Chapter 72 — Iron and steel
IndonesiaBrowse every tariff line under HTS Chapter 72 — Iron and steel for goods from Indonesia. Select a line to see its full duty stack.
Tariff lines 558 lines
7201 Pig iron and spiegeleisen in pigs, blocks or other…
7202 Ferroalloys
- 7202.11.1000 Ferromanganese
- 7202.11.5000 Ferromanganese
- 7202.19.1000 Ferromanganese
- 7202.19.5000 Ferromanganese
- 7202.21.1000 Ferrosilicon, Containing by weight more than 55 percent but not more than 80 percent of silicon
- 7202.21.5000 Ferrosilicon, Containing by weight more than 55 percent but not more than 80 percent of silicon
- 7202.21.7500 Ferrosilicon
- 7202.21.9000 Ferrosilicon
- 7202.29.0010 Ferrosilicon
- 7202.29.0050 Ferrosilicon
- 7202.30.0000 Ferrosilicon manganese
- 7202.41.0000 Ferrochromium
- 7202.49.1000 Ferrochromium
- 7202.49.5010 Ferrochromium
- 7202.49.5090 Ferrochromium
- 7202.50.0000 Ferrosilicon chromium
- 7202.60.0000 Ferronickel
- 7202.70.0000 Ferromolybdenum
- 7202.80.0000 Ferrotungsten and ferrosilicon tungsten
- 7202.91.0000 Other, Ferrotitanium and ferrosilicon titanium
- 7202.92.0000 Other, Ferrovanadium
- 7202.93.4000 Other, Ferroniobium
- 7202.93.8000 Other, Ferroniobium
- 7202.99.1000 Other, Ferrozirconium
- 7202.99.2000 Other, Calcium silicon
- 7202.99.8020 Other, Ferrophosphorus
- 7202.99.8040 Ferroalloys
7203 Ferrous products obtained by direct reduction of iron…
- 7203.10.0000 Ferrous products obtained by direct reduction of iron ore
- 7203.90.0000 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms
7204 Ferrous waste and scrap
- 7204.10.0000 Waste and scrap of cast iron
- 7204.21.0000 Waste and scrap of alloy steel, Of stainless steel
- 7204.29.0000 Waste and scrap of alloy steel
- 7204.30.0000 Waste and scrap of tinned iron or steel
- 7204.41.0020 Other waste and scrap, Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles, No. 1 bundles
- 7204.41.0040 Other waste and scrap, Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles, No. 2 bundles
- 7204.41.0060 Other waste and scrap, Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles, Borings, shovelings and turnings
- 7204.41.0080 Other waste and scrap, Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
- 7204.49.0020 Other waste and scrap, No. 1 heavy melting
- 7204.49.0040 Other waste and scrap, No. 2 heavy melting
- 7204.49.0060 Other waste and scrap, Other, Cut plate and structural
- 7204.49.0070 Other waste and scrap, Other, Shredded
- 7204.49.0080 Other waste and scrap, Other
- 7204.50.0000 Remelting scrap ingots
7205 Granules and powders, of pig iron, spiegeleisen, iron or…
7206 Iron and nonalloy steel in ingots or other primary forms…
7207 Semifinished products of iron or nonalloy steel
- 7207.11.0000 Of rectangular (including square) cross section, the width measuring less than twice the thickness
- 7207.12.0010 Having a width measuring less than four times the thickness
- 7207.12.0050 Having a width measuring at least four times the thickness
- 7207.19.0030 Containing by weight less than 0.25 percent of carbon, Of circular cross section
- 7207.19.0090 Containing by weight less than 0.25 percent of carbon
- 7207.20.0025 Having a width measuring less than four times the thickness
- 7207.20.0045 Having a width measuring at least four times the thickness
- 7207.20.0075 Of circular cross section
- 7207.20.0090 Semifinished products of iron or nonalloy steel
7208 Flat-rolled products of iron or nonalloy steel, of a…
- 7208.10.1500 In coils, not further worked than hot-rolled, with patterns in relief, Pickled
- 7208.10.3000 In coils, not further worked than hot-rolled, with patterns in relief, Other
- 7208.10.6000 In coils, not further worked than hot-rolled, with patterns in relief, Other
- 7208.25.3000 Other, in coils, not further worked than hot-rolled, pickled, Of high-strength steel
- 7208.25.6000 Other, in coils, not further worked than hot-rolled, pickled
- 7208.26.0030 Other, in coils, not further worked than hot-rolled, pickled, High-strength steel
- 7208.26.0060 Other, in coils, not further worked than hot-rolled, pickled
- 7208.27.0040 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- 7208.27.0045 Other, in coils, not further worked than hot-rolled, pickled, High-strength steel
- 7208.27.0060 Other, in coils, not further worked than hot-rolled, pickled
- 7208.36.0030 Other, in coils, not further worked than hot-rolled, High-strength steel
- 7208.36.0060 Other, in coils, not further worked than hot-rolled
- 7208.37.0030 Other, in coils, not further worked than hot-rolled, High-strength steel
- 7208.37.0060 Other, in coils, not further worked than hot-rolled
- 7208.38.0015 Other, in coils, not further worked than hot-rolled, High-strength steel
- 7208.38.0030 Other, in coils, not further worked than hot-rolled, Other, With untrimmed edges
- 7208.38.0090 Other, in coils, not further worked than hot-rolled, Other
- 7208.39.0020 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- 7208.39.0025 Other, in coils, not further worked than hot-rolled, High-strength steel
- 7208.39.0030 Other, in coils, not further worked than hot-rolled, Other, With untrimmed edges
- 7208.39.0090 Other, in coils, not further worked than hot-rolled, Other
- 7208.40.3030 Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.40.3060 Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.40.6030 Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.40.6060 Not in coils, not further worked than hot-rolled, with patterns in relief
- 7208.51.0030 Other, not in coils, not further worked than hot-rolled, Universal mill plate
- 7208.51.0045 Other, not in coils, not further worked than hot-rolled, Other, Of high-strength steel
- 7208.51.0060 Other, not in coils, not further worked than hot-rolled, Other
- 7208.52.0000 Other, not in coils, not further worked than hot-rolled
- 7208.53.0000 Other, not in coils, not further worked than hot-rolled
- 7208.54.0000 Other, not in coils, not further worked than hot-rolled
- 7208.90.0000 Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7209 Flat-rolled products of iron or nonalloy steel, of a…
