- 7306.61.3000 Other, welded, of noncircular cross section, Of square or rectangular cross section, Having a wall thickness of 4 mm or more, Of alloy steel
- 7306.61.5000 Other, welded, of noncircular cross section, Of square or rectangular cross section, Having a wall thickness of less than 4 mm, Of iron or nonalloy steel
- 7306.61.7030 Other, welded, of noncircular cross section, Of square or rectangular cross section, Having a wall thickness of less than 4 mm, Of alloy steel, Of stainless steel
- 7306.61.7060 Other, welded, of noncircular cross section, Of square or rectangular cross section, Having a wall thickness of less than 4 mm, Of alloy steel
- 7306.69.1000 Other, welded, of noncircular cross section, Of other noncircular cross section, Having a wall thickness of 4 mm or more, Of iron or nonalloy steel
- 7306.69.3000 Other, welded, of noncircular cross section, Of other noncircular cross section, Having a wall thickness of 4 mm or more, Of alloy steel
- 7306.69.5000 Other, welded, of noncircular cross section, Of other noncircular cross section, Having a wall thickness of less than 4 mm, Of iron or nonalloy steel
- 7306.69.7030 Other, welded, of noncircular cross section, Of other noncircular cross section, Having a wall thickness of less than 4 mm, Of alloy steel, Of stainless steel
- 7306.69.7060 Other, welded, of noncircular cross section, Of other noncircular cross section, Having a wall thickness of less than 4 mm, Of alloy steel
- 7306.90.1000 Of iron or nonalloy steel
- 7306.90.5000 Of alloy steel
7307 Tube or pipe fittings (for example, couplings, elbows,…
- 7307.11.0030 Cast fittings, Of nonmalleable cast iron, For threaded pipe
- 7307.11.0045 Cast fittings, Of nonmalleable cast iron, Other, For cast-iron soil pipe
- 7307.11.0060 Cast fittings, Of nonmalleable cast iron, Other
- 7307.19.3040 Grooved-end fittings (including grooved couplings)
- 7307.19.3060 Cast fittings, Ductile fittings, Other, Threaded
- 7307.19.3070 With mechanical, push-on (rubber compression) or flanged joints attached
- 7307.19.3085 Cast fittings, Ductile fittings, Other
- 7307.19.9030 Cast fittings, Unions
- 7307.19.9040 Grooved-end fittings (including grooved couplings)
- 7307.19.9060 Cast fittings, Other, Threaded
- 7307.19.9080 Cast fittings, Other
- 7307.21.1000 Not machined, not tooled and not otherwise processed after forging
- 7307.21.5000 Other, of stainless steel, Flanges
- 7307.22.1000 Other, of stainless steel, Threaded elbows, bends and sleeves, Sleeves (couplings)
- 7307.22.5000 Other, of stainless steel, Threaded elbows, bends and sleeves
- 7307.23.0030 Not machined, not tooled and not otherwise processed after forming
- 7307.23.0090 Other, of stainless steel, Butt welding fittings
- 7307.29.0030 Other, of stainless steel, Nipples
- 7307.29.0090 Other, of stainless steel
- 7307.91.1000 Other, Flanges, Not machined, not tooled and not otherwise processed after forging, Of iron or nonalloy steel
- 7307.91.3000 Other, Flanges, Not machined, not tooled and not otherwise processed after forging, Of alloy steel (except stainless steel)
- 7307.91.5010 Other, Flanges, With an inside diameter of less than 360 mm, Of iron or nonalloy steel
- 7307.91.5030 Other, Flanges, With an inside diameter of less than 360 mm, Of alloy steel (except stainless steel)
- 7307.91.5050 Other, Flanges, With an inside diameter of 360 mm or more, Of iron or nonalloy steel
- 7307.91.5070 Other, Flanges, With an inside diameter of 360 mm or more, Of alloy steel (except stainless steel)
- 7307.92.3010 Other, Threaded elbows, bends and sleeves, Sleeves (couplings), Of iron or nonalloy steel
- 7307.92.3030 Other, Threaded elbows, bends and sleeves, Sleeves (couplings), Of alloy steel (except stainless steel)
- 7307.92.9000 Other, Threaded elbows, bends and sleeves
- 7307.93.3010 Not machined, not tooled and not otherwise processed after forging
- 7307.93.3040 Other, Butt welding fittings, With an inside diameter of less than 360 mm, Of iron or nonalloy steel
- 7307.93.6000 Other, Butt welding fittings, With an inside diameter of less than 360 mm, Of alloy steel (except stainless steel)
