HTS Chapter 73
573 tariff lines in this chapter.
- 7301.10.0000 — Sheet piling
- 7301.20.1000 — Of iron or nonalloy steel
- 7301.20.5000 — Of alloy steel
- 7302.10.1010 — Standard tee rails over 30 kg per meter
- 7302.10.1015 — Over 30 kg per meter
- 7302.10.1025 — Other
- 7302.10.1035 — Standard tee rails over 30 kg per meter
- 7302.10.1045 — Over 30 kg per meter
- 7302.10.1055 — Other
- 7302.10.1065 — Railway rails for rerolling
- 7302.10.1075 — Other
- 7302.10.5020 — New
- 7302.10.5040 — Railway rails for rerolling
- 7302.10.5060 — Other
- 7302.30.0000 — Switch blades, crossing frogs, point rods and other crossing pieces
- 7302.40.0000 — Fish-plates and sole plates
- 7302.90.1000 — Sleepers (cross-ties)
- 7302.90.9000 — Other
- 7303.00.0030 — Soil pipe
- 7303.00.0060 — Pressure pipe with an inside diameter of less than 356 mm
- 7303.00.0090 — Other
- 7304.11.0020 — Having an outside diameter not exceeding 114.3 mm
- 7304.11.0050 — Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
- 7304.11.0080 — Having an outside diameter exceeding 406.4 mm
- 7304.19.1020 — Having an outside diameter not exceeding 114.3 mm
- 7304.19.1030 — Having an outside diameter exceeding 114.3 mm but less than 215.9 mm
- 7304.19.1045 — Having a wall thickness less than 12.7 mm
- 7304.19.1060 — Having a wall thickness of 12.7 mm or more
- 7304.19.1080 — Having an outside diameter exceeding 406.4 mm
- 7304.19.5020 — Having an outside diameter not exceeding 114.3 mm
- 7304.19.5050 — Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
- 7304.19.5080 — Having an outside diameter exceeding 406.4 mm
- 7304.22.0030 — Having a wall thickness not exceeding 9.5 mm
- 7304.22.0045 — Having a wall thickness exceeding 9.5 mm
- 7304.22.0060 — Having an outside diameter exceeding 168.3 mm
- 7304.23.3000 — Of iron or nonalloy steel
- 7304.23.6030 — Having a wall thickness not exceeding 9.5 mm
- 7304.23.6045 — Having a wall thickness exceeding 9.5 mm
- 7304.23.6060 — Having an outside diameter exceeding 168.3 mm
- 7304.24.3010 — Having a wall thickness less than 12.7 mm
- 7304.24.3020 — Having a wall thickness of 12.7 mm or more
- 7304.24.3030 — Having a wall thickness less than 12.7 mm
- 7304.24.3040 — Having a wall thickness of 12.7 mm or more
- 7304.24.3045 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.24.3080 — Having an outside diameter exceeding 406.4 mm
- 7304.24.4010 — Having a wall thickness less than 12.7 mm
- 7304.24.4020 — Having a wall thickness of 12.7 mm or more
- 7304.24.4030 — Having a wall thickness less than 12.7 mm
- 7304.24.4040 — Having a wall thickness of 12.7 mm or more
- 7304.24.4050 — Having a wall thickness less than 12.7 mm
- 7304.24.4060 — Having a wall thickness of 12.7 mm or more
- 7304.24.4080 — Having an outside diameter exceeding 406.4 mm
- 7304.24.6015 — Having a wall thickness not exceeding 9.5 mm
- 7304.24.6030 — Having a wall thickness exceeding 9.5 mm
- 7304.24.6045 — Having an outside diameter exceeding 114.3 mm but less than 215.9 mm
- 7304.24.6060 — Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm
- 7304.24.6075 — Having an outside diameter exceeding 406.4 mm
- 7304.29.1010 — Having a wall thickness less than 12.7 mm
- 7304.29.1020 — Having a wall thickness of 12.7 mm or more
- 7304.29.1030 — Having a wall thickness less than 12.7 mm
- 7304.29.1040 — Having a wall thickness of 12.7 mm or more