- 7209.15.0000 In coils, not further worked than cold-rolled (cold-reduced)
- 7209.16.0040 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- 7209.16.0045 In coils, not further worked than cold-rolled (cold-reduced), Of high-strength steel, Annealed
- 7209.16.0060 In coils, not further worked than cold-rolled (cold-reduced), Of high-strength steel
- 7209.16.0070 In coils, not further worked than cold-rolled (cold-reduced), Other, Annealed
- 7209.16.0091 In coils, not further worked than cold-rolled (cold-reduced), Other
- 7209.17.0040 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- 7209.17.0045 In coils, not further worked than cold-rolled (cold-reduced), Of high-strength steel, Annealed
- 7209.17.0060 In coils, not further worked than cold-rolled (cold-reduced), Of high-strength steel
- 7209.17.0070 In coils, not further worked than cold-rolled (cold-reduced), Other, Annealed
- 7209.17.0091 In coils, not further worked than cold-rolled (cold-reduced), Other
- 7209.18.1530 In coils, not further worked than cold-rolled (cold-reduced), Of high-strength steel, Annealed
- 7209.18.1560 In coils, not further worked than cold-rolled (cold-reduced), Of high-strength steel
- 7209.18.2520 In coils, not further worked than cold-rolled (cold-reduced), Other, Annealed
- 7209.18.2585 In coils, not further worked than cold-rolled (cold-reduced), Other
- 7209.18.6020 In coils, not further worked than cold-rolled (cold-reduced), Other, Annealed
- 7209.18.6090 In coils, not further worked than cold-rolled (cold-reduced), Other
- 7209.25.0000 Not in coils, not further worked than cold-rolled (cold-reduced)
- 7209.26.0000 Not in coils, not further worked than cold-rolled (cold-reduced)
- 7209.27.0000 Not in coils, not further worked than cold-rolled (cold-reduced)
- 7209.28.0000 Not in coils, not further worked than cold-rolled (cold-reduced)
- 7209.90.0000 Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
7210 Flat-rolled products of iron or nonalloy steel, of a…
- 7210.11.0000 Plated or coated with tin
- 7210.12.0000 Plated or coated with tin
- 7210.20.0000 Plated or coated with lead, including terne-plate
- 7210.30.0030 Electrolytically plated or coated with zinc, Of high-strength steel
- 7210.30.0060 Electrolytically plated or coated with zinc
- 7210.41.0000 Otherwise plated or coated with zinc, Corrugated
- 7210.49.0040 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- 7210.49.0045 Otherwise plated or coated with zinc, Of high-strength steel
- 7210.49.0091 Otherwise plated or coated with zinc, Other
- 7210.49.0095 Otherwise plated or coated with zinc, Other
- 7210.50.0020 Of a width less than 1050 mm
- 7210.50.0090 Plated or coated with chromium oxides or with chromium and chromium oxides
- 7210.61.0000 Plated or coated with aluminum, Plated or coated with aluminum-zinc alloys
- 7210.69.0000 Plated or coated with aluminum
- 7210.70.3000 Painted, varnished or coated with plastics, Not coated or plated with metal and not clad
- 7210.70.6030 Painted, varnished or coated with plastics, Zinc coated or plated, Electrolytically coated or plated
- 7210.70.6060 Painted, varnished or coated with plastics, Zinc coated or plated
- 7210.70.6090 Painted, varnished or coated with plastics
- 7210.90.1000 Clad
- 7210.90.6000 Other, Electrolytically coated or plated with base metal
- 7210.90.9000 Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated
7211 Flat-rolled products of iron or nonalloy steel, of a…
- 7211.13.0000 Not further worked than hot-rolled, Universal mill plate
- 7211.14.0030 Not further worked than hot-rolled, Of high-strength steel
- 7211.14.0045 Not further worked than hot-rolled, Other, Not in coils
- 7211.14.0090 Not further worked than hot-rolled, Other
- 7211.19.1500 Not further worked than hot-rolled, Of a width of less than 300 mm, Of high-strength steel
- 7211.19.2000 Not further worked than hot-rolled, Of a width of less than 300 mm, Other
- 7211.19.3000 Not further worked than hot-rolled, Of a width of less than 300 mm, Other
- 7211.19.4500 Not further worked than hot-rolled, Other, Of high-strength steel
- 7211.19.6000 Not further worked than hot-rolled, Other, Pickled
- 7211.19.7530 Not further worked than hot-rolled, Other, In coils, With untrimmed edges
- 7211.19.7560 Not further worked than hot-rolled, Other, In coils
- 7211.19.7590 Not further worked than hot-rolled, Other
- 7211.23.1500 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 1.25 mm, Of high-strength steel
- 7211.23.2000 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness exceeding 1.25 mm
- 7211.23.3000 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm
- 7211.23.4500 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm
- 7211.23.6030 Not further worked than cold-rolled (cold-reduced)
- 7211.23.6060 Not further worked than cold-rolled (cold-reduced)
- 7211.23.6090 Not further worked than cold-rolled (cold-reduced)
- 7211.29.2030 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm
- 7211.29.2090 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm
- 7211.29.4500 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm
- 7211.29.6030 Not further worked than cold-rolled (cold-reduced)
- 7211.29.6080 Not further worked than cold-rolled (cold-reduced)
- 7211.90.0000 Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated
7212 Flat-rolled products of iron or nonalloy steel, of a…
- 7212.10.0000 Plated or coated with tin
- 7212.20.0000 Electrolytically plated or coated with zinc
- 7212.30.1030 Otherwise plated or coated with zinc, Of a width of less than 300 mm
- 7212.30.1090 Otherwise plated or coated with zinc, Of a width of less than 300 mm
- 7212.30.3000 Otherwise plated or coated with zinc, Of a width of less than 300 mm
- 7212.30.5000 Otherwise plated or coated with zinc
- 7212.40.1000 Painted, varnished or coated with plastics
- 7212.40.5000 Painted, varnished or coated with plastics
- 7212.50.0000 Otherwise plated or coated
- 7212.60.0000 Clad
7213 Bars and rods, hot-rolled, in irregularly wound coils,…
- 7213.10.0000 Concrete reinforcing bars and rods