- 7307.93.9010 Not machined, not tooled and not otherwise processed after forging
- 7307.93.9040 Other, Butt welding fittings, Of iron or nonalloy steel
- 7307.93.9060 Other, Butt welding fittings, Of alloy steel (except stainless steel)
- 7307.99.1000 Other, Not machined, not tooled and not otherwise processed after forging, Of iron or nonalloy steel
- 7307.99.3000 Other, Not machined, not tooled and not otherwise processed after forging, Of alloy steel (except stainless steel)
- 7307.99.5015 Other, Of iron or nonalloy steel, Nipples
- 7307.99.5045 Other, Of iron or nonalloy steel
- 7307.99.5060 Other, Of alloy steel (except stainless steel)
7308 Structures (excluding prefabricated buildings of heading…
- 7308.10.0000 Bridges and bridge sections
- 7308.20.0030 Tubular, whether or not tapered, and sectional components thereof
- 7308.20.0035 Tubular wind turbine towers, whether or not tapered, and sectional components thereof
- 7308.20.0090 Towers and lattice masts
- 7308.30.1000 Doors, windows and their frames and thresholds for doors, Of stainless steel
- 7308.30.5015 Doors, windows and their frames and thresholds for doors, Windows and their frames
- 7308.30.5025 Doors, windows and their frames and thresholds for doors, Thresholds for doors
- 7308.30.5050 Doors, windows and their frames and thresholds for doors
- 7308.40.0000 Equipment for scaffolding, shuttering, propping or pit- propping
- 7308.90.3000 Columns, pillars, posts, beams, girders and similar structural units, Not in part of alloy steel
- 7308.90.6000 Columns, pillars, posts, beams, girders and similar structural units
- 7308.90.7000 Other, Steel grating
- 7308.90.9530 Sheet-metal roofing, siding, flooring and roof drainage equipment
- 7308.90.9560 Other, Architectural and ornamental work
- 7308.90.9590 Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
7309 Reservoirs, tanks, vats and similar containers for any…
- 7309.00.0030 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment, Tanks
- 7309.00.0090 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
7310 Tanks, casks, drums, cans, boxes and similar containers,…
- 7310.10.0005 Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.
- 7310.10.0015 Empty steel drums and barrels
- 7310.10.0090 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
- 7310.21.0025 Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods
- 7310.21.0070 Of a capacity of less than 50 liters, Cans which are to be closed by soldering or crimping
- 7310.21.0075 Of a capacity of less than 50 liters, Cans which are to be closed by soldering or crimping
- 7310.29.0020 Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
- 7310.29.0030 Of a capacity of less than 50 liters, Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods
- 7310.29.0055 Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
- 7310.29.0065 Of a capacity of less than 50 liters, Other
7311 Containers for compressed or liquefied gas, of iron or steel
- 7311.00.0030 Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number
- 7311.00.0060 Containers for compressed or liquefied gas, of iron or steel, Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements
- 7311.00.0090 Containers for compressed or liquefied gas, of iron or steel
7312 Stranded wire, ropes, cables, plaited bands, slings and…
- 7312.10.0500 Stranded wire, ropes and cables, Stranded wire, Of stainless steel, Fitted with fittings or made up into articles
- 7312.10.1030 Stranded wire, ropes and cables, Stranded wire, Of stainless steel, Tire cord
- 7312.10.1050 Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5
- 7312.10.1070 Stranded wire, ropes and cables, Stranded wire, Of stainless steel
- 7312.10.2000 Stranded wire, ropes and cables, Stranded wire, Other, Fitted with fittings or made up into articles
- 7312.10.3005 Stranded wire, ropes and cables, Stranded wire, Other, Tire cord
- 7312.10.3010 Covered with textile or other non- metallic material
- 7312.10.3012 Stranded wire, ropes and cables, Stranded wire, Other, For prestressing concrete
- 7312.10.3020 Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5
- 7312.10.3045 Stranded wire, ropes and cables, Stranded wire, Other, Of brass plated wire