- 7304.29.1050 — Having a wall thickness less than 12.7 mm
- 7304.29.1060 — Having a wall thickness of 12.7 mm or more
- 7304.29.1080 — Having an outside diameter exceeding 406.4 mm
- 7304.29.2010 — Having a wall thickness less than 12.7 mm
- 7304.29.2020 — Having a wall thickness of 12.7 mm or more
- 7304.29.2030 — Having a wall thickness less than 12.7 mm
- 7304.29.2040 — Having a wall thickness of 12.7 mm or more
- 7304.29.2050 — Having a wall thickness less than 12.7 mm
- 7304.29.2060 — Having a wall thickness of 12.7 mm or more
- 7304.29.2080 — Having an outside diameter exceeding 406.4 mm
- 7304.29.3110 — Having a wall thickness less than 12.7 mm
- 7304.29.3120 — Having a wall thickness of 12.7 mm or more
- 7304.29.3130 — Having a wall thickness less than 12.7 mm
- 7304.29.3140 — Having a wall thickness of 12.7 mm or more
- 7304.29.3150 — Having a wall thickness less than 12.7 mm
- 7304.29.3160 — Having a wall thickness of 12.7 mm or more
- 7304.29.3180 — Having an outside diameter exceeding 406.4 mm
- 7304.29.4110 — Having a wall thickness less than 12.7 mm
- 7304.29.4120 — Having a wall thickness of 12.7 mm or more
- 7304.29.4130 — Having a wall thickness less than 12.7 mm
- 7304.29.4140 — Having a wall thickness of 12.7 mm or more
- 7304.29.4150 — Having a wall thickness less than 12.7 mm
- 7304.29.4160 — Having a wall thickness of 12.7 mm or more
- 7304.29.4180 — Having an outside diameter exceeding 406.4 mm
- 7304.29.5015 — Having a wall thickness not exceeding 9.5 mm
- 7304.29.5030 — Having a wall thickness exceeding 9.5 mm
- 7304.29.5045 — Having an outside diameter exceeding 114.3 mm but less than 215.9 mm
- 7304.29.5060 — Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm
- 7304.29.5075 — Having an outside diameter exceeding 406.4 mm
- 7304.29.6115 — Having a wall thickness not exceeding 9.5 mm
- 7304.29.6130 — Having a wall thickness exceeding 9.5 mm
- 7304.29.6145 — Having an outside diameter exceeding 114.3 mm but less than 215.9 mm
- 7304.29.6160 — Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm
- 7304.29.6175 — Having an outside diameter exceeding 406.4 mm
- 7304.31.3000 — Hollow bars
- 7304.31.6010 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.31.6050 — Other
- 7304.39.0002 — Having an outside diameter less than 38.1 mm
- 7304.39.0004 — Having an outside diameter of 38.1 mm or more but less than 190.5 mm
- 7304.39.0006 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.39.0008 — Having an outside diameter exceeding 285.8 mm
- 7304.39.0016 — Galvanized, having an outside diameter not exceeding 114.3 mm
- 7304.39.0020 — Having an outside diameter less than 38.1 mm
- 7304.39.0024 — Having a wall thickness less than 6.4 mm
- 7304.39.0028 — Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm
- 7304.39.0032 — Having a wall thickness exceeding 12.7 mm
- 7304.39.0036 — Having a wall thickness less than 12.7 mm
- 7304.39.0040 — Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.39.0044 — Having a wall thickness of 19 mm or more
- 7304.39.0048 — Having a wall thickness less than 12.7 mm
- 7304.39.0052 — Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.39.0056 — Having a wall thickness of 19 mm or more
- 7304.39.0062 — Having a wall thickness less than 12.7 mm
- 7304.39.0068 — Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.39.0072 — Having a wall thickness of 19 mm or more
- 7304.39.0076 — Having a wall thickness less than 19 mm