- 7213.20.0010 Other, of free-cutting steel
- 7213.20.0080 Other, of free-cutting steel
- 7213.91.3011 Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter
- 7213.91.3015 Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
- 7213.91.3020 Of welding quality wire rods of a kind described in statistical note 7 to this chapter
- 7213.91.3093 Other, Not tempered, not treated and not partly manufactured
- 7213.91.4500 Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel
- 7213.91.6000 Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel
- 7213.99.0030 Other, Of circular cross section
- 7213.99.0060 Other, Of circular cross section
- 7213.99.0090 Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel
7214 Other bars and rods of iron or nonalloy steel, not…
- 7214.10.0000 Forged
- 7214.20.0000 Concrete reinforcing bars and rods
- 7214.30.0010 Other, of free-cutting steel
- 7214.30.0080 Other, of free-cutting steel
- 7214.91.0016 Other, Of rectangular (other than square) cross-section, Containing by weight less than 0.25 percent of carbon
- 7214.91.0020 Other, Of rectangular (other than square) cross-section, Containing by weight less than 0.25 percent of carbon
- 7214.91.0060 Other, Of rectangular (other than square) cross-section
- 7214.91.0090 Other, Of rectangular (other than square) cross-section
- 7214.99.0016 Other, Rounds, Containing by weight less than 0.25 percent of carbon
- 7214.99.0021 Other, Rounds, Containing by weight less than 0.25 percent of carbon
- 7214.99.0026 Other, Rounds, Containing by weight less than 0.25 percent of carbon
- 7214.99.0031 Other, Rounds, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7214.99.0036 Other, Rounds, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7214.99.0040 Other, Rounds, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7214.99.0045 Other, Rounds
- 7214.99.0060 Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- 7214.99.0075 Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- 7214.99.0090 Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7215 Other bars and rods of iron or nonalloy steel
- 7215.10.0010 Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215.10.0080 Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215.50.0016 Other, not further worked than cold-formed or cold-finished, Containing by weight less than 0.25 percent of carbon
- 7215.50.0018 Other, not further worked than cold-formed or cold-finished, Containing by weight less than 0.25 percent of carbon
- 7215.50.0020 Other, not further worked than cold-formed or cold-finished, Containing by weight less than 0.25 percent of carbon
- 7215.50.0061 Other, not further worked than cold-formed or cold-finished, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7215.50.0063 Other, not further worked than cold-formed or cold-finished, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7215.50.0065 Other, not further worked than cold-formed or cold-finished, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7215.50.0090 Other, not further worked than cold-formed or cold-finished
- 7215.90.1000 Plated or coated with metal, Not cold-formed
- 7215.90.3000 Plated or coated with metal, Cold-formed
- 7215.90.5000 Other bars and rods of iron or nonalloy steel
7216 Angles, shapes and sections of iron or nonalloy steel
- 7216.10.0010 U sections
- 7216.10.0050 Angles, shapes and sections of iron or nonalloy steel
- 7216.21.0000 L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm, L sections
- 7216.22.0000 L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm, T sections
- 7216.31.0000 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more, U sections
- 7216.32.0000 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more, I sections (standard beams)
- 7216.33.0030 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more, H sections
- 7216.33.0060 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more, H sections
- 7216.33.0090 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more, H sections
- 7216.40.0010 L sections
- 7216.40.0050 Angles, shapes and sections of iron or nonalloy steel
- 7216.50.0000 Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- 7216.61.0000 Angles, shapes and sections, not further worked than cold-formed or cold-finished, Obtained from flat-rolled products
- 7216.69.0000 Angles, shapes and sections, not further worked than cold-formed or cold-finished
- 7216.91.0010 Other, Cold-formed or cold-finished from flat-rolled products, Drilled, notched, punched or cambered
- 7216.91.0090 Other, Cold-formed or cold-finished from flat-rolled products
- 7216.99.0010 Other, Drilled, notched, punched or cambered
- 7216.99.0090 Angles, shapes and sections of iron or nonalloy steel
7217 Wire of iron or nonalloy steel
- 7217.10.1000 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Flat wire
- 7217.10.2000 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Flat wire
- 7217.10.3000 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Flat wire
- 7217.10.4040 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Round wire, Heat treated, In coils weighing not more than 2 kilograms
- 7217.10.4045 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Round wire, Heat treated
- 7217.10.4090 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Round wire
- 7217.10.5030 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Round wire, Heat treated
- 7217.10.5090 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Round wire
- 7217.10.6000 Not plated or coated, whether or not polished, Containing by weight less than 0.25 percent of carbon, Other wire
- 7217.10.7000 Not plated or coated, whether or not polished, Other, Flat wire
- 7217.10.8010 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon, Heat treated
- 7217.10.8020 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7217.10.8025 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.6 percent or more of carbon, Heat treated
- 7217.10.8030 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.6 percent or more of carbon, Heat treated