- 7312.10.3065 Stranded wire, ropes and cables, Stranded wire, Other, Galvanized, ACSR core strand
- 7312.10.3070 Covered with textile or other nonmetallic material
- 7312.10.3074 Stranded wire, ropes and cables, Stranded wire, Other, Galvanized, Other
- 7312.10.3080 Stranded wire, ropes and cables, Stranded wire, Other
- 7312.10.5000 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Of stainless steel, Fitted with fittings or made up into articles
- 7312.10.6030 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Of stainless steel
- 7312.10.6060 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Of stainless steel
- 7312.10.7000 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Other, Fitted with fittings or made up into articles
- 7312.10.8000 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Other, Of brass plated wire
- 7312.10.9030 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Other, Galvanized
- 7312.10.9060 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Other, Galvanized
- 7312.10.9090 Stranded wire, ropes and cables, Ropes, cables and cordage other than stranded wire, Other
- 7312.90.0000 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated
7313
7314 Cloth (including endless bands), grill, netting and…
- 7314.12.1000 With meshes not finer than 12 wires to the lineal centimeter in warp or filling
- 7314.12.2000 With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling
- 7314.12.3000 Woven cloth, Endless bands for machinery, of stainless steel, With meshes finer than 36 wires to the lineal centimeter in warp or filling, Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, With 94 or more wires to the lineal centimeter
- 7314.12.6000 Woven cloth, Endless bands for machinery, of stainless steel, With meshes finer than 36 wires to the lineal centimeter in warp or filling, Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines
- 7314.12.9000 Woven cloth, Endless bands for machinery, of stainless steel, With meshes finer than 36 wires to the lineal centimeter in warp or filling
- 7314.14.1000 With meshes not finer than 12 wires to the lineal centimeter in warp or filling
- 7314.14.2000 With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling
- 7314.14.3000 Woven cloth, Other woven cloth, of stainless steel, With meshes finer than 36 wires to the lineal centimeter in warp or maximum, Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, With 94 or more wires to the lineal centimeter
- 7314.14.6000 Woven cloth, Other woven cloth, of stainless steel, With meshes finer than 36 wires to the lineal centimeter in warp or maximum, Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines
- 7314.14.9000 Woven cloth, Other woven cloth, of stainless steel, With meshes finer than 36 wires to the lineal centimeter in warp or maximum
- 7314.19.0100 Woven cloth
- 7314.20.0000 Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more
- 7314.31.1000 Wire fencing plated or coated with zinc, whether or not covered with plastic material
- 7314.31.5010 Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire
- 7314.31.5080 Other grill, netting and fencing, welded at the intersection, Plated or coated with zinc
- 7314.39.0000 Other grill, netting and fencing, welded at the intersection
- 7314.41.0030 Other grill, netting and fencing, Plated or coated with zinc, Chain link fencing
- 7314.41.0040 Other grill, netting and fencing, Plated or coated with zinc, Woven wire stucco netting, furred, not reinforced with supplemental horizontal wire
- 7314.41.0045 Other grill, netting and fencing, Plated or coated with zinc, Woven wire stucco netting, furred, not reinforced with supplemental horizontal wire
- 7314.41.0080 Other grill, netting and fencing, Plated or coated with zinc
- 7314.42.0030 Other grill, netting and fencing, Coated with plastics, Chain link fencing
- 7314.42.0060 Other grill, netting and fencing, Coated with plastics
- 7314.49.3000 Other grill, netting and fencing, Not cut to shape
- 7314.49.6000 Other grill, netting and fencing, Cut to shape
- 7314.50.0000 Expanded metal
7315 Chain and parts thereof, of iron or steel