- 7304.39.0080 — Having a wall thickness of 19 mm or more
- 7304.41.3005 — Of high-nickel alloy steel
- 7304.41.3015 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.41.3045 — Other
- 7304.41.6005 — Of high-nickel alloy steel
- 7304.41.6015 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.41.6045 — Other
- 7304.49.0005 — Of high-nickel alloy steel
- 7304.49.0015 — Hollow bars
- 7304.49.0045 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
- 7304.49.0060 — Other
- 7304.51.1000 — Suitable for use in the manufacture of ball or roller bearings
- 7304.51.5005 — Of high-nickel alloy steel
- 7304.51.5015 — Of heat-resisting steel
- 7304.51.5045 — Other
- 7304.51.5060 — Other
- 7304.59.1000 — Suitable for use in the manufacture of ball or roller bearings
- 7304.59.2030 — Of heat-resisting steel
- 7304.59.2040 — Having an outside diameter less than 38.1 mm
- 7304.59.2045 — Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.59.2055 — Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.59.2060 — Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.59.2070 — Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.59.2080 — Having an outside diameter exceeding 406.4 mm
- 7304.59.6000 — Of heat-resisting steel
- 7304.59.8010 — Having an outside diameter less than 38.1 mm
- 7304.59.8015 — Having a wall thickness less than 6.4 mm
- 7304.59.8020 — Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm
- 7304.59.8025 — Having a wall thickness exceeding 12.7 mm
- 7304.59.8030 — Having a wall thickness less than 12.7 mm
- 7304.59.8035 — Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.59.8040 — Having a wall thickness of 19 mm or more
- 7304.59.8045 — Having a wall thickness less than 12.7 mm
- 7304.59.8050 — Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.59.8055 — Having a wall thickness of 19 mm or more
- 7304.59.8060 — Having a wall thickness less than 12.7 mm
- 7304.59.8065 — Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.59.8070 — Having a wall thickness of 19 mm or more
- 7304.59.8080 — Having an outside diameter exceeding 406.4 mm
- 7304.90.1000 — Of iron or nonalloy steel
- 7304.90.3000 — Of alloy steel
- 7304.90.5000 — Of iron or nonalloy steel
- 7304.90.7000 — Of alloy steel
- 7305.11.1030 — With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm
- 7305.11.1060 — With an external diameter exceeding 609.6 mm
- 7305.11.5000 — Of alloy steel
- 7305.12.1030 — With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm
- 7305.12.1060 — With an external diameter exceeding 609.6 mm
- 7305.12.5000 — Of alloy steel
- 7305.19.1030 — With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm
- 7305.19.1060 — With an external diameter exceeding 609.6 mm
- 7305.19.5000 — Of alloy steel
- 7305.20.2000 — Threaded or coupled
- 7305.20.4000 — Other
- 7305.20.6000 — Threaded or coupled
- 7305.20.8000 — Other
- 7305.31.2000 — Tapered pipes and tubes of steel principally used as parts of illuminating articles
- 7305.31.4000 — Of iron or nonalloy steel
- 7305.31.6010 — Of stainless steel
- 7305.31.6090 — Other
- 7305.39.1000 — Of iron or nonalloy steel
- 7305.39.5000 — Of alloy steel
- 7305.90.1000 — Of iron or nonalloy steel
- 7305.90.5000 — Of alloy steel
- 7306.11.0010 — With an outside diameter not exceeding 114.3 mm
- 7306.11.0050 — With an outside diameter exceeding 114.3 mm