- 7217.10.8045 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.6 percent or more of carbon, Heat treated
- 7217.10.8060 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.6 percent or more of carbon, Other
- 7217.10.8075 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.6 percent or more of carbon, Other
- 7217.10.8090 Not plated or coated, whether or not polished, Other, Round wire, Containing by weight 0.6 percent or more of carbon, Other
- 7217.10.9000 Not plated or coated, whether or not polished, Other, Other wire
- 7217.20.1500 Plated or coated with zinc, Flat wire
- 7217.20.3000 Plated or coated with zinc, Round wire
- 7217.20.4510 Plated or coated with zinc, Round wire, With a diameter of less than 1.0 mm
- 7217.20.4520 Plated or coated with zinc, Round wire, With a diameter of less than 1.0 mm
- 7217.20.4530 Plated or coated with zinc, Round wire, With a diameter of less than 1.0 mm
- 7217.20.4540 Plated or coated with zinc, Round wire, With a diameter of 1.0 mm or more but less than 1.5 mm
- 7217.20.4550 Plated or coated with zinc, Round wire, With a diameter of 1.0 mm or more but less than 1.5 mm
- 7217.20.4560 Plated or coated with zinc, Round wire, With a diameter of 1.0 mm or more but less than 1.5 mm
- 7217.20.4570 Plated or coated with zinc, Round wire, With a diameter of 1.5 mm or more
- 7217.20.4580 Plated or coated with zinc, Round wire, With a diameter of 1.5 mm or more
- 7217.20.6000 Plated or coated with zinc, Other
- 7217.20.7500 Plated or coated with zinc, Other
- 7217.30.1530 Plated or coated with other base metals, Flat wire
- 7217.30.1560 Plated or coated with other base metals, Flat wire
- 7217.30.3000 Plated or coated with other base metals, Round wire
- 7217.30.4504 Plated or coated with other base metals, Round wire
- 7217.30.4511 Plated or coated with other base metals, Round wire, Other, With a diameter of less than 1.0 mm
- 7217.30.4520 Plated or coated with other base metals, Round wire, Other, With a diameter of less than 1.0 mm
- 7217.30.4530 Plated or coated with other base metals, Round wire, Other, With a diameter of less than 1.0 mm
- 7217.30.4541 Plated or coated with other base metals, Round wire, Other, With a diameter of 1.0 mm or more but less than 1.5 mm
- 7217.30.4550 Plated or coated with other base metals, Round wire, Other, With a diameter of 1.0 mm or more but less than 1.5 mm
- 7217.30.4560 Plated or coated with other base metals, Round wire, Other, With a diameter of 1.0 mm or more but less than 1.5 mm
- 7217.30.4590 Plated or coated with other base metals, Round wire, Other
- 7217.30.6000 Plated or coated with other base metals, Other
- 7217.30.7500 Plated or coated with other base metals, Other
- 7217.90.1000 Coated with plastics
- 7217.90.5030 Containing by weight less than 0.25 percent of carbon
- 7217.90.5060 Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- 7217.90.5090 Containing by weight 0.6 percent or more of carbon
7218 Stainless steel in ingots or other primary forms
- 7218.10.0000 Ingots and other primary forms
- 7218.91.0015 Having a cross-sectional area of less than 232 cm2
- 7218.91.0030 Other, Of rectangular (other than square) cross-section, Having a width less than four times the thickness, Having a cross-sectional area of 232 cm2 or more
- 7218.91.0060 Other, Of rectangular (other than square) cross-section, Having a width at least four times the thickness
- 7218.99.0015 Having a cross-sectional area of less than 232 cm2
- 7218.99.0030 Other, Of square cross section, Having a cross-sectional area of 232 cm2 or more
- 7218.99.0045 Having a cross-sectional area of less than 232 cm2
- 7218.99.0060 Other, Of circular cross section, Having a cross-sectional area of 232 cm2 or more
- 7218.99.0090 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7219 Flat-rolled products of stainless steel, of a width of…
- 7219.11.0030 Not further worked than hot-rolled, in coils
- 7219.11.0060 Not further worked than hot-rolled, in coils
- 7219.12.0002 Not further worked than hot-rolled, in coils, Not annealed or not pickled
- 7219.12.0006 Not further worked than hot-rolled, in coils, Other, Of high-nickel alloy steel
- 7219.12.0021 Not further worked than hot-rolled, in coils, Other, Of a width of 1370 mm or more, Of a thickness exceeding 6.8 mm
- 7219.12.0026 Not further worked than hot-rolled, in coils, Other, Of a width of 1370 mm or more, Of a thickness exceeding 6.8 mm
- 7219.12.0051 Not further worked than hot-rolled, in coils, Other, Of a width of 1370 mm or more, Other
- 7219.12.0056 Not further worked than hot-rolled, in coils, Other, Of a width of 1370 mm or more, Other
- 7219.12.0066 Not further worked than hot-rolled, in coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.12.0071 Not further worked than hot-rolled, in coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.12.0081 Not further worked than hot-rolled, in coils, Other
- 7219.13.0002 Not further worked than hot-rolled, in coils, Not annealed or not pickled
- 7219.13.0031 Not further worked than hot-rolled, in coils, Other
- 7219.13.0051 Not further worked than hot-rolled, in coils, Other, Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7219.13.0071 Not further worked than hot-rolled, in coils, Other, Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7219.13.0081 Not further worked than hot-rolled, in coils, Other
- 7219.14.0030 Not further worked than hot-rolled, in coils
- 7219.14.0065 Not further worked than hot-rolled, in coils, Other, Of high-nickel alloy steel
- 7219.14.0090 Not further worked than hot-rolled, in coils, Other
- 7219.21.0005 Not further worked than hot-rolled, not in coils, Of high-nickel alloy steel
- 7219.21.0020 Not further worked than hot-rolled, not in coils, Other
- 7219.21.0040 Not further worked than hot-rolled, not in coils, Other
- 7219.21.0060 Not further worked than hot-rolled, not in coils, Other
- 7219.22.0005 Not further worked than hot-rolled, not in coils, Of high-nickel alloy steel
- 7219.22.0015 Not further worked than hot-rolled, not in coils, Other, Containing more than 0.5 percent by weight of nickel, Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