- 7315.11.0005 Articulated link chain and parts thereof, Roller chain, For motor vehicles
- 7315.11.0010 Articulated link chain and parts thereof, Roller chain, Other, Of not over 50 mm pitch and containing more than 3 parts per pitch, Bicycle chains
- 7315.11.0045 Articulated link chain and parts thereof, Roller chain, Other, Of not over 50 mm pitch and containing more than 3 parts per pitch
- 7315.11.0060 Articulated link chain and parts thereof, Roller chain, Other
- 7315.12.0020 Articulated link chain and parts thereof, Other chain
- 7315.12.0040 Articulated link chain and parts thereof, Other chain, Other, Welded steel chain
- 7315.12.0060 Articulated link chain and parts thereof, Other chain, Other, Cast and combination chain
- 7315.12.0080 Articulated link chain and parts thereof, Other chain, Other
- 7315.19.0000 Articulated link chain and parts thereof, Parts
- 7315.20.1000 Skid chain
- 7315.20.5000 Skid chain
- 7315.81.0000 Other chain, Stud link
- 7315.82.1000 Other chain, Other, welded link, Of alloy steel
- 7315.82.3000 Other chain, Other, welded link, Of alloy steel
- 7315.82.5000 Other chain, Other, welded link, Of iron or nonalloy steel
- 7315.82.7000 Other chain, Other, welded link, Of iron or nonalloy steel
- 7315.89.1000 Other chain, With links of essentially round cross sections
- 7315.89.3000 Other chain, With links of essentially round cross sections
- 7315.89.5000 Other chain
- 7315.90.0000 Other parts
7316
7317 Nails, tacks, drawing pins, corrugated nails, staples…
- 7317.00.1000 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Thumb tacks
- 7317.00.2000 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, suitable for use in powder-actuated handtools, Not threaded
- 7317.00.3000 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, suitable for use in powder-actuated handtools, Threaded
- 7317.00.5501 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails
- 7317.00.5502 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails, Other, Assembled in a wire coil, Galvanized
- 7317.00.5503 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails, Other, Assembled in a wire coil
- 7317.00.5505 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails, Other, Assembled in a plastic strip, Galvanized
- 7317.00.5507 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails, Other, Assembled in a plastic strip
- 7317.00.5508 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails, Other, Assembled in a paper strip
- 7317.00.5511 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails, Other, Assembled in a wire strip
- 7317.00.5518 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Collated nails, Other
- 7317.00.5519 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other
- 7317.00.5520 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Smooth shank, Not coated, plated or painted
- 7317.00.5530 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Smooth shank, Coated, plated or painted, Galvanized
- 7317.00.5540 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Smooth shank, Coated, plated or painted, Vinyl, resin or cement coated
- 7317.00.5550 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Smooth shank, Coated, plated or painted
- 7317.00.5560 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Not coated, plated or painted
- 7317.00.5570 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Coated, plated or painted, Galvanized
- 7317.00.5580 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Coated, plated or painted, Vinyl, resin or cement coated
- 7317.00.5590 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Made of round wire, Other, Coated, plated or painted
- 7317.00.6530 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction, Cut
- 7317.00.6560 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of one piece construction
- 7317.00.7500 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper, Other, Of two or more pieces
7318 Screws, bolts, nuts, coach screws, screw hooks, rivets,…
- 7318.11.0000 Threaded articles, Coach screws
- 7318.12.0000 Threaded articles, Other wood screws
- 7318.13.0030 Threaded articles, Screw hooks and screw rings