- 7306.19.1010 — With an outside diameter not exceeding 114.3 mm
- 7306.19.1050 — With an outside diameter exceeding 114.3 mm
- 7306.19.5110 — With an outside diameter not exceeding 114.3 mm
- 7306.19.5150 — With an outside diameter exceeding 114.3 mm
- 7306.21.3000 — Threaded or coupled
- 7306.21.4000 — Other
- 7306.21.8010 — Imported with coupling
- 7306.21.8050 — Other
- 7306.29.1030 — Imported with coupling
- 7306.29.1090 — Other
- 7306.29.2000 — Other
- 7306.29.3100 — Threaded or coupled
- 7306.29.4100 — Other
- 7306.29.6010 — Imported with coupling
- 7306.29.6050 — Other
- 7306.29.8110 — Imported with coupling
- 7306.29.8150 — Other
- 7306.30.1010 — Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
- 7306.30.1090 — Other
- 7306.30.3000 — Tapered steel pipes and tubes principally used as parts of illuminating articles
- 7306.30.5010 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn
- 7306.30.5015 — Other, cold-drawn
- 7306.30.5020 — Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm
- 7306.30.5026 — With an outside diameter not exceeding 50.8 mm
- 7306.30.5027 — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
- 7306.30.5028 — Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
- 7306.30.5031 — With an outside diameter not exceeding 50.8 mm
- 7306.30.5033 — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
- 7306.30.5035 — Tube and pipe hollows for redrawing
- 7306.30.5041 — With an outside diameter not exceeding 50.8 mm
- 7306.30.5043 — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
- 7306.30.5056 — With an outside diameter not exceeding 50.8 mm
- 7306.30.5057 — With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm
- 7306.30.5085 — Galvanized
- 7306.30.5090 — Other
- 7306.40.1010 — Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
- 7306.40.1015 — Other
- 7306.40.1090 — Other
- 7306.40.5005 — Of high-nickel alloy steel
- 7306.40.5015 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
- 7306.40.5040 — Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7306.40.5042 — Containing less than 15 percent by weight of chromium
- 7306.40.5044 — Other
- 7306.40.5062 — Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
- 7306.40.5064 — Other
- 7306.40.5080 — Other
- 7306.40.5085 — Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7306.40.5090 — Other
- 7306.50.1000 — Having a wall thickness of less than 1.65 mm
- 7306.50.3000 — Tapered pipes and tubes of steel principally used as parts of illuminating articles
- 7306.50.5010 — Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
- 7306.50.5030 — Other, cold-drawn or cold-rolled (cold- reduced)
- 7306.50.5050 — With an outside diameter not exceeding 114.3 mm
- 7306.50.5070 — With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
- 7306.61.1000 — Of iron or nonalloy steel
- 7306.61.3000 — Of alloy steel
- 7306.61.5000 — Of iron or nonalloy steel
- 7306.61.7030 — Of stainless steel
- 7306.61.7060 — Other
- 7306.69.1000 — Of iron or nonalloy steel
- 7306.69.3000 — Of alloy steel
- 7306.69.5000 — Of iron or nonalloy steel
- 7306.69.7030 — Of stainless steel
- 7306.69.7060 — Other
- 7306.90.1000 — Of iron or nonalloy steel
- 7306.90.5000 — Of alloy steel
- 7307.11.0030 — For threaded pipe
- 7307.11.0045 — For cast-iron soil pipe
- 7307.11.0060 — Other
- 7307.19.3040 — Grooved-end fittings (including grooved couplings)
- 7307.19.3060 — Threaded