- 7219.22.0020 Not further worked than hot-rolled, not in coils, Other, Containing more than 0.5 percent by weight of nickel, Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
- 7219.22.0025 Not further worked than hot-rolled, not in coils, Other, Containing more than 0.5 percent by weight of nickel, Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
- 7219.22.0035 Not further worked than hot-rolled, not in coils, Other, Containing more than 0.5 percent by weight of nickel, Other
- 7219.22.0040 Not further worked than hot-rolled, not in coils, Other, Containing more than 0.5 percent by weight of nickel, Other
- 7219.22.0045 Not further worked than hot-rolled, not in coils, Other, Containing more than 0.5 percent by weight of nickel, Other
- 7219.22.0070 Not further worked than hot-rolled, not in coils, Other
- 7219.22.0075 Not further worked than hot-rolled, not in coils, Other
- 7219.22.0080 Not further worked than hot-rolled, not in coils, Other
- 7219.23.0030 Not further worked than hot-rolled, not in coils
- 7219.23.0060 Not further worked than hot-rolled, not in coils
- 7219.24.0030 Not further worked than hot-rolled, not in coils
- 7219.24.0060 Not further worked than hot-rolled, not in coils
- 7219.31.0010 Not further worked than cold-rolled (cold-reduced), In coils
- 7219.31.0050 Not further worked than cold-rolled (cold-reduced), Not in coils
- 7219.32.0005 Not further worked than cold-rolled (cold-reduced), In coils, Of a width of 1370 mm or more, Of high-nickel alloy steel
- 7219.32.0020 Not further worked than cold-rolled (cold-reduced), In coils, Of a width of 1370 mm or more, Other
- 7219.32.0025 Not further worked than cold-rolled (cold-reduced), In coils, Of a width of 1370 mm or more, Other
- 7219.32.0035 Not further worked than cold-rolled (cold-reduced), In coils, Other, Of high-nickel alloy steel
- 7219.32.0036 Not further worked than cold-rolled (cold-reduced), In coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.32.0038 Not further worked than cold-rolled (cold-reduced), In coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.32.0042 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.32.0044 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.32.0045 Not further worked than cold-rolled (cold-reduced), Not in coils
- 7219.32.0060 Not further worked than cold-rolled (cold-reduced), Not in coils
- 7219.33.0005 Not further worked than cold-rolled (cold-reduced), In coils, Of a width of 1370 mm or more, Of high-nickel alloy steel
- 7219.33.0020 Not further worked than cold-rolled (cold-reduced), In coils, Of a width of 1370 mm or more, Other
- 7219.33.0025 Not further worked than cold-rolled (cold-reduced), In coils, Of a width of 1370 mm or more, Other
- 7219.33.0035 Not further worked than cold-rolled (cold-reduced), In coils, Other, Of high-nickel alloy steel
- 7219.33.0036 Not further worked than cold-rolled (cold-reduced), In coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.33.0038 Not further worked than cold-rolled (cold-reduced), In coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.33.0042 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.33.0044 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.33.0045 Not further worked than cold-rolled (cold-reduced), Not in coils
- 7219.33.0070 Not further worked than cold-rolled (cold-reduced), Not in coils, Other
- 7219.33.0080 Not further worked than cold-rolled (cold-reduced), Not in coils, Other
- 7219.34.0005 Not further worked than cold-rolled (cold-reduced), In coils, Of high-nickel alloy steel
- 7219.34.0020 Not further worked than cold-rolled (cold-reduced), In coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.34.0025 Not further worked than cold-rolled (cold-reduced), In coils, Other, Containing more than 0.5 percent by weight of nickel
- 7219.34.0030 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.34.0035 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.34.0050 Not further worked than cold-rolled (cold-reduced), Not in coils
- 7219.35.0005 Not further worked than cold-rolled (cold-reduced), In coils, Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7219.35.0015 Not further worked than cold-rolled (cold-reduced), In coils, Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7219.35.0030 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.35.0035 Not further worked than cold-rolled (cold-reduced), In coils, Other
- 7219.35.0050 Not further worked than cold-rolled (cold-reduced), Not in coils
- 7219.90.0010 Of high-nickel alloy steel
- 7219.90.0020 Other, Containing more than 0.5 percent by weight of nickel
- 7219.90.0025 Other, Containing more than 0.5 percent by weight of nickel
- 7219.90.0060 Flat-rolled products of stainless steel, of a width of 600 mm or more
- 7219.90.0080 Flat-rolled products of stainless steel, of a width of 600 mm or more
7220 Flat-rolled products of stainless steel, of a width of…
- 7220.11.0000 Not further worked than hot-rolled
- 7220.12.1000 Not further worked than hot-rolled
- 7220.12.5000 Not further worked than hot-rolled
- 7220.20.1010 Not further worked than cold-rolled (cold-reduced), Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7220.20.1015 Not further worked than cold-rolled (cold-reduced), Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7220.20.1060 Not further worked than cold-rolled (cold-reduced), Other
- 7220.20.1080 Not further worked than cold-rolled (cold-reduced), Other
- 7220.20.6005 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of high-nickel alloy steel
- 7220.20.6010 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other, Containing more than 0.5 percent by weight of nickel
- 7220.20.6015 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other, Containing more than 0.5 percent by weight of nickel
- 7220.20.6060 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other
- 7220.20.6080 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other
- 7220.20.7005 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of high-nickel alloy steel