- 7318.13.0060 Threaded articles, Screw hooks and screw rings
- 7318.14.1030 Threaded articles, Self-tapping screws, Of stainless steel
- 7318.14.1060 Threaded articles, Self-tapping screws
- 7318.14.5020 Threaded articles, Self-tapping screws, Of stainless steel
- 7318.14.5080 Threaded articles, Self-tapping screws
- 7318.15.2010 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment
- 7318.15.2020 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Track bolts
- 7318.15.2030 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Structural bolts
- 7318.15.2041 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Bent bolts, Right-angle anchor bolts
- 7318.15.2046 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Bent bolts
- 7318.15.2051 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Other, With round heads, Of stainless steel
- 7318.15.2055 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Other, With round heads
- 7318.15.2061 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Other, With hexagonal heads, Of stainless steel
- 7318.15.2065 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Other, With hexagonal heads
- 7318.15.2091 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Other, Of stainless steel
- 7318.15.2095 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Bolts and bolts and their nuts or washers entered or exported in the same shipment, Having shanks or threads with a diameter of 6 mm or more, Other
- 7318.15.4000 Threaded articles, Other screws and bolts, whether or not with their nuts or washers
- 7318.15.5030 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Studs, Of stainless steel
- 7318.15.5051 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Studs, Other, Continuously threaded rod, Of alloy steel
- 7318.15.5056 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Studs, Other, Continuously threaded rod
- 7318.15.5090 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Studs, Other
- 7318.15.6010 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, Socket screws, Of stainless steel
- 7318.15.6040 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, Socket screws
- 7318.15.6070 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, Of stainless steel
- 7318.15.6080 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other
- 7318.15.8020 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, Set screws
- 7318.15.8030 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, Socket screws, Of stainless steel
- 7318.15.8045 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, Socket screws
- 7318.15.8055 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, With hexagonal heads, Of stainless steel
- 7318.15.8066 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, With hexagonal heads, Other, Cap screws
- 7318.15.8069 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, With hexagonal heads, Other
- 7318.15.8082 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other, Of stainless steel
- 7318.15.8085 Threaded articles, Other screws and bolts, whether or not with their nuts or washers, Other
- 7318.16.0015 Threaded articles, Nuts, Lugnuts, Non-locking chrome-plated
- 7318.16.0030 Threaded articles, Nuts, Lugnuts, Locking
- 7318.16.0045 Threaded articles, Nuts, Lugnuts
- 7318.16.0060 Threaded articles, Nuts, Other, Of stainless steel
- 7318.16.0085 Threaded articles, Nuts, Other
- 7318.19.0000 Threaded articles
- 7318.21.0030 Non-threaded articles, Spring washers and other lock washers, Helical spring lock washers
- 7318.21.0090 Non-threaded articles, Spring washers and other lock washers
- 7318.22.0000 Non-threaded articles, Other washers
- 7318.23.0000 Non-threaded articles, Rivets
- 7318.24.0000 Non-threaded articles, Cotters and cotter pins
- 7318.29.0000 Non-threaded articles
7319 Sewing needles, knitting needles, bodkins, crochet…
- 7319.40.2010 Safety pins and other pins, Safety pins, On cards
- 7319.40.2050 Safety pins and other pins, Safety pins
- 7319.40.3000 Safety pins and other pins, Dressmakers' or common pins
- 7319.40.5010 Safety pins and other pins, Push pins
- 7319.40.5050 Safety pins and other pins
- 7319.90.1000 Sewing, darning or embroidery needles