- 7307.19.3070 — With mechanical, push-on (rubber compression) or flanged joints attached
- 7307.19.3085 — Other
- 7307.19.9030 — Unions
- 7307.19.9040 — Grooved-end fittings (including grooved couplings)
- 7307.19.9060 — Threaded
- 7307.19.9080 — Other
- 7307.21.1000 — Not machined, not tooled and not otherwise processed after forging
- 7307.21.5000 — Other
- 7307.22.1000 — Sleeves (couplings)
- 7307.22.5000 — Other
- 7307.23.0030 — Not machined, not tooled and not otherwise processed after forming
- 7307.23.0090 — Other
- 7307.29.0030 — Nipples
- 7307.29.0090 — Other
- 7307.91.1000 — Of iron or nonalloy steel
- 7307.91.3000 — Of alloy steel (except stainless steel)
- 7307.91.5010 — Of iron or nonalloy steel
- 7307.91.5030 — Of alloy steel (except stainless steel)
- 7307.91.5050 — Of iron or nonalloy steel
- 7307.91.5070 — Of alloy steel (except stainless steel)
- 7307.92.3010 — Of iron or nonalloy steel
- 7307.92.3030 — Of alloy steel (except stainless steel)
- 7307.92.9000 — Other
- 7307.93.3010 — Not machined, not tooled and not otherwise processed after forging
- 7307.93.3040 — Other
- 7307.93.6000 — Of alloy steel (except stainless steel)
- 7307.93.9010 — Not machined, not tooled and not otherwise processed after forging
- 7307.93.9040 — Other
- 7307.93.9060 — Of alloy steel (except stainless steel)
- 7307.99.1000 — Of iron or nonalloy steel
- 7307.99.3000 — Of alloy steel (except stainless steel)
- 7307.99.5015 — Nipples
- 7307.99.5045 — Other
- 7307.99.5060 — Of alloy steel (except stainless steel)
- 7308.10.0000 — Bridges and bridge sections
- 7308.20.0030 — Tubular, whether or not tapered, and sectional components thereof
- 7308.20.0035 — Tubular wind turbine towers, whether or not tapered, and sectional components thereof
- 7308.20.0090 — Other
- 7308.30.1000 — Of stainless steel
- 7308.30.5015 — Windows and their frames
- 7308.30.5025 — Thresholds for doors
- 7308.30.5050 — Other
- 7308.40.0000 — Equipment for scaffolding, shuttering, propping or pit- propping
- 7308.90.3000 — Not in part of alloy steel
- 7308.90.6000 — Other
- 7308.90.7000 — Steel grating
- 7308.90.9530 — Sheet-metal roofing, siding, flooring and roof drainage equipment
- 7308.90.9560 — Architectural and ornamental work
- 7308.90.9590 — Other
- 7309.00.0030 — Tanks
- 7309.00.0090 — Other
- 7310.10.0005 — Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.
- 7310.10.0015 — Empty steel drums and barrels
- 7310.10.0090 — Other
- 7310.21.0025 — Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods
- 7310.21.0070 — Containers of a circular cross section, of a capacity not exceeding 11.4 liters, of a kind used for aerosols
- 7310.21.0075 — Other
- 7310.29.0020 — Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
- 7310.29.0030 — Other
- 7310.29.0055 — Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
- 7310.29.0065 — Other
- 7311.00.0030 — Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number
- 7311.00.0060 — Other
- 7311.00.0090 — Other
- 7312.10.0500 — Fitted with fittings or made up into articles
- 7312.10.1030 — Tire cord
- 7312.10.1050 — Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5
- 7312.10.1070 — Other
- 7312.10.2000 — Fitted with fittings or made up into articles
- 7312.10.3005 — Tire cord
- 7312.10.3010 — Covered with textile or other non- metallic material
- 7312.10.3012 — Other
- 7312.10.3020 — Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5