- 7220.20.7010 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other, Containing more than 0.5 percent by weight of nickel
- 7220.20.7015 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other, Containing more than 0.5 percent by weight of nickel
- 7220.20.7060 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other
- 7220.20.7080 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Other
- 7220.20.8000 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness not exceeding 0.25 mm, Razor blade steel
- 7220.20.9030 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness not exceeding 0.25 mm
- 7220.20.9060 Not further worked than cold-rolled (cold-reduced), Of a width of less than 300 mm, Of a thickness not exceeding 0.25 mm
- 7220.90.0010 Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7220.90.0015 Containing more than 0.5 percent but less than 24 percent by weight of nickel
- 7220.90.0060 Flat-rolled products of stainless steel, of a width of less than 600 mm
- 7220.90.0080 Flat-rolled products of stainless steel, of a width of less than 600 mm
7221 Bars and rods, hot-rolled, in irregularly wound coils,…
- 7221.00.0005 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, Of high-nickel alloy steel
- 7221.00.0017 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, Other, Of circular cross section, With a diameter of less than 14 mm
- 7221.00.0018 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, Other, Of circular cross section, With a diameter of less than 14 mm
- 7221.00.0030 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, Other, Of circular cross section
- 7221.00.0045 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, Other, Of circular cross section
- 7221.00.0075 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, Other
7222 Other bars and rods of stainless steel
- 7222.11.0001 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of circular cross-section, Electroslag or vacuum arc remelted
- 7222.11.0006 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of circular cross-section, Of high-nickel alloy steel
- 7222.11.0057 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of circular cross-section, Other, With a maximum cross-sectional dimension of less than 152.4 mm
- 7222.11.0059 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of circular cross-section, Other, With a maximum cross-sectional dimension of less than 152.4 mm
- 7222.11.0082 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of circular cross-section, Other, With a maximum cross-sectional dimension of 152.4 mm or more
- 7222.11.0084 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of circular cross-section, Other, With a maximum cross-sectional dimension of 152.4 mm or more
- 7222.19.0001 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Electroslag or vacuum arc remelted
- 7222.19.0006 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other, Of high-nickel alloy steel
- 7222.19.0052 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other
- 7222.19.0054 Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other
- 7222.20.0001 Bars and rods, not further worked than cold-formed or cold-finished, Electroslag or vacuum arc remelted
- 7222.20.0006 Bars and rods, not further worked than cold-formed or cold-finished, Of high-nickel alloy steel
- 7222.20.0041 Bars and rods, not further worked than cold-formed or cold-finished, Other, Of a circular cross-section, With a maximum circular cross-sectional dimension of less than 18 mm
- 7222.20.0043 Bars and rods, not further worked than cold-formed or cold-finished, Other, Of a circular cross-section, With a maximum circular cross-sectional dimension of less than 18 mm
- 7222.20.0062 Bars and rods, not further worked than cold-formed or cold-finished, Other, Of a circular cross-section, With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm
- 7222.20.0064 Bars and rods, not further worked than cold-formed or cold-finished, Other, Of a circular cross-section, With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm
- 7222.20.0067 Bars and rods, not further worked than cold-formed or cold-finished, Other, Of a circular cross-section, With a maximum circular cross-sectional dimension of 152.4 mm or more
- 7222.20.0069 Bars and rods, not further worked than cold-formed or cold-finished, Other, Of a circular cross-section, With a maximum circular cross-sectional dimension of 152.4 mm or more
- 7222.20.0071 Bars and rods, not further worked than cold-formed or cold-finished, Other
- 7222.20.0073 Bars and rods, not further worked than cold-formed or cold-finished, Other
- 7222.30.0001 Other bars and rods, Electroslag or vacuum arc remelted
- 7222.30.0012 Other bars and rods, Of high-nickel alloy steel
- 7222.30.0022 Other bars and rods, Other, With a maximum cross-sectional dimension of less than 152.4 mm
- 7222.30.0024 Other bars and rods, Other, With a maximum cross-sectional dimension of less than 152.4 mm
- 7222.30.0082 Other bars and rods, Other, With a maximum cross-sectional dimension of 152.4 mm or more
- 7222.30.0084 Other bars and rods, Other, With a maximum cross-sectional dimension of 152.4 mm or more
- 7222.40.3025 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, With a maximum cross-sectional dimension of 80 mm or more, Angles
- 7222.40.3045 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, With a maximum cross-sectional dimension of 80 mm or more
- 7222.40.3065 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, With a maximum cross-sectional dimension of less than 80 mm, Angles
- 7222.40.3085 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, With a maximum cross-sectional dimension of less than 80 mm
- 7222.40.6000 Angles, shapes and sections
7223 Wire of stainless steel
- 7223.00.1005 Spring round wire of a kind described in statistical note 8 to this chapter
- 7223.00.1016 Wire of stainless steel, Round wire, Other
- 7223.00.1031 Wire of stainless steel, Round wire, Other
- 7223.00.1046 Wire of stainless steel, Round wire, Other
- 7223.00.1061 Wire of stainless steel, Round wire, Other