- 7319.90.9000 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included
7320 Springs and leaves for springs, of iron or steel
- 7320.10.3000 Leaf springs and leaves therefor, Suitable for motor vehicle suspension
- 7320.10.6015 Leaf springs and leaves therefor, Suitable for motor vehicle suspension
- 7320.10.6060 Leaf springs and leaves therefor, Suitable for motor vehicle suspension
- 7320.10.9015 Leaf springs and leaves therefor
- 7320.10.9060 Leaf springs and leaves therefor
- 7320.20.1000 Helical springs, Suitable for motor-vehicle suspension
- 7320.20.5010 Suitable for use in mattress supports and mattresses of heading 9404
- 7320.20.5020 Helical springs, Helical springs, of wire having a cross-sectional dimension of less than 5.1 mm
- 7320.20.5045 Helical springs
- 7320.20.5060 Helical springs
- 7320.90.1000 Hairsprings
- 7320.90.5010 Suitable for use in mattress supports and mattresses of heading 9404
- 7320.90.5020 Of wire
- 7320.90.5060 Springs and leaves for springs, of iron or steel
7321 Stoves, ranges, grates, cookers (including those with…
- 7321.11.1030 Cooking appliances and plate warmers, For gas fuel or for both gas and other fuels, Portable, Stoves or ranges
- 7321.11.1060 Cooking appliances and plate warmers, For gas fuel or for both gas and other fuels, Portable
- 7321.11.3010 Cooking appliances and plate warmers, For gas fuel or for both gas and other fuels, Other, Stoves or ranges
- 7321.11.3020 Cooking appliances and plate warmers, For gas fuel or for both gas and other fuels, Other, Stoves or ranges
- 7321.11.3050 Cooking appliances and plate warmers, For gas fuel or for both gas and other fuels, Other, Stoves or ranges
- 7321.11.6000 Cooking appliances and plate warmers, For gas fuel or for both gas and other fuels, Other
- 7321.12.0000 Cooking appliances and plate warmers, For liquid fuel
- 7321.19.0020 Cooking appliances and plate warmers, Other, including appliances for solid fuel, Portable, Hibachis
- 7321.19.0040 Cooking appliances and plate warmers, Other, including appliances for solid fuel, Portable
- 7321.19.0060 Cooking appliances and plate warmers, Other, including appliances for solid fuel, Other, Of cast iron
- 7321.19.0080 Cooking appliances and plate warmers, Other, including appliances for solid fuel, Other
- 7321.81.1000 Other appliances, For gas fuel or for both gas and other fuels, Portable
- 7321.81.5000 Other appliances, For gas fuel or for both gas and other fuels
- 7321.82.1000 Other appliances, For liquid fuel, Portable
- 7321.82.5000 Other appliances, For liquid fuel
- 7321.89.0010 Other appliances, Other, including appliances for solid fuel, Fireplace grates of cast iron
- 7321.89.0050 Other appliances, Other, including appliances for solid fuel
- 7321.90.1000 Parts of articles in subheading 7321.11.30
- 7321.90.2000 Top surface panels with or without burners or controls
- 7321.90.4000 Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation
- 7321.90.5000 Parts of articles in subheading 7321.11.30
- 7321.90.6040 Parts of cooking appliances and plate warmers
- 7321.90.6060 Parts of cooking appliances and plate warmers
- 7321.90.6090 Parts of stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel
7322 Radiators for central heating, not electrically heated,…
- 7322.11.0000 Radiators and parts thereof, Of cast iron
- 7322.19.0000 Radiators and parts thereof
- 7322.90.0015 Air heaters, not electrically heated, incorporating a motor-driven fan or blower
- 7322.90.0030 Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower
- 7322.90.0045 Other, including parts, Parts of air heaters and hot air distributors
7323 Table, kitchen or other household articles and parts…
- 7323.10.0000 Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
- 7323.91.1000 Other, Of cast iron, not enameled, Coated or plated with precious metal
- 7323.91.5020 Bakeware (cookware not suitable for stove top use)
- 7323.91.5040 Other, Of cast iron, not enameled
- 7323.92.0020 Bakeware (cookware not suitable for stove top use)
- 7323.92.0040 Other, Of cast iron, enameled
- 7323.93.0015 Other, Of stainless steel, Cooking and kitchen ware, Teakettles