- 7312.10.3045 — Of brass plated wire
- 7312.10.3065 — ACSR core strand
- 7312.10.3070 — Covered with textile or other nonmetallic material
- 7312.10.3074 — Other
- 7312.10.3080 — Other
- 7312.10.5000 — Fitted with fittings or made up into articles
- 7312.10.6030 — With a diameter not exceeding 9.5 mm
- 7312.10.6060 — Other
- 7312.10.7000 — Fitted with fittings or made up into articles
- 7312.10.8000 — Of brass plated wire
- 7312.10.9030 — With a diameter not exceeding 9.5 mm
- 7312.10.9060 — With a diameter exceeding 9.5 mm
- 7312.10.9090 — Other
- 7312.90.0000 — Other
- 7313.00.0000 — Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
- 7314.12.1000 — With meshes not finer than 12 wires to the lineal centimeter in warp or filling
- 7314.12.2000 — With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling
- 7314.12.3000 — With 94 or more wires to the lineal centimeter
- 7314.12.6000 — Other
- 7314.12.9000 — Other
- 7314.14.1000 — With meshes not finer than 12 wires to the lineal centimeter in warp or filling
- 7314.14.2000 — With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling
- 7314.14.3000 — With 94 or more wires to the lineal centimeter
- 7314.14.6000 — Other
- 7314.14.9000 — Other
- 7314.19.0100 — Other
- 7314.20.0000 — Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more
- 7314.31.1000 — Wire fencing plated or coated with zinc, whether or not covered with plastic material
- 7314.31.5010 — Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire
- 7314.31.5080 — Other
- 7314.39.0000 — Other
- 7314.41.0030 — Chain link fencing
- 7314.41.0040 — Of wire with maximum cross- sectional dimension of 1 mm
- 7314.41.0045 — Other
- 7314.41.0080 — Other
- 7314.42.0030 — Chain link fencing
- 7314.42.0060 — Other
- 7314.49.3000 — Not cut to shape
- 7314.49.6000 — Cut to shape
- 7314.50.0000 — Expanded metal
- 7315.11.0005 — For motor vehicles
- 7315.11.0010 — Bicycle chains
- 7315.11.0045 — Other
- 7315.11.0060 — Other
- 7315.12.0020 — Of not over 50 mm pitch and containing more than 3 parts per pitch
- 7315.12.0040 — Welded steel chain
- 7315.12.0060 — Cast and combination chain
- 7315.12.0080 — Other
- 7315.19.0000 — Parts
- 7315.20.1000 — Not over 8 mm in diameter
- 7315.20.5000 — Over 8 mm in diameter
- 7315.81.0000 — Stud link
- 7315.82.1000 — Not over 10 mm in diameter
- 7315.82.3000 — Over 10 mm in diameter
- 7315.82.5000 — Not over 10 mm in diameter
- 7315.82.7000 — Over 10 mm in diameter
- 7315.89.1000 — Not over 8 mm in diameter
- 7315.89.3000 — Over 8 mm in diameter
- 7315.89.5000 — Other
- 7315.90.0000 — Other parts
- 7316.00.0000 — Anchors, grapnels and parts thereof, of iron or steel
- 7317.00.1000 — Thumb tacks
- 7317.00.2000 — Not threaded
- 7317.00.3000 — Threaded
- 7317.00.5501 — Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized
- 7317.00.5502 — Galvanized
- 7317.00.5503 — Other
- 7317.00.5505 — Galvanized
- 7317.00.5507 — Other
- 7317.00.5508 — Assembled in a paper strip
- 7317.00.5511 — Assembled in a wire strip
- 7317.00.5518 — Other
- 7317.00.5519 — With a length of less than 25.4 mm and with a diameter of less than 1.65 mm
- 7317.00.5520 — Not coated, plated or painted
- 7317.00.5530 — Galvanized
- 7317.00.5540 — Vinyl, resin or cement coated
- 7317.00.5550 — Other
- 7317.00.5560 — Not coated, plated or painted
- 7317.00.5570 — Galvanized
- 7317.00.5580 — Vinyl, resin or cement coated