- 7223.00.1076 Wire of stainless steel, Round wire, Other
- 7223.00.5000 Wire of stainless steel, Flat wire
- 7223.00.9000 Wire of stainless steel
7224 Other alloy steel in ingots or other primary forms
- 7224.10.0005 Ingots and other primary forms, Of high-nickel alloy steel
- 7224.10.0045 Ingots and other primary forms, Other, Of tool steel
- 7224.10.0075 Ingots and other primary forms, Other
- 7224.90.0005 Of high-nickel alloy steel
- 7224.90.0015 Other, Of tool steel, Of rectangular (including square) cross section, Having a width less than four times the thickness
- 7224.90.0025 Other, Of tool steel, Of rectangular (including square) cross section, Having a width at least four times the thickness
- 7224.90.0035 Other, Of tool steel
- 7224.90.0045 Other, Of rectangular (including square) cross section, Having a width less than four times the thickness
- 7224.90.0055 Other, Of rectangular (including square) cross section, Having a width at least four times the thickness
- 7224.90.0065 Other, Of circular cross section
- 7224.90.0075 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7225 Flat-rolled products of other alloy steel, of a width of…
- 7225.11.0000 Of silicon electrical steel, Grain-oriented
- 7225.19.0000 Of silicon electrical steel
- 7225.30.1110 Other, not further worked than hot-rolled, in coils, Of a thickness of 4.75 mm or more, Of tool steel, Of high-speed steel
- 7225.30.1180 Other, not further worked than hot-rolled, in coils, Of a thickness of 4.75 mm or more, Of tool steel
- 7225.30.3005 Other, not further worked than hot-rolled, in coils, Of a thickness of 4.75 mm or more, Of high-nickel alloy steel
- 7225.30.3050 Other, not further worked than hot-rolled, in coils, Of a thickness of 4.75 mm or more
- 7225.30.5110 Other, not further worked than hot-rolled, in coils, Of a thickness of less than 4.75 mm, Of tool steel, Of high-speed steel
- 7225.30.5180 Other, not further worked than hot-rolled, in coils, Of a thickness of less than 4.75 mm, Of tool steel
- 7225.30.7000 Other, not further worked than hot-rolled, in coils, Of a thickness of less than 4.75 mm
- 7225.40.1110 Other, not further worked than hot-rolled, not in coils, Of a thickness of 4.75 mm or more, Of tool steel, Of high-speed steel
- 7225.40.1180 Other, not further worked than hot-rolled, not in coils, Of a thickness of 4.75 mm or more, Of tool steel
- 7225.40.3005 Other, not further worked than hot-rolled, not in coils, Of a thickness of 4.75 mm or more, Of high-nickel alloy steel
- 7225.40.3050 Other, not further worked than hot-rolled, not in coils, Of a thickness of 4.75 mm or more
- 7225.40.5110 Other, not further worked than hot-rolled, not in coils, Of a thickness of less than 4.75 mm, Of tool steel, Of high-speed steel
- 7225.40.5130 Other, not further worked than hot-rolled, not in coils, Of a thickness of less than 4.75 mm, Of tool steel, Of ball-bearing steel
- 7225.40.5160 Other, not further worked than hot-rolled, not in coils, Of a thickness of less than 4.75 mm, Of tool steel
- 7225.40.7000 Other, not further worked than hot-rolled, not in coils, Of a thickness of less than 4.75 mm
- 7225.50.1110 Other, not further worked than cold-rolled (cold-reduced), Of tool steel, Of high-speed steel
- 7225.50.1130 Other, not further worked than cold-rolled (cold-reduced), Of tool steel, Of ball-bearing steel
- 7225.50.1160 Other, not further worked than cold-rolled (cold-reduced), Of tool steel
- 7225.50.6000 Other, not further worked than cold-rolled (cold-reduced), Other
- 7225.50.7000 Other, not further worked than cold-rolled (cold-reduced), Other, Of a thickness of less than 4.75 mm, Heat-resisting steel
- 7225.50.8010 Other, not further worked than cold-rolled (cold-reduced), Other, Of a thickness of less than 4.75 mm, Of high-nickel alloy steel
- 7225.50.8080 Other, not further worked than cold-rolled (cold-reduced), Other, Of a thickness of less than 4.75 mm
- 7225.91.0000 Other, Electrolytically plated or coated with zinc
- 7225.92.0000 Other, Otherwise plated or coated with zinc
- 7225.99.0010 Other, Of high-nickel alloy steel
- 7225.99.0090 Flat-rolled products of other alloy steel, of a width of 600 mm or more
7226 Flat-rolled products of other alloy steel, of a width of…
- 7226.11.1000 Of silicon electrical steel, Grain-oriented
- 7226.11.9030 Of silicon electrical steel, Grain-oriented
- 7226.11.9060 Of silicon electrical steel, Grain-oriented
- 7226.19.1000 Of silicon electrical steel
- 7226.19.9000 Of silicon electrical steel
- 7226.20.0000 Of high-speed steel
- 7226.91.0500 Other, Not further worked than hot-rolled, Of tool steel (other than high-speed steel), Of chipper knife steel
- 7226.91.1530 Other, Not further worked than hot-rolled, Of tool steel (other than high-speed steel), Other, Of ball-bearing steel
- 7226.91.1560 Other, Not further worked than hot-rolled, Of tool steel (other than high-speed steel), Other
- 7226.91.2530 Other, Not further worked than hot-rolled, Of tool steel (other than high-speed steel), Other, Of ball-bearing steel
- 7226.91.2560 Other, Not further worked than hot-rolled, Of tool steel (other than high-speed steel), Other
- 7226.91.5000 Other, Not further worked than hot-rolled, Other
- 7226.91.7000 Other, Not further worked than hot-rolled, Other, Of a thickness of less than 4.75 mm
- 7226.91.8000 Other, Not further worked than hot-rolled, Other, Of a thickness of less than 4.75 mm
- 7226.92.1030 Other, Not further worked than cold-rolled (cold-reduced), Of tool steel (other than high-speed steel), Of ball-bearing steel
- 7226.92.1060 Other, Not further worked than cold-rolled (cold-reduced), Of tool steel (other than high-speed steel)
- 7226.92.3030 Other, Not further worked than cold-rolled (cold-reduced), Of tool steel (other than high-speed steel), Of ball-bearing steel
- 7226.92.3060 Other, Not further worked than cold-rolled (cold-reduced), Of tool steel (other than high-speed steel)
- 7226.92.5000 Other, Not further worked than cold-rolled (cold-reduced), Other