- 7323.93.0035 Bakeware (cookware not suitable for stove top use)
- 7323.93.0045 Other, Of stainless steel, Cooking and kitchen ware, Other, Cooking ware
- 7323.93.0060 Other, Of stainless steel, Cooking and kitchen ware, Other, Kitchen ware
- 7323.93.0080 Other, Of stainless steel
- 7323.94.0010 Other, Of iron (other than cast iron) or steel, enameled, Cooking and kitchen ware, Of steel, Teakettles
- 7323.94.0021 Bakeware (cookware not suitable for stove top use)
- 7323.94.0026 Other, Of iron (other than cast iron) or steel, enameled, Cooking and kitchen ware, Of steel, Other, Cooking ware
- 7323.94.0030 Other, Of iron (other than cast iron) or steel, enameled, Cooking and kitchen ware, Of steel, Other, Kitchen ware
- 7323.94.0040 Other, Of iron (other than cast iron) or steel, enameled, Cooking and kitchen ware
- 7323.94.0080 Other, Of iron (other than cast iron) or steel, enameled
- 7323.99.1000 Other, Coated or plated with precious metal, Coated or plated with silver
- 7323.99.3000 Other, Coated or plated with precious metal
- 7323.99.5030 Kitchen or tableware suitable for food or drink contact
- 7323.99.5060 Other, Not coated or plated with precious metal, Of tinplate
- 7323.99.7000 Other, Not coated or plated with precious metal, Other, Cookingware
- 7323.99.9030 Kitchen or tableware suitable for food or drink contact
- 7323.99.9040 Other, Not coated or plated with precious metal, Other, Gates for confining children or pets
- 7323.99.9080 Other, Not coated or plated with precious metal, Other
7324 Sanitary ware and parts thereof, of iron or steel
- 7324.10.0010 Stainless steel sinks with one or more drawn bowls (basins)
- 7324.10.0050 Sinks and wash basins, of stainless steel
- 7324.21.1000 Baths, Of cast iron, whether or not enamelled, Coated or plated with precious metal
- 7324.21.5000 Baths, Of cast iron, whether or not enamelled
- 7324.29.0000 Baths
- 7324.90.0000 Other, including parts
7325 Other cast articles of iron or steel
- 7325.10.0010 Of nonmalleable cast iron, Manhole covers, rings and frames
- 7325.10.0020 Of nonmalleable cast iron, Catch basins, grates and frames
- 7325.10.0025 Of nonmalleable cast iron, Cleanout covers and frames
- 7325.10.0030 Of nonmalleable cast iron, Valve and service boxes
- 7325.10.0035 Of nonmalleable cast iron, Meter boxes
- 7325.10.0080 Of nonmalleable cast iron
- 7325.91.0000 Other, Grinding balls and similar articles for mills
- 7325.99.1000 Other, Of cast iron
- 7325.99.5000 Other cast articles of iron or steel
7326 Other articles of iron or steel
- 7326.11.0000 Forged or stamped, but not further worked, Grinding balls and similar articles for mills
- 7326.19.0010 Forged or stamped, but not further worked, Forged
- 7326.19.0080 Forged or stamped, but not further worked
- 7326.20.0010 Articles of iron or steel wire, Belts and belting
- 7326.20.0020 Articles of iron or steel wire, Garment hangers
- 7326.20.0030 Sod staples, U staples, irrigation staples, ground staples, and ground pins
- 7326.20.0040 Articles of iron or steel wire, Double loop bar ties and double loop wire ties
- 7326.20.0055 Articles of iron or steel wire, Paint roller frames
- 7326.20.0090 Articles of iron or steel wire
- 7326.90.1000 Of tinplate
- 7326.90.2500 Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length
- 7326.90.3500 Containers of a kind normally carried on the person, in the pocket or in the handbag
- 7326.90.4500 Other, Horse and mule shoes
- 7326.90.6000 Other, Coated or plated with precious metal
- 7326.90.8605 Other, Rods for electrical grounding
- 7326.90.8610 Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material
- 7326.90.8630 Other, Hangers and similar supports for tubes and pipes
- 7326.90.8635 Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates
- 7326.90.8645 Other, Barbed tape
- 7326.90.8660 Other, Ladders
- 7326.90.8675 Paint roller frames (other than of iron or steel wire)
- 7326.90.8676 Metal handles for brooms, mops, paint applicators and similar products
- 7326.90.8677 Other, Burial caskets
- 7326.90.8688 Other articles of iron or steel
No tariff lines match your filter
Try a 4-digit heading, or a different product term.