- 7317.00.5590 — Other
- 7317.00.6530 — Cut
- 7317.00.6560 — Other
- 7317.00.7500 — Of two or more pieces
- 7318.11.0000 — Coach screws
- 7318.12.0000 — Other wood screws
- 7318.13.0030 — Having shanks or threads with a diameter of less than 6 mm
- 7318.13.0060 — Having shanks or threads with a diameter of 6 mm or more
- 7318.14.1030 — Of stainless steel
- 7318.14.1060 — Other
- 7318.14.5020 — Of stainless steel
- 7318.14.5080 — Other
- 7318.15.2010 — Having shanks or threads with a diameter of less than 6 mm
- 7318.15.2020 — Track bolts
- 7318.15.2030 — Structural bolts
- 7318.15.2041 — Right-angle anchor bolts
- 7318.15.2046 — Other
- 7318.15.2051 — Of stainless steel
- 7318.15.2055 — Other
- 7318.15.2061 — Of stainless steel
- 7318.15.2065 — Other
- 7318.15.2091 — Of stainless steel
- 7318.15.2095 — Other
- 7318.15.4000 — Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws)
- 7318.15.5030 — Of stainless steel
- 7318.15.5051 — Of alloy steel
- 7318.15.5056 — Other
- 7318.15.5090 — Other
- 7318.15.6010 — Of stainless steel
- 7318.15.6040 — Other
- 7318.15.6070 — Of stainless steel
- 7318.15.6080 — Other
- 7318.15.8020 — Set screws
- 7318.15.8030 — Of stainless steel
- 7318.15.8045 — Other
- 7318.15.8055 — Of stainless steel
- 7318.15.8066 — Cap screws
- 7318.15.8069 — Other
- 7318.15.8082 — Of stainless steel
- 7318.15.8085 — Other
- 7318.16.0015 — Non-locking chrome-plated
- 7318.16.0030 — Locking
- 7318.16.0045 — Other
- 7318.16.0060 — Of stainless steel
- 7318.16.0085 — Other
- 7318.19.0000 — Other
- 7318.21.0030 — Helical spring lock washers
- 7318.21.0090 — Other
- 7318.22.0000 — Other washers
- 7318.23.0000 — Rivets
- 7318.24.0000 — Cotters and cotter pins
- 7318.29.0000 — Other
- 7319.40.2010 — On cards
- 7319.40.2050 — Other
- 7319.40.3000 — Dressmakers' or common pins
- 7319.40.5010 — Push pins
- 7319.40.5050 — Other
- 7319.90.1000 — Sewing, darning or embroidery needles
- 7319.90.9000 — Other
- 7320.10.3000 — To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons
- 7320.10.6015 — Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor
- 7320.10.6060 — Other
- 7320.10.9015 — Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor
- 7320.10.9060 — Other
- 7320.20.1000 — Suitable for motor-vehicle suspension
- 7320.20.5010 — Suitable for use in mattress supports and mattresses of heading 9404
- 7320.20.5020 — Other
- 7320.20.5045 — Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm
- 7320.20.5060 — Other
- 7320.90.1000 — Hairsprings
- 7320.90.5010 — Suitable for use in mattress supports and mattresses of heading 9404
- 7320.90.5020 — Other
- 7320.90.5060 — Other
- 7321.11.1030 — Stoves or ranges
- 7321.11.1060 — Other
- 7321.11.3010 — Of a maximum width not exceeding 70 centimeters
- 7321.11.3020 — Of a maximum width exceeding 70 but not exceeding 80 centimeters
- 7321.11.3050 — Of a maximum width exceeding 80 centimeters
- 7321.11.6000 — Other
- 7321.12.0000 — For liquid fuel
- 7321.19.0020 — Hibachis
- 7321.19.0040 — Other
- 7321.19.0060 — Of cast iron
- 7321.19.0080 — Other
- 7321.81.1000 — Portable
- 7321.81.5000 — Other
- 7321.82.1000 — Portable
- 7321.82.5000 — Other
- 7321.89.0010 — Fireplace grates of cast iron
- 7321.89.0050 — Other
- 7321.90.1000 — Cooking chambers, whether or not assembled
- 7321.90.2000 — Top surface panels with or without burners or controls
- 7321.90.4000 — Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation
- 7321.90.5000 — Other
- 7321.90.6040 — Shelving and racks for cooking ovens
- 7321.90.6060 — Other
- 7321.90.6090 — Other
- 7322.11.0000 — Of cast iron
- 7322.19.0000 — Other
- 7322.90.0015 — Air heaters, not electrically heated, incorporating a motor-driven fan or blower
- 7322.90.0030 — Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower
- 7322.90.0045 — Parts of air heaters and hot air distributors
- 7323.10.0000 — Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
- 7323.91.1000 — Coated or plated with precious metal
- 7323.91.5020 — Bakeware (cookware not suitable for stove top use)
- 7323.91.5040 — Other
- 7323.92.0020 — Bakeware (cookware not suitable for stove top use)
- 7323.92.0040 — Other
- 7323.93.0015 — Teakettles
- 7323.93.0035 — Bakeware (cookware not suitable for stove top use)
- 7323.93.0045 — Other
- 7323.93.0060 — Kitchen ware
- 7323.93.0080 — Other
- 7323.94.0010 — Teakettles
- 7323.94.0021 — Bakeware (cookware not suitable for stove top use)
- 7323.94.0026 — Other
- 7323.94.0030 — Kitchen ware
- 7323.94.0040 — Other
- 7323.94.0080 — Other
- 7323.99.1000 — Coated or plated with silver
- 7323.99.3000 — Other
- 7323.99.5030 — Kitchen or tableware suitable for food or drink contact
- 7323.99.5060 — Other
- 7323.99.7000 — Cookingware
- 7323.99.9030 — Kitchen or tableware suitable for food or drink contact
- 7323.99.9040 — Gates for confining children or pets
- 7323.99.9080 — Other
- 7324.10.0010 — Stainless steel sinks with one or more drawn bowls (basins)
- 7324.10.0050 — Other
- 7324.21.1000 — Coated or plated with precious metal
- 7324.21.5000 — Other
- 7324.29.0000 — Other
- 7324.90.0000 — Other, including parts
- 7325.10.0010 — Manhole covers, rings and frames
- 7325.10.0020 — Catch basins, grates and frames
- 7325.10.0025 — Cleanout covers and frames
- 7325.10.0030 — Valve and service boxes
- 7325.10.0035 — Meter boxes
- 7325.10.0080 — Other
- 7325.91.0000 — Grinding balls and similar articles for mills
- 7325.99.1000 — Of cast iron
- 7325.99.5000 — Other
- 7326.11.0000 — Grinding balls and similar articles for mills
- 7326.19.0010 — Forged
- 7326.19.0080 — Other
- 7326.20.0010 — Belts and belting
- 7326.20.0020 — Garment hangers
- 7326.20.0030 — Sod staples, U staples, irrigation staples, ground staples, and ground pins
- 7326.20.0040 — Double loop bar ties and double loop wire ties
- 7326.20.0055 — Paint roller frames
- 7326.20.0090 — Other
- 7326.90.1000 — Of tinplate
- 7326.90.2500 — Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length
- 7326.90.3500 — Containers of a kind normally carried on the person, in the pocket or in the handbag
- 7326.90.4500 — Horse and mule shoes
- 7326.90.6000 — Coated or plated with precious metal
- 7326.90.8605 — Rods for electrical grounding
- 7326.90.8610 — Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material
- 7326.90.8630 — Hangers and similar supports for tubes and pipes
- 7326.90.8635 — Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates
- 7326.90.8645 — Barbed tape
- 7326.90.8660 — Ladders
- 7326.90.8675 — Paint roller frames (other than of iron or steel wire)
- 7326.90.8676 — Metal handles for brooms, mops, paint applicators and similar products
- 7326.90.8677 — Burial caskets
- 7326.90.8688 — Other
Recent changes
- Section 232 metals tariffs were broadened to apply to the full entered value of derivative steel articles.