- 7226.92.7005 Other, Not further worked than cold-rolled (cold-reduced), Other, Of a width of less than 300 mm, Of high-nickel alloy steel
- 7226.92.7050 Other, Not further worked than cold-rolled (cold-reduced), Other, Of a width of less than 300 mm
- 7226.92.8005 Other, Not further worked than cold-rolled (cold-reduced), Other, Of a width of less than 300 mm, Of high-nickel alloy steel
- 7226.92.8050 Other, Not further worked than cold-rolled (cold-reduced), Other, Of a width of less than 300 mm
- 7226.99.0110 Other, Electrolytically plated or coated with zinc
- 7226.99.0130 Other, Otherwise plated or coated with zinc
- 7226.99.0180 Flat-rolled products of other alloy steel, of a width of less than 600 mm
7227 Bars and rods, hot-rolled, in irregularly wound coils,…
- 7227.10.0000 Of high-speed steel
- 7227.20.0030 Of welding quality wire rods of a kind described in statistical note 7 to this chapter
- 7227.20.0080 Of silico-manganese steel
- 7227.90.1030 Of tool steel (other than high-speed steel), Not tempered, not treated, and not partly manufactured, Of ball-bearing steel
- 7227.90.1060 Of tool steel (other than high-speed steel), Not tempered, not treated, and not partly manufactured
- 7227.90.2030 Of tool steel (other than high-speed steel), Of ball-bearing steel
- 7227.90.2060 Of tool steel (other than high-speed steel)
- 7227.90.6005 Of high-nickel alloy steel
- 7227.90.6010 Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
- 7227.90.6020 Of welding quality wire rods of a kind described in statistical note 7 to this chapter
- 7227.90.6030 Of a circular cross section
- 7227.90.6035 Of a circular cross section
- 7227.90.6040 Of a circular cross section
- 7227.90.6090 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7228 Other bars and rods of other alloy steel
- 7228.10.0010 Bars and rods, of high-speed steel, Not cold-formed
- 7228.10.0030 Bars and rods, of high-speed steel, Cold-formed
- 7228.10.0060 Bars and rods, of high-speed steel, Cold-formed
- 7228.20.1000 Bars and rods, of silico-manganese steel, Not cold-formed
- 7228.20.5000 Bars and rods, of silico-manganese steel, Cold-formed
- 7228.30.2000 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of tool steel (other than high-speed steel), Of ball-bearing steel
- 7228.30.4000 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of tool steel (other than high-speed steel), Of chipper knife steel, not cold-formed
- 7228.30.6000 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of tool steel (other than high-speed steel)
- 7228.30.8005 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of high-nickel alloy steel
- 7228.30.8010 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Concrete reinforcing bars and rods
- 7228.30.8015 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other
- 7228.30.8041 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other
- 7228.30.8045 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other
- 7228.30.8070 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other
- 7228.40.0000 Other bars and rods, not further worked than forged
- 7228.50.1010 Other bars and rods, not further worked than cold-formed or cold-finished, Of tool steel (other than high-speed steel), Of ball-bearing steel
- 7228.50.1020 Of round or rectangular cross section with surfaces ground, milled or polished
- 7228.50.1040 Other bars and rods, not further worked than cold-formed or cold-finished, Of tool steel (other than high-speed steel), Other, With a maximum cross-sectional dimension of less than 18 mm
- 7228.50.1060 Of round or rectangular cross section with surfaces ground, milled or polished
- 7228.50.1080 Other bars and rods, not further worked than cold-formed or cold-finished, Of tool steel (other than high-speed steel), Other, With a maximum cross-sectional dimension of 18 mm or more
- 7228.50.5005 Other bars and rods, not further worked than cold-formed or cold-finished, Of high-nickel alloy steel
- 7228.50.5015 Other bars and rods, not further worked than cold-formed or cold-finished, Other
- 7228.50.5040 Other bars and rods, not further worked than cold-formed or cold-finished, Other
- 7228.50.5070 Other bars and rods, not further worked than cold-formed or cold-finished, Other
- 7228.60.1030 Other bars and rods, Of tool steel (other than high-speed steel), Of ball-bearing steel
- 7228.60.1060 Other bars and rods, Of tool steel (other than high-speed steel)
- 7228.60.6000 Other bars and rods, Other, Not cold-formed
- 7228.60.8000 Other bars and rods, Other, Cold-formed
- 7228.70.3010 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, U, I, H and T sections
- 7228.70.3020 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, Other, With a maximum cross-sectional dimension of 76 mm or more, Angles
- 7228.70.3041 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, Other, With a maximum cross-sectional dimension of 76 mm or more
- 7228.70.3060 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, Other, With a maximum cross-sectional dimension of less than 76 mm, Angles
- 7228.70.3081 Angles, shapes and sections, Hot-rolled, not drilled, not punched and not otherwise advanced, Other, With a maximum cross-sectional dimension of less than 76 mm
- 7228.70.6000 Angles, shapes and sections
- 7228.80.0000 Hollow drill bars and rods
7229 Wire of other alloy steel
- 7229.20.0010 Of silico-manganese steel, Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding, Plated or coated with copper
- 7229.20.0015 Of silico-manganese steel, Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding
- 7229.20.0090 Of silico-manganese steel
- 7229.90.0500 Of high-speed steel
- 7229.90.1000 Other, Flat wire
- 7229.90.5006 Other, Round wire, With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding, Plated or coated with copper
- 7229.90.5008 Other, Round wire, With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding
- 7229.90.5016 Other, Round wire, Other
- 7229.90.5031 Other, Round wire, Other
- 7229.90.5051 Other, Round wire, Other
- 7229.90.9000 Other, Other wire
No tariff lines match your filter
Try a 4-digit heading, or a different product